From: Igor Grinberg <grinberg@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/7] OMAP3: mvblx: Initial support for mvBlueLYNX-X
Date: Wed, 27 Jul 2011 12:57:48 +0300 [thread overview]
Message-ID: <4E2FE11C.9040309@compulab.co.il> (raw)
In-Reply-To: <1311001208-8167-1-git-send-email-michael.jones@matrix-vision.de>
Hi Michael,
On 07/18/11 18:00, Michael Jones wrote:
> Add support for the MATRIX VISION mvBlueLYNX-X, an OMAP3-based
> intelligent camera.
>
> Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
> ---
> Changes for v2:
> - None. Resubmitting to include custodian in cc:
[...]
> new file mode 100644
> index 0000000..1b8a005
> --- /dev/null
> +++ b/board/matrix_vision/mvblx/mvblx.c
[...]
> +
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> + /* board id for Linux */
> + gd->bd->bi_arch_number = MACH_TYPE_MVBLX;
This should be done in the board config file.
Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
--
Regards,
Igor.
next prev parent reply other threads:[~2011-07-27 9:57 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-15 9:09 [U-Boot] [PATCH 0/7] OMAP3: Add support for mvBlueLYNX-X Michael Jones
2011-07-15 9:09 ` [U-Boot] [PATCH 1/7] fpga: add #define for Altera Cyclone EP3C5 Michael Jones
2011-07-28 14:46 ` Wolfgang Denk
2011-07-15 9:09 ` [U-Boot] [PATCH 2/7] fpga: support FPP Cyclone configuration Michael Jones
2011-07-28 14:47 ` Wolfgang Denk
2011-07-15 9:09 ` [U-Boot] [PATCH 3/7] ARMV7: OMAP3: Add 37xx ESx revision numbers Michael Jones
2011-07-18 14:36 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-15 9:09 ` [U-Boot] [PATCH 4/7] mmc: rescan fails on empty slot Michael Jones
2011-07-18 14:40 ` [U-Boot] [PATCH v2 " Michael Jones
2011-08-17 2:15 ` Andy Fleming
2011-08-17 2:30 ` Andy Fleming
2011-08-17 7:46 ` Michael Jones
2011-07-19 2:06 ` [U-Boot] [PATCH " Jaehoon Chung
2011-07-20 8:51 ` Michael Jones
2011-07-20 9:52 ` Jaehoon Chung
2011-07-15 9:09 ` [U-Boot] [PATCH 5/7] mv_common.c: don't compile reset_environment if ENV_IS_NOWHERE Michael Jones
2011-07-18 14:45 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-28 14:49 ` Wolfgang Denk
2011-07-18 17:39 ` [U-Boot] [PATCH " Mike Frysinger
2011-07-15 9:09 ` [U-Boot] [PATCH 6/7] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write Michael Jones
2011-07-18 14:58 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-27 6:07 ` Heiko Schocher
2011-07-27 7:42 ` Michael Jones
2011-07-27 7:53 ` Heiko Schocher
2011-07-27 12:41 ` [U-Boot] [PATCH v3] " Michael Jones
2011-07-27 12:41 ` [U-Boot] [PATCH] ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible Michael Jones
2011-08-01 9:12 ` [U-Boot] [PATCH v3] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write Heiko Schocher
2011-08-01 10:14 ` [U-Boot] [PATCH v4] " Michael Jones
2011-08-02 6:37 ` Heiko Schocher
2011-09-04 17:59 ` Paulraj, Sandeep
2011-09-05 5:34 ` Heiko Schocher
2011-07-27 21:00 ` [U-Boot] [PATCH v2 6/7] " Wolfgang Denk
2011-07-15 9:09 ` [U-Boot] [PATCH 7/7] OMAP3: mvblx: Initial support for mvBlueLYNX-X Michael Jones
2011-07-18 15:00 ` [U-Boot] [PATCH v2 " Michael Jones
2011-07-27 9:57 ` Igor Grinberg [this message]
2011-08-04 13:46 ` [U-Boot] [PATCH v3] " Michael Jones
2011-10-06 22:06 ` Wolfgang Denk
2011-08-17 8:55 ` [U-Boot] [PATCH v4] " Michael Jones
2011-10-06 21:51 ` Wolfgang Denk
2011-10-07 9:06 ` Michael Jones
2011-10-09 19:59 ` Wolfgang Denk
2011-10-05 15:08 ` [U-Boot] [PATCH v5] " Michael Jones
2011-10-10 15:08 ` [U-Boot] [PATCH v6] " Michael Jones
2011-10-18 17:31 ` [U-Boot] [PATCH v5] " Tom Rini
2011-10-19 8:16 ` Michael Jones
2011-10-20 11:37 ` [U-Boot] [PATCH] mv_common.c: get rid of 'defined but not used' warning Michael Jones
2011-10-20 11:48 ` Andre Schwarz
2011-12-03 12:32 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E2FE11C.9040309@compulab.co.il \
--to=grinberg@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.