Re: Seagate harddrives problems with SB7x0 AHCI

[William King <quentusrex@gmail.com>]

Correction: The fio test completes in 4 minutes on Alpha.

On 07/27/2011 06:22 PM, William King wrote:
> Problem:
> I have run into what appears to be a driver problem with the Seagate
> Barracuda 7200.12 drives. The symptom is io load of 10-15 times the load
> for other drives. To the point the box becomes fully io-bound and
> unresponsive when even installing apt packages or rsync of a 100MB file.
>
> Background:
> I have two servers with nearly identical hardware: Alpha has Seagate
> Barracuda 7200.12 1TB drives model: ST31000528AS and Bravo that has
> Western Digital Cavaliar Black 1TB model: 'WDC WD1001FALS-0'. Both
> servers have Ubuntu 11.04 64bit server installed, and have fully updated
> to the 2.3.38-10 kernel. More hardware info and logs can be located
> here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/815540
>
> The server hardware manufacturer page is:
> http://www.supermicro.com/Aplus/system/1U/1042/AS-1042G-TF.cfm
>
> Command outputs:
> # lspci |grep SATA
> 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA
> Controller [AHCI mode]
>
> # uname -a
> Linux alpha-mule 2.6.38-10-server #46-Ubuntu SMP Tue Jun 28 16:31:00 UTC
> 2011 x86_64 x86_64 x86_64 GNU/Linux
>
>
> Steps to confirm/reproduce and narrow scope:
> I have taken the hard drives from Bravo, put them into Alpha reinstalled
> and there is no problem. Also I have placed some older Seagate Barracuda
> 7200.9 80GB drives in Alpha and the problem does not exist then either.
> I used iotop and iostats to watch the reported io load as well as the
> read/write speeds to the disk. I then used rsync with a bandwidth
> limitation to measure the performance difference between the two servers
> in terms of server load and iotop reported IO%.
>
> A cat of /proc/interrupts show an order of magnitude more interrupts for
> ahci on Alpha than Bravo for the same amount of traffic during an rsync.
>
> I have hdparm -t /dev/sda test and have seen a performance of ~50MB/s on
> the Seagate 7200.12 drive while the specs and other benchmarks claim
> speeds of up to 140MB/s. The Western Digital in the same hardware are
> able to reach speeds of ~105MB/s and the Seagate 7200.9 gets ~65MB/s.
> The hard drive was not in use at the time of the hdparm test.
>
> I took a perf capture of a fio random read test on each machines. The
> test completes in 4 seconds on Alpha and 2 minutes 45 seconds on Bravo
> and the perf stats show all the extra time being spent in the kernel
> scheduler section.
>
> I initially had the Seagate hard drives on firmware CC46 then updated
> them to the latest firmware of CC49. No change detected between firmwares.
>
> I have setup alpha to be able to rebuild the Ubuntu Kernel with patches
> so I can easily test new changes. Also I have the linux kernel git tree
> cloned so while it would be possible, I would be more comfortable
> testing on the Ubuntu version of the 2.6.38-10 kernel.
>
> -William King