[PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state

[santosh.shilimkar@ti.com (Santosh Shilimkar)]

On 7/21/2011 3:57 PM, Lorenzo Pieralisi wrote:
> On Thu, Jul 21, 2011 at 09:32:12AM +0100, Santosh Shilimkar wrote:
>> Lorenzo, Colin,
>>
>> On 7/7/2011 9:20 PM, Lorenzo Pieralisi wrote:
>>> From: Colin Cross<ccross@android.com>
>>>
>>> When the cpu is powered down in a low power mode, the gic cpu
>>> interface may be reset, and when the cpu complex is powered
>>> down, the gic distributor may also be reset.
>>>
>>> This patch uses CPU_PM_ENTER and CPU_PM_EXIT notifiers to save
>>> and restore the gic cpu interface registers, and the
>>> CPU_COMPLEX_PM_ENTER and CPU_COMPLEX_PM_EXIT notifiers to save
>>> and restore the gic distributor registers.
>>>
>>> Signed-off-by: Colin Cross<ccross@android.com>
>>> ---
>>>    arch/arm/common/gic.c |  212 +++++++++++++++++++++++++++++++++++++++++++++++++
>>>    1 files changed, 212 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
>>> index 4ddd0a6..8d62e07 100644
>>> --- a/arch/arm/common/gic.c
>>> +++ b/arch/arm/common/gic.c
>>
>> [...]
>>
>> I missed one more comment in the last review.
>>
>>> +static int gic_notifier(struct notifier_block *self, unsigned long cmd,	void *v)
>>> +{
>>> +	int i;
>>> +
>>> +	for (i = 0; i<   MAX_GIC_NR; i++) {
>>> +		switch (cmd) {
>>> +		case CPU_PM_ENTER:
>>> +			gic_cpu_save(i);
>> On OMAP, GIC cpu interface context is lost only when CPU cluster
>> is powered down.
>
> Yes, it's true, but that's the only chance we have to save the GIC CPU IF
> state if the GIC context is lost, right ?
> It is a private memory map per processor; I agree, it might be useless
> if just one CPU is shutdown, but at that point in time you do not know
> the state of other CPUs. If the cluster moves to a state where GIC context
> is lost at least you had the GIC CPU IF state saved. If we do not
> save it, well, there is no way to do that anymore since the last CPU cannot
> access other CPUs GIC CPU IF registers (or better, banked GIC distributor
> registers).
> If you force hotplug on CPUs other than 0 (that's the way it is done on OMAP4
> in cpuidle, right ?) to hit deep low-power states you reinit the GIC CPU IF
> state as per cold boot, so yes, it is useless there.
>
Actually, on OMAP there is no need to save any CPU interface registers.

For my OMAP4 PM rebasing, for time-being I will go with exported
GIC functions so that I don't have too many redundancies with GIC
save/restore code.

Regards
Santosh