All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@mvista.com>
To: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org>
Cc: linux-ide@vger.kernel.org, s.hauer@pengutronix.de, jgarzik@pobox.com
Subject: Re: [patch 1/1] ata: Add iMX pata support
Date: Fri, 22 Jul 2011 15:52:38 +0400	[thread overview]
Message-ID: <4E296486.7090504@ru.mvista.com> (raw)
In-Reply-To: <20110722104659.733097200@rtp-net.org>

Hello.

On 22-07-2011 14:46, Arnaud Patard (Rtp) wrote:

> Add basic support for pata on iMX. It has been tested only on imx51.
> SDMA support will probably be added later so this version supports only
> PIO.

> v2:
>    - enable only when needed IORDY
>    - use dev_get_drvdata

    Shouldn't this be under --- tearline?

> Signed-off-by: Arnaud Patard<arnaud.patard@rtp-net.org>
[...]
> Index: linux-2.6-submit/drivers/ata/pata_imx.c
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6-submit/drivers/ata/pata_imx.c	2011-07-22 12:46:29.000000000 +0200
> @@ -0,0 +1,260 @@
[...]
> +static int __devinit pata_imx_probe(struct platform_device *pdev)
> +{
> +	struct ata_host *host;
> +	struct ata_port *ap;
> +	struct pata_imx_priv *priv;
> +	int irq = 0;
> +	struct resource *io_res;
> +	struct resource *irq_res;
> +
> +	io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (io_res == NULL)
> +		return -EINVAL;
> +
> +	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> +	if (irq_res == NULL)
> +		return -EINVAL;
> +	irq = irq_res->start;

    Using platfrom_get_irq() would have been somewhat simpler -- you don't 
need 'irq_res' at all...

> +free_priv:
> +	if (priv->clk)
> +		clk_disable(priv->clk);

    Need to call clk_put() also...

> +	kfree(priv);
> +	return -ENOMEM;
> +}
> +
> +static int __devexit pata_imx_remove(struct platform_device *pdev)
> +{
> +	struct ata_host *host = dev_get_drvdata(&pdev->dev);
> +	struct pata_imx_priv *priv = host->private_data;
> +
> +	ata_host_detach(host);
> +
> +	__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
> +
> +	if (priv->clk)
> +		clk_disable(priv->clk);

    Same here...

> +#ifdef CONFIG_PM
> +static int pata_imx_suspend(struct device *dev)
> +{
> +	struct ata_host *host = dev_get_drvdata(dev);
> +	struct pata_imx_priv *priv = host->private_data;
> +	int ret;
> +
> +	ret = ata_host_suspend(host, PMSG_SUSPEND);
> +	if (!ret)
> +		__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
> +
> +	if (priv->clk)
> +		clk_disable(priv->clk);
> +
> +	return ret;
> +}
> +
> +static int pata_imx_resume(struct device *dev)
> +{
> +	struct ata_host *host = dev_get_drvdata(dev);
> +	struct pata_imx_priv *priv = host->private_data;
> +
> +	if (priv->clk)
> +		clk_enable(priv->clk);
> +
> +	__raw_writel(PATA_IMX_ATA_CTRL_FIFO_RST_B |
> +			PATA_IMX_ATA_CTRL_ATA_RST_B,
> +			priv->host_regs + PATA_IMX_ATA_CONTROL);

    This will disable IORDY.

WBR, Sergei

  reply	other threads:[~2011-07-22 11:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-22 10:46 [patch 1/1] ata: Add iMX pata support Arnaud Patard
2011-07-22 11:52 ` Sergei Shtylyov [this message]
  -- strict thread matches above, loose matches on Subject: below --
2011-07-26 14:58 Arnaud Patard
2011-07-16 21:04 Arnaud Patard
2011-07-17 13:32 ` Sergei Shtylyov
2011-07-21 15:59   ` Arnaud Patard
2011-07-22 11:56     ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E296486.7090504@ru.mvista.com \
    --to=sshtylyov@mvista.com \
    --cc=arnaud.patard@rtp-net.org \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.