From: Simon Arlott <simon@fire.lp0.eu>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-media@vger.kernel.org, mchehab@redhat.com
Subject: 2.6.39 "tuner-core: remove usage of DIGITAL_TV" breaks saa7134 with mt2050
Date: Tue, 12 Jul 2011 22:21:12 +0100 [thread overview]
Message-ID: <4E1CBAC8.2030404@simon.arlott.org.uk> (raw)
[-- Attachment #1: Type: text/plain, Size: 1085 bytes --]
commit ad020dc2fe9039628cf6cef42cd1b76531ee8411
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date: Tue Feb 15 09:30:50 2011 -0200
[media] tuner-core: remove usage of DIGITAL_TV
tuner-core has no business to do with digital TV. So, don't use
T_DIGITAL_TV on it, as it has no code to distinguish between
them, and nobody fills T_DIGITAL_TV right.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This breaks my Pinnacle PCTV 300i DVB-T cards as they can no longer tune
DVB-T.
[ 540.010030] tuner 3-0043: Tuner doesn't support mode 3. Putting tuner to sleep
[ 540.011017] tuner 2-0043: Tuner doesn't support mode 3. Putting tuner to sleep
[ 540.012012] tuner 3-0060: Tuner doesn't support mode 3. Putting tuner to sleep
[ 540.013029] tuner 2-0060: Tuner doesn't support mode 3. Putting tuner to sleep
saa7134 needs to indicate digital TV tuning to mt20xx but it looks like
tuner-core no longer has any way to allow a tuner to indicate support
for this?
(mt2050_set_tv_freq in mt20xx.c uses V4L2_TUNER_DIGITAL_TV)
--
Simon Arlott
[-- Attachment #2: saa7134-dmesg-2.6 --]
[-- Type: text/plain, Size: 6010 bytes --]
calling saa7134_init+0x0/0x4a @ 1
saa7130/34: v4l2 driver version 0.2.16 loaded
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 16
saa7134 0000:05:00.0: PCI INT A -> Link[LNED] -> GSI 16 (level, low) -> IRQ 16
saa7134[0]: found at 0000:05:00.0, rev: 1, irq: 16, latency: 64, mmio: 0xfdfffc00
saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
saa7134[0]: board init: gpio is cc06000
saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 11 e1 a1 ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: 00 30 8d 18 3b 02 ff ff 74 50 ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 2-0043: chip found @ 0x86 (saa7134[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner 2-0043: type set to tda9887
tuner 2-0043: tv freq set to 0.00
tuner 2-0043: TV freq (0.00) out of range (44-958)
tuner 2-0043: saa7134[0] tuner I2C addr 0x86 with type 74 used for 0x0e
Chip ID is not zero. It is not a TEA5767
tuner 2-0060: Setting mode_mask to 0x0e
tuner 2-0060: chip found @ 0xc0 (saa7134[0])
tuner 2-0060: tuner 0x60: Tuner type absent
tuner 2-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00
tuner 2-0043: set addr discarded for type 74, mask e. Asked to change tuner at addr 0xff, with mask e
tuner 2-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00
tuner 2-0060: defining GPIO callback
mt20xx 2-0060: microtune: companycode=3cbf part=42 rev=1c
mt20xx 2-0060: microtune MT2050 found, OK
tuner 2-0060: type set to MT2050
tuner 2-0060: tv freq set to 400.00
tuner 2-0060: saa7134[0] tuner I2C addr 0xc0 with type 33 used for 0x0e
tuner 2-0043: switching to v4l2
tuner 2-0060: switching to v4l2
tuner 2-0060: tv freq set to 400.00
tuner 2-0060: tv freq set to 400.00
tuner 2-0043: Putting tuner to sleep
tuner 2-0043: Cmd s_power accepted for analog TV
tuner 2-0060: Putting tuner to sleep
tuner 2-0060: Cmd s_power accepted for analog TV
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134 0000:05:02.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
saa7134[1]: found at 0000:05:02.0, rev: 1, irq: 18, latency: 64, mmio: 0xfdfff800
saa7134[1]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
saa7134[1]: board init: gpio is c806000
saa7134[1]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[1]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
saa7134[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 60: 0c 22 17 44 03 27 32 08 ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 70: 00 30 8d 18 c8 4b ff ff 34 60 ff ff ff ff ff ff
saa7134[1]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 3-0043: chip found @ 0x86 (saa7134[1])
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
tuner 3-0043: type set to tda9887
tuner 3-0043: tv freq set to 0.00
tuner 3-0043: TV freq (0.00) out of range (44-958)
tuner 3-0043: saa7134[1] tuner I2C addr 0x86 with type 74 used for 0x0e
Chip ID is not zero. It is not a TEA5767
tuner 3-0060: Setting mode_mask to 0x0e
tuner 3-0060: chip found @ 0xc0 (saa7134[1])
tuner 3-0060: tuner 0x60: Tuner type absent
tuner 3-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00
tuner 3-0043: set addr discarded for type 74, mask e. Asked to change tuner at addr 0xff, with mask e
tuner 3-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x0e, config=0x00
tuner 3-0060: defining GPIO callback
mt20xx 3-0060: microtune: companycode=3cbf part=42 rev=22
mt20xx 3-0060: microtune MT2050 found, OK
tuner 3-0060: type set to MT2050
tuner 3-0060: tv freq set to 400.00
tuner 3-0060: saa7134[1] tuner I2C addr 0xc0 with type 33 used for 0x0e
tuner 3-0043: switching to v4l2
tuner 3-0060: switching to v4l2
tuner 3-0060: tv freq set to 400.00
tuner 3-0060: tv freq set to 400.00
tuner 3-0043: Putting tuner to sleep
tuner 3-0043: Cmd s_power accepted for analog TV
tuner 3-0060: Putting tuner to sleep
tuner 3-0060: Cmd s_power accepted for analog TV
saa7134[1]: registered device video1 [v4l2]
saa7134[1]: registered device vbi1
initcall saa7134_init+0x0/0x4a returned 0 after 372541 usecs
[-- Attachment #3: saa7134-dmesg-3.0 --]
[-- Type: text/plain, Size: 5761 bytes --]
calling saa7134_init+0x0/0x4a @ 1
saa7130/34: v4l2 driver version 0.2.16 loaded
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 16
saa7134 0000:05:00.0: PCI INT A -> Link[LNED] -> GSI 16 (level, low) -> IRQ 16
saa7134[0]: found at 0000:05:00.0, rev: 1, irq: 16, latency: 64, mmio: 0xfdfffc00
saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
saa7134[0]: board init: gpio is c806000
saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: 0c 22 17 44 03 11 e1 a1 ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: 00 30 8d 18 3b 02 ff ff 74 50 ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner 2-0043: type set to tda9887
tuner 2-0043: tv freq set to 400.00
tuner 2-0043: saa7134[0] tuner I2C addr 0x86 with type 74 used for 0x06
tuner 2-0043: Tuner 74 found with type(s) Radio TV.
Chip ID is not zero. It is not a TEA5767
tuner 2-0060: Setting mode_mask to 0x06
tuner 2-0060: tuner 0x60: Tuner type absent
tuner 2-0060: Tuner -1 found with type(s) Radio TV.
tuner 2-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x06, config=0x00
tuner 2-0043: set addr discarded for type 74, mask 6. Asked to change tuner at addr 0xff, with mask 6
tuner 2-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x06, config=0x00
tuner 2-0060: defining GPIO callback
mt20xx 2-0060: microtune: companycode=3cbf part=42 rev=22
mt20xx 2-0060: microtune MT2050 found, OK
tuner 2-0060: type set to MT2050
tuner 2-0060: tv freq set to 400.00
tuner 2-0060: saa7134[0] tuner I2C addr 0xc0 with type 33 used for 0x06
tuner 2-0043: tv freq set to 400.00
tuner 2-0060: tv freq set to 400.00
tuner 2-0043: tv freq set to 400.00
tuner 2-0060: tv freq set to 400.00
tuner 2-0043: Putting tuner to sleep
tuner 2-0060: Putting tuner to sleep
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134 0000:05:02.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
saa7134[1]: found at 0000:05:02.0, rev: 1, irq: 18, latency: 64, mmio: 0xfdfff800
saa7134[1]: subsystem: 11bd:002d, board: Pinnacle PCTV 300i DVB-T + PAL [card=50,autodetected]
saa7134[1]: board init: gpio is c806000
saa7134[1]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[1]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff ff
saa7134[1]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 40: ff 16 00 c0 86 3c 01 01 ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 60: 0c 22 17 44 03 27 32 08 ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 70: 00 30 8d 18 c8 4b ff ff 34 60 ff ff ff ff ff ff
saa7134[1]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[1]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
tuner 3-0043: type set to tda9887
tuner 3-0043: tv freq set to 400.00
tuner 3-0043: saa7134[1] tuner I2C addr 0x86 with type 74 used for 0x06
tuner 3-0043: Tuner 74 found with type(s) Radio TV.
Chip ID is not zero. It is not a TEA5767
tuner 3-0060: Setting mode_mask to 0x06
tuner 3-0060: tuner 0x60: Tuner type absent
tuner 3-0060: Tuner -1 found with type(s) Radio TV.
tuner 3-0043: Calling set_type_addr for type=33, addr=0xff, mode=0x06, config=0x00
tuner 3-0043: set addr discarded for type 74, mask 6. Asked to change tuner at addr 0xff, with mask 6
tuner 3-0060: Calling set_type_addr for type=33, addr=0xff, mode=0x06, config=0x00
tuner 3-0060: defining GPIO callback
mt20xx 3-0060: microtune: companycode=3cbf part=42 rev=22
mt20xx 3-0060: microtune MT2050 found, OK
tuner 3-0060: type set to MT2050
tuner 3-0060: tv freq set to 400.00
tuner 3-0060: saa7134[1] tuner I2C addr 0xc0 with type 33 used for 0x06
tuner 3-0043: tv freq set to 400.00
tuner 3-0060: tv freq set to 400.00
tuner 3-0043: tv freq set to 400.00
tuner 3-0060: tv freq set to 400.00
tuner 3-0043: Putting tuner to sleep
tuner 3-0060: Putting tuner to sleep
saa7134[1]: registered device video1 [v4l2]
saa7134[1]: registered device vbi1
initcall saa7134_init+0x0/0x4a returned 0 after 380347 usecs
next reply other threads:[~2011-07-12 21:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-12 21:21 Simon Arlott [this message]
2011-07-13 4:23 ` 2.6.39 "tuner-core: remove usage of DIGITAL_TV" breaks saa7134 with mt2050 Mauro Carvalho Chehab
2011-07-13 23:15 ` Simon Arlott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E1CBAC8.2030404@simon.arlott.org.uk \
--to=simon@fire.lp0.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.