From: Gary Thomas <gary@mlbassoc.com>
To: Jeff Mitchell <jmitchell@ll.mit.edu>
Cc: yocto@yoctoproject.org
Subject: Re: Color ghosting on BeagleBoard xM rev C
Date: Tue, 26 Jul 2011 10:47:59 -0600 [thread overview]
Message-ID: <4E2EEFBF.5030804@mlbassoc.com> (raw)
In-Reply-To: <4E205D20.2060106@ll.mit.edu>
On 2011-07-15 09:30, Jeff Mitchell wrote:
> Darren Hart suggested I send this to the list...
>
> Attached is a picture of my screen running Terminal. This is on a BeagleBoard xM rev C connected via its HDMI out to a DVI adapter and then into a Dell UltraSharp monitor. Angstrom
> doesn't display these problems, so the setup should be fine.
>
> I'm not quite sure what is causing this. The resolution is also fairly low, and I haven't had any success using boot parameters (either the older video=omapfb:mode variant or the
> newer DSS2 omapfb.mode variant).
Did you ever find out what is causing this?
When you say that it works on one system (Poky?) vs another (Angstrom?)
are they both running the same version of U-Boot? I'm seeing this same
behaviour on one of my boards, but only when I run U-Boot from 2011.06
BTW - why did you send your original query to the Poky list?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2011-07-26 16:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-15 15:30 Color ghosting on BeagleBoard xM rev C Jeff Mitchell
2011-07-15 18:33 ` Darren Hart
2011-07-15 19:12 ` Koen Kooi
2011-07-15 19:32 ` Jeff Mitchell
2011-07-26 16:47 ` Gary Thomas [this message]
2011-07-26 17:00 ` Jeff Mitchell
2011-07-26 17:15 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E2EEFBF.5030804@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=jmitchell@ll.mit.edu \
--cc=yocto@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.