From: David Anderson <davea42@gmail.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] w83795adg no longer shows up in sensors
Date: Wed, 27 Jul 2011 18:56:05 +0000 [thread overview]
Message-ID: <4E305F45.5080801@gmail.com> (raw)
Just updated my 7046T Supermicro with a minor
update of Ubuntu 10.10 to 2.6.35-30-generic *86_64 SMP.
Intel
Suddenly I find sensors is not finding the w83795adg .
The output of 'sensors' is
w83627hf-isa-0a00
Adapter: ISA adapter
beep_enable:enabled
It's been working (through various kernel updates) using the
'make' etc shown just below after each update. No problem.
Now it fails to work. One change I made was to turn off hyperthreading
in the BIOS (an experiment to see if that speeds or degrades
my running of seti@home), but I would hope that change was irrelevant.
I'm uncertain how to get 'sensors' working again.
Suggestions?
Thanks in advance for any help.
DavidAnderson
---------------
After kernel install and reboot, I did
(this is Jean D's w83795.c . source from January 2011 or so, from
khali.linux-fr.org)
make clean
make
sudo make install
sudo service lm-sensors stop
sudo service lm-sensors start
sudo modprobe w83795
which does not help.
--------------------------------------------------------
dmesg shows:
[ 131.083884] i2c i2c-0: w83795: Detection failed at addr 0x2e, check bank
[ 131.217186] i2c i2c-0: w83795: Detection failed at addr 0x2f, check
i2c addr
[ 692.676771] i2c /dev entries driver
[ 2461.216555] i2c /dev entries driver
-------------------------------
sensors-detect shows, at the final output
BDriver `to-be-written':
* ISA bus, address 0xca2
Chip `IPMI BMC Unknown' (confidence: 8)
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Driver `w83627hf':
* ISA bus, address 0xa00
Chip `Winbond W83627HF/F/HG/G Super IO Sensors' (confidence: 9)
Driver `w83795':
* Bus `SMBus I801 adapter at 0400'
Busdriver `i2c_i801', I2C address 0x2f
Chip `Nuvoton W83795G/ADG' (confidence: 8)
Note: there is no driver for IPMI BMC Unknown yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
reply other threads:[~2011-07-27 18:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E305F45.5080801@gmail.com \
--to=davea42@gmail.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.