From: Antti Palosaari <crope@iki.fi>
To: linux-media@vger.kernel.org
Cc: Antti Palosaari <crope@iki.fi>
Subject: [PATCH 3/3] anysee: use multi-frontend (MFE)
Date: Fri, 29 Jul 2011 00:35:48 +0300 [thread overview]
Message-ID: <4E31D634.6090804@iki.fi> (raw)
Signed-off-by: Antti Palosaari <crope@iki.fi>
---
drivers/media/dvb/dvb-usb/anysee.c | 299
++++++++++++++++++++++++-----------
drivers/media/dvb/dvb-usb/anysee.h | 1 +
2 files changed, 206 insertions(+), 94 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/anysee.c
b/drivers/media/dvb/dvb-usb/anysee.c
index 1ec88b6..d4d2420 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -446,6 +446,114 @@ static struct isl6423_config anysee_isl6423_config = {
* IOE[5] STV0903 1=enabled
*/
+static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct anysee_state *state = adap->dev->priv;
+ int ret;
+
+ deb_info("%s: fe=%d onoff=%d\n", __func__, fe->id, onoff);
+
+ /* no frontend sleep control */
+ if (onoff == 0)
+ return 0;
+
+ switch (state->hw) {
+ case ANYSEE_HW_507FA: /* 15 */
+ /* E30 Combo Plus */
+ /* E30 C Plus */
+
+ if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T tuner on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ }
+
+ break;
+ case ANYSEE_HW_508TC: /* 18 */
+ case ANYSEE_HW_508PTC: /* 21 */
+ /* E7 TC */
+ /* E7 PTC */
+
+ if ((fe->id ^ dvb_usb_anysee_delsys) == 0) {
+ /* disable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
+ 0x40);
+ if (ret)
+ goto error;
+
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable IF route on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ } else {
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
+ if (ret)
+ goto error;
+
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+ 0x40);
+ if (ret)
+ goto error;
+
+ /* enable IF route on IOE[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+ 0x01);
+ if (ret)
+ goto error;
+ }
+
+ break;
+ default:
+ ret = 0;
+ }
+
+error:
+ return ret;
+}
+
static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
@@ -466,27 +574,37 @@ static int anysee_frontend_attach(struct
dvb_usb_adapter *adap)
}
};
- /* Check which hardware we have.
- * We must do this call two times to get reliable values (hw bug).
- */
- ret = anysee_get_hw_info(adap->dev, hw_info);
- if (ret)
- goto error;
+ /* detect hardware only once */
+ if (adap->fe[0] == NULL) {
+ /* Check which hardware we have.
+ * We must do this call two times to get reliable values (hw bug).
+ */
+ ret = anysee_get_hw_info(adap->dev, hw_info);
+ if (ret)
+ goto error;
- ret = anysee_get_hw_info(adap->dev, hw_info);
- if (ret)
- goto error;
+ ret = anysee_get_hw_info(adap->dev, hw_info);
+ if (ret)
+ goto error;
+
+ /* Meaning of these info bytes are guessed. */
+ info("firmware version:%d.%d hardware id:%d",
+ hw_info[1], hw_info[2], hw_info[0]);
- /* Meaning of these info bytes are guessed. */
- info("firmware version:%d.%d hardware id:%d",
- hw_info[1], hw_info[2], hw_info[0]);
+ state->hw = hw_info[0];
+ }
- state->hw = hw_info[0];
+ /* set current frondend ID for devices having two frondends */
+ if (adap->fe[0])
+ state->fe_id++;
switch (state->hw) {
case ANYSEE_HW_507T: /* 2 */
/* E30 */
+ if (state->fe_id)
+ break;
+
/* attach demod */
adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config,
&adap->dev->i2c_adap);
@@ -501,6 +619,9 @@ static int anysee_frontend_attach(struct
dvb_usb_adapter *adap)
case ANYSEE_HW_507CD: /* 6 */
/* E30 Plus */
+ if (state->fe_id)
+ break;
+
/* enable DVB-T demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
@@ -512,26 +633,32 @@ static int anysee_frontend_attach(struct
dvb_usb_adapter *adap)
goto error;
/* attach demod */
- adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config,
- &adap->dev->i2c_adap);
+ adap->fe[0] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_config, &adap->dev->i2c_adap);
break;
case ANYSEE_HW_507DC: /* 10 */
/* E30 C Plus */
+ if (state->fe_id)
+ break;
+
/* enable DVB-C demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
goto error;
/* attach demod */
- adap->fe[0] = dvb_attach(tda10023_attach, &anysee_tda10023_config,
- &adap->dev->i2c_adap, 0x48);
+ adap->fe[0] = dvb_attach(tda10023_attach,
+ &anysee_tda10023_config, &adap->dev->i2c_adap, 0x48);
break;
case ANYSEE_HW_507SI: /* 11 */
/* E30 S2 Plus */
+ if (state->fe_id)
+ break;
+
/* enable DVB-S/S2 demod on IOD[0] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
if (ret)
@@ -564,55 +691,59 @@ static int anysee_frontend_attach(struct
dvb_usb_adapter *adap)
if (ret)
goto error;
- if (dvb_usb_anysee_delsys) {
- /* disable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
- 0x20);
+ if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
+ /* disable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+ 0x01);
if (ret)
goto error;
- /* enable DVB-T demod on IOD[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
- 0x01);
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
if (ret)
goto error;
/* attach demod */
if (tmp == 0xc7) {
/* TDA18212 config */
- adap->fe[0] = dvb_attach(zl10353_attach,
- &anysee_zl10353_tda18212_config2,
- &adap->dev->i2c_adap);
+ adap->fe[state->fe_id] = dvb_attach(
+ tda10023_attach,
+ &anysee_tda10023_tda18212_config,
+ &adap->dev->i2c_adap, 0x48);
} else {
/* PLL config */
- adap->fe[0] = dvb_attach(zl10353_attach,
- &anysee_zl10353_config,
- &adap->dev->i2c_adap);
+ adap->fe[state->fe_id] = dvb_attach(
+ tda10023_attach,
+ &anysee_tda10023_config,
+ &adap->dev->i2c_adap, 0x48);
}
} else {
- /* disable DVB-T demod on IOD[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
- 0x01);
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+ 0x20);
if (ret)
goto error;
- /* enable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
- 0x20);
+ /* enable DVB-T demod on IOD[0] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+ 0x01);
if (ret)
goto error;
/* attach demod */
if (tmp == 0xc7) {
/* TDA18212 config */
- adap->fe[0] = dvb_attach(tda10023_attach,
- &anysee_tda10023_tda18212_config,
- &adap->dev->i2c_adap, 0x48);
+ adap->fe[state->fe_id] = dvb_attach(
+ zl10353_attach,
+ &anysee_zl10353_tda18212_config2,
+ &adap->dev->i2c_adap);
} else {
/* PLL config */
- adap->fe[0] = dvb_attach(tda10023_attach,
- &anysee_tda10023_config,
- &adap->dev->i2c_adap, 0x48);
+ adap->fe[state->fe_id] = dvb_attach(
+ zl10353_attach,
+ &anysee_zl10353_config,
+ &adap->dev->i2c_adap);
}
}
@@ -627,52 +758,40 @@ static int anysee_frontend_attach(struct
dvb_usb_adapter *adap)
if (ret)
goto error;
- if (dvb_usb_anysee_delsys) {
- /* disable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
- 0x20);
- if (ret)
- goto error;
-
- /* enable DVB-T demod on IOD[6] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+ if ((state->fe_id ^ dvb_usb_anysee_delsys) == 0) {
+ /* disable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
0x40);
if (ret)
goto error;
- /* enable IF route on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
- 0x01);
+ /* enable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ 0x20);
if (ret)
goto error;
/* attach demod */
- adap->fe[0] = dvb_attach(zl10353_attach,
- &anysee_zl10353_tda18212_config,
- &adap->dev->i2c_adap);
+ adap->fe[state->fe_id] = dvb_attach(tda10023_attach,
+ &anysee_tda10023_tda18212_config,
+ &adap->dev->i2c_adap, 0x48);
} else {
- /* disable DVB-T demod on IOD[6] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 6),
- 0x40);
- if (ret)
- goto error;
-
- /* enable DVB-C demod on IOD[5] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+ /* disable DVB-C demod on IOD[5] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
0x20);
if (ret)
goto error;
- /* enable IF route on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
- 0x01);
+ /* enable DVB-T demod on IOD[6] */
+ ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 6),
+ 0x40);
if (ret)
goto error;
/* attach demod */
- adap->fe[0] = dvb_attach(tda10023_attach,
- &anysee_tda10023_tda18212_config,
- &adap->dev->i2c_adap, 0x48);
+ adap->fe[state->fe_id] = dvb_attach(zl10353_attach,
+ &anysee_zl10353_tda18212_config,
+ &adap->dev->i2c_adap);
}
break;
@@ -681,6 +800,9 @@ static int anysee_frontend_attach(struct
dvb_usb_adapter *adap)
/* E7 S2 */
/* E7 PS2 */
+ if (state->fe_id)
+ break;
+
/* enable transport stream on IOA[7] */
ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
if (ret)
@@ -713,7 +835,7 @@ static int anysee_tuner_attach(struct
dvb_usb_adapter *adap)
struct anysee_state *state = adap->dev->priv;
struct dvb_frontend *fe;
int ret;
- deb_info("%s:\n", __func__);
+ deb_info("%s: fe=%d\n", __func__, state->fe_id);
switch (state->hw) {
case ANYSEE_HW_507T: /* 2 */
@@ -744,28 +866,14 @@ static int anysee_tuner_attach(struct
dvb_usb_adapter *adap)
/* E30 S2 Plus */
/* attach LNB controller */
- fe = dvb_attach(isl6423_attach, adap->fe[0], &adap->dev->i2c_adap,
- &anysee_isl6423_config);
+ fe = dvb_attach(isl6423_attach, adap->fe[0],
+ &adap->dev->i2c_adap, &anysee_isl6423_config);
break;
case ANYSEE_HW_507FA: /* 15 */
/* E30 Combo Plus */
/* E30 C Plus */
- if (dvb_usb_anysee_delsys) {
- /* enable DVB-T tuner on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
- 0x01);
- if (ret)
- goto error;
- } else {
- /* enable DVB-C tuner on IOE[0] */
- ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
- 0x01);
- if (ret)
- goto error;
- }
-
/* Try first attach TDA18212 silicon tuner on IOE[4], if that
* fails attach old simple PLL. */
@@ -775,8 +883,8 @@ static int anysee_tuner_attach(struct
dvb_usb_adapter *adap)
goto error;
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe[0], &adap->dev->i2c_adap,
- &anysee_tda18212_config);
+ fe = dvb_attach(tda18212_attach, adap->fe[state->fe_id],
+ &adap->dev->i2c_adap, &anysee_tda18212_config);
if (fe)
break;
@@ -786,8 +894,9 @@ static int anysee_tuner_attach(struct
dvb_usb_adapter *adap)
goto error;
/* attach tuner */
- fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1),
- &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+ fe = dvb_attach(dvb_pll_attach, adap->fe[state->fe_id],
+ (0xc0 >> 1), &adap->dev->i2c_adap,
+ DVB_PLL_SAMSUNG_DTOS403IH102A);
break;
case ANYSEE_HW_508TC: /* 18 */
@@ -801,8 +910,8 @@ static int anysee_tuner_attach(struct
dvb_usb_adapter *adap)
goto error;
/* attach tuner */
- fe = dvb_attach(tda18212_attach, adap->fe[0], &adap->dev->i2c_adap,
- &anysee_tda18212_config);
+ fe = dvb_attach(tda18212_attach, adap->fe[state->fe_id],
+ &adap->dev->i2c_adap, &anysee_tda18212_config);
break;
case ANYSEE_HW_508S2: /* 19 */
@@ -918,6 +1027,8 @@ static struct dvb_usb_device_properties
anysee_properties = {
.num_adapters = 1,
.adapter = {
{
+ .num_frontends = 2,
+ .frontend_ctrl = anysee_frontend_ctrl,
.streaming_ctrl = anysee_streaming_ctrl,
.frontend_attach = anysee_frontend_attach,
.tuner_attach = anysee_tuner_attach,
diff --git a/drivers/media/dvb/dvb-usb/anysee.h
b/drivers/media/dvb/dvb-usb/anysee.h
index ad6ccd1..57ee500 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -59,6 +59,7 @@ enum cmd {
struct anysee_state {
u8 hw; /* PCB ID */
u8 seq;
+ u8 fe_id:1; /* frondend ID */
};
#define ANYSEE_HW_507T 2 /* E30 */
--
1.7.6
next reply other threads:[~2011-07-28 21:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-28 21:35 Antti Palosaari [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-07-26 0:18 [PATCH 3/3] anysee: use multi-frontend (MFE) Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E31D634.6090804@iki.fi \
--to=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.