From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mihai Moldovan Date: Sun, 17 Jul 2011 04:10:31 +0200 Subject: [ath9k-devel] 802.11n PCI-E 300Mbps with AP mode? In-Reply-To: References: <4E1F5542.6000906@ionic.de> <4E20DB11.7060604@ionic.de> <4E21F1B5.7080908@ionic.de> Message-ID: <4E224497.9020308@ionic.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org * On 17.07.2011 03:58 AM, Adrian Chadd wrote: > I'm not sure. > > txpower 0 (dBm) is a legitimate value. The AR5416/AR9130/AR9160 go > down to this value. It's not 0 mW, it's just $SMALL mW. I see, thanks. :) > The AR9280 and later NICs can go down to -5 dBm. Interestingly, this won't work on Linux with my AR9380: 250 [0 running job(s)] {history#4338} 4:09:10 11-07-17 root at valery~# iwconfig wlan1 txpower -5 Error for wireless request "Set Tx Power" (8B26) : SET failed on device wlan1 ; Invalid argument. Obviously negative values are not allowed (neither -4, -3, -2 or -1 works but interestingly -0...) Just for reference. :) Best regards, Mihai -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 4369 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20110717/bcbc596a/attachment.bin