From: Tushar Behera <tushar.behera@linaro.org>
To: Sachin Kamat <sachin.kamat@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, snow.jhkim@gmail.com,
jhkim@insignal.co.kr, kgene.kim@samsung.com,
linux@arm.linux.org.uk, patches@linaro.org,
linaro-dev@lists.linaro.org
Subject: Re: [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board
Date: Thu, 21 Jul 2011 10:10:08 +0530 [thread overview]
Message-ID: <4E27ADA8.2050604@linaro.org> (raw)
In-Reply-To: <CAK9yfHzbfEMTdhBk21o2BXSo_doDmdi9Oh=fStZT5aQVeYsCxw@mail.gmail.com>
On Thursday 21 July 2011 10:02 AM, Sachin Kamat wrote:
> On 21 July 2011 09:27, Tushar Behera<tushar.behera@linaro.org> wrote:
>
>> From: JeongHyeon Kim<jhkim@insignal.co.kr>
>>
>> Insignal's ORIGEN board is based Samsung EXYNOS4210 SoC.
>>
>> Signed-off-by: JeongHyeon Kim<jhkim@insignal.co.kr>
>> Signed-off-by: Tushar Behera<tushar.behera@linaro.org>
>> ---
>>
>> Changes for V2:
>> - Reworked based on Kukjin's comments and rebased to kgene/for-next
>>
>> arch/arm/mach-exynos4/Kconfig | 10 +++
>> arch/arm/mach-exynos4/Makefile | 1 +
>> arch/arm/mach-exynos4/mach-origen.c | 108
>> +++++++++++++++++++++++++++++++++++
>> 3 files changed, 119 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-exynos4/mach-origen.c
>>
>> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
>> index 52fc172..012c034 100644
>> --- a/arch/arm/mach-exynos4/Kconfig
>> +++ b/arch/arm/mach-exynos4/Kconfig
>> @@ -205,6 +205,16 @@ config MACH_NURI
>> help
>> Machine support for Samsung Mobile NURI Board.
>>
>> +config MACH_ORIGEN
>> + bool "ORIGEN"
>> + select CPU_EXYNOS4210
>> + select S3C_DEV_RTC
>> + select S3C_DEV_WDT
>> + select S3C_DEV_HSMMC2
>> + select EXYNOS4_SETUP_SDHCI
>> + help
>> + Machine support for ORIGEN based on Samsung S5PV310
>>
> Use Exynos4(210) instead of S5PV310.
>
Ok.
Hi Kukjin,
Should I re-submit with this change?
>> +
>> endmenu
>>
>> comment "Configuration for HSMMC bus width"
>> diff --git a/arch/arm/mach-exynos4/Makefile
>> b/arch/arm/mach-exynos4/Makefile
>> index 2a0b682..ebec49c 100644
>> --- a/arch/arm/mach-exynos4/Makefile
>> +++ b/arch/arm/mach-exynos4/Makefile
>> @@ -31,6 +31,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
>> obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
>> obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
>> obj-$(CONFIG_MACH_NURI) += mach-nuri.o
>> +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
>>
>> # device support
>>
>> diff --git a/arch/arm/mach-exynos4/mach-origen.c
>> b/arch/arm/mach-exynos4/mach-origen.c
>> new file mode 100644
>> index 0000000..ed59f86
>> --- /dev/null
>> +++ b/arch/arm/mach-exynos4/mach-origen.c
>> @@ -0,0 +1,108 @@
>> +/* linux/arch/arm/mach-exynos4/mach-origen.c
>> + *
>> + * Copyright (c) 2011 Insignal Co., Ltd.
>> + * http://www.insignal.co.kr/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include<linux/serial_core.h>
>> +#include<linux/gpio.h>
>> +#include<linux/mmc/host.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/io.h>
>> +#include<linux/input.h>
>> +
>> +#include<asm/mach/arch.h>
>> +#include<asm/mach-types.h>
>> +
>> +#include<plat/regs-serial.h>
>> +#include<plat/exynos4.h>
>> +#include<plat/cpu.h>
>> +#include<plat/devs.h>
>> +#include<plat/sdhci.h>
>> +#include<plat/iic.h>
>> +
>> +#include<mach/map.h>
>> +
>> +/* Following are default values for UCON, ULCON and UFCON UART registers
>> */
>> +#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
>> + S3C2410_UCON_RXILEVEL | \
>> + S3C2410_UCON_TXIRQMODE | \
>> + S3C2410_UCON_RXIRQMODE | \
>> + S3C2410_UCON_RXFIFO_TOI | \
>> + S3C2443_UCON_RXERR_IRQEN)
>> +
>> +#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
>> +
>> +#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
>> + S5PV210_UFCON_TXTRIG4 | \
>> + S5PV210_UFCON_RXTRIG4)
>> +
>> +static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
>> + [0] = {
>> + .hwport = 0,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [1] = {
>> + .hwport = 1,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [2] = {
>> + .hwport = 2,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [3] = {
>> + .hwport = 3,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> +};
>> +
>> +static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
>> + .cd_type = S3C_SDHCI_CD_GPIO,
>> + .ext_cd_gpio = EXYNOS4_GPK2(2),
>> + .ext_cd_gpio_invert = 1,
>> + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
>> +};
>> +
>> +static struct platform_device *origen_devices[] __initdata = {
>> +&s3c_device_hsmmc2,
>> +&s3c_device_rtc,
>> +&s3c_device_wdt,
>> +};
>> +
>> +static void __init origen_map_io(void)
>> +{
>> + s5p_init_io(NULL, 0, S5P_VA_CHIPID);
>> + s3c24xx_init_clocks(24000000);
>> + s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
>> +}
>> +
>> +static void __init origen_machine_init(void)
>> +{
>> + s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
>> + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>> +}
>> +
>> +MACHINE_START(ORIGEN, "ORIGEN")
>> + /* Maintainer: JeongHyeon Kim<jhkim@insignal.co.kr> */
>> + .boot_params = S5P_PA_SDRAM + 0x100,
>> + .init_irq = exynos4_init_irq,
>> + .map_io = origen_map_io,
>> + .init_machine = origen_machine_init,
>> + .timer =&exynos4_timer,
>> +MACHINE_END
>> --
>> 1.7.4.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
--
Tushar Behera
WARNING: multiple messages have this Message-ID (diff)
From: tushar.behera@linaro.org (Tushar Behera)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board
Date: Thu, 21 Jul 2011 10:10:08 +0530 [thread overview]
Message-ID: <4E27ADA8.2050604@linaro.org> (raw)
In-Reply-To: <CAK9yfHzbfEMTdhBk21o2BXSo_doDmdi9Oh=fStZT5aQVeYsCxw@mail.gmail.com>
On Thursday 21 July 2011 10:02 AM, Sachin Kamat wrote:
> On 21 July 2011 09:27, Tushar Behera<tushar.behera@linaro.org> wrote:
>
>> From: JeongHyeon Kim<jhkim@insignal.co.kr>
>>
>> Insignal's ORIGEN board is based Samsung EXYNOS4210 SoC.
>>
>> Signed-off-by: JeongHyeon Kim<jhkim@insignal.co.kr>
>> Signed-off-by: Tushar Behera<tushar.behera@linaro.org>
>> ---
>>
>> Changes for V2:
>> - Reworked based on Kukjin's comments and rebased to kgene/for-next
>>
>> arch/arm/mach-exynos4/Kconfig | 10 +++
>> arch/arm/mach-exynos4/Makefile | 1 +
>> arch/arm/mach-exynos4/mach-origen.c | 108
>> +++++++++++++++++++++++++++++++++++
>> 3 files changed, 119 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-exynos4/mach-origen.c
>>
>> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
>> index 52fc172..012c034 100644
>> --- a/arch/arm/mach-exynos4/Kconfig
>> +++ b/arch/arm/mach-exynos4/Kconfig
>> @@ -205,6 +205,16 @@ config MACH_NURI
>> help
>> Machine support for Samsung Mobile NURI Board.
>>
>> +config MACH_ORIGEN
>> + bool "ORIGEN"
>> + select CPU_EXYNOS4210
>> + select S3C_DEV_RTC
>> + select S3C_DEV_WDT
>> + select S3C_DEV_HSMMC2
>> + select EXYNOS4_SETUP_SDHCI
>> + help
>> + Machine support for ORIGEN based on Samsung S5PV310
>>
> Use Exynos4(210) instead of S5PV310.
>
Ok.
Hi Kukjin,
Should I re-submit with this change?
>> +
>> endmenu
>>
>> comment "Configuration for HSMMC bus width"
>> diff --git a/arch/arm/mach-exynos4/Makefile
>> b/arch/arm/mach-exynos4/Makefile
>> index 2a0b682..ebec49c 100644
>> --- a/arch/arm/mach-exynos4/Makefile
>> +++ b/arch/arm/mach-exynos4/Makefile
>> @@ -31,6 +31,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
>> obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
>> obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
>> obj-$(CONFIG_MACH_NURI) += mach-nuri.o
>> +obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
>>
>> # device support
>>
>> diff --git a/arch/arm/mach-exynos4/mach-origen.c
>> b/arch/arm/mach-exynos4/mach-origen.c
>> new file mode 100644
>> index 0000000..ed59f86
>> --- /dev/null
>> +++ b/arch/arm/mach-exynos4/mach-origen.c
>> @@ -0,0 +1,108 @@
>> +/* linux/arch/arm/mach-exynos4/mach-origen.c
>> + *
>> + * Copyright (c) 2011 Insignal Co., Ltd.
>> + * http://www.insignal.co.kr/
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include<linux/serial_core.h>
>> +#include<linux/gpio.h>
>> +#include<linux/mmc/host.h>
>> +#include<linux/platform_device.h>
>> +#include<linux/io.h>
>> +#include<linux/input.h>
>> +
>> +#include<asm/mach/arch.h>
>> +#include<asm/mach-types.h>
>> +
>> +#include<plat/regs-serial.h>
>> +#include<plat/exynos4.h>
>> +#include<plat/cpu.h>
>> +#include<plat/devs.h>
>> +#include<plat/sdhci.h>
>> +#include<plat/iic.h>
>> +
>> +#include<mach/map.h>
>> +
>> +/* Following are default values for UCON, ULCON and UFCON UART registers
>> */
>> +#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
>> + S3C2410_UCON_RXILEVEL | \
>> + S3C2410_UCON_TXIRQMODE | \
>> + S3C2410_UCON_RXIRQMODE | \
>> + S3C2410_UCON_RXFIFO_TOI | \
>> + S3C2443_UCON_RXERR_IRQEN)
>> +
>> +#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
>> +
>> +#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
>> + S5PV210_UFCON_TXTRIG4 | \
>> + S5PV210_UFCON_RXTRIG4)
>> +
>> +static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
>> + [0] = {
>> + .hwport = 0,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [1] = {
>> + .hwport = 1,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [2] = {
>> + .hwport = 2,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> + [3] = {
>> + .hwport = 3,
>> + .flags = 0,
>> + .ucon = ORIGEN_UCON_DEFAULT,
>> + .ulcon = ORIGEN_ULCON_DEFAULT,
>> + .ufcon = ORIGEN_UFCON_DEFAULT,
>> + },
>> +};
>> +
>> +static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
>> + .cd_type = S3C_SDHCI_CD_GPIO,
>> + .ext_cd_gpio = EXYNOS4_GPK2(2),
>> + .ext_cd_gpio_invert = 1,
>> + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
>> +};
>> +
>> +static struct platform_device *origen_devices[] __initdata = {
>> +&s3c_device_hsmmc2,
>> +&s3c_device_rtc,
>> +&s3c_device_wdt,
>> +};
>> +
>> +static void __init origen_map_io(void)
>> +{
>> + s5p_init_io(NULL, 0, S5P_VA_CHIPID);
>> + s3c24xx_init_clocks(24000000);
>> + s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
>> +}
>> +
>> +static void __init origen_machine_init(void)
>> +{
>> + s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
>> + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>> +}
>> +
>> +MACHINE_START(ORIGEN, "ORIGEN")
>> + /* Maintainer: JeongHyeon Kim<jhkim@insignal.co.kr> */
>> + .boot_params = S5P_PA_SDRAM + 0x100,
>> + .init_irq = exynos4_init_irq,
>> + .map_io = origen_map_io,
>> + .init_machine = origen_machine_init,
>> + .timer =&exynos4_timer,
>> +MACHINE_END
>> --
>> 1.7.4.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-samsung-soc" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
>
>
--
Tushar Behera
next prev parent reply other threads:[~2011-07-21 4:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 3:57 [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board Tushar Behera
2011-07-21 3:57 ` Tushar Behera
[not found] ` <1311220670-20395-1-git-send-email-tushar.behera-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2011-07-21 4:32 ` Sachin Kamat
2011-07-21 4:40 ` Tushar Behera [this message]
2011-07-21 4:40 ` Tushar Behera
2011-07-21 7:53 ` Kukjin Kim
2011-07-21 7:53 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E27ADA8.2050604@linaro.org \
--to=tushar.behera@linaro.org \
--cc=jhkim@insignal.co.kr \
--cc=kgene.kim@samsung.com \
--cc=linaro-dev@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=patches@linaro.org \
--cc=sachin.kamat@linaro.org \
--cc=snow.jhkim@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.