From: Shubhrajyoti <shubhrajyoti@ti.com>
To: balbi@ti.com
Cc: "\"Andy Green (林安廸)\"" <andy@warmcat.com>,
linux-omap@vger.kernel.org, linux-i2c@vger.kernel.org,
santosh.shilimkar@ti.com
Subject: Re: [PATCH] OMAP4: I2C: Enable the wakeup in I2C_WE
Date: Fri, 29 Jul 2011 19:11:34 +0530 [thread overview]
Message-ID: <4E32B88E.6030508@ti.com> (raw)
In-Reply-To: <20110729123716.GN31013@legolas.emea.dhcp.ti.com>
On Friday 29 July 2011 06:07 PM, Felipe Balbi wrote:
> Hi,
>
> On Fri, Jul 29, 2011 at 01:28:12PM +0100, "Andy Green (林安廸)" wrote:
>> On 07/29/2011 01:07 PM, Somebody in the thread at some point said:
>>
>> Hi -
>>
>>> - omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
>>> + if (dev->rev< OMAP_I2C_REV_ON_3530_4430)
>>> + omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
>>> + dev->westate);
>>> Andy, can you clarify why you added the revision check which didn't
>>> exist before ?
>>>
>>> [1] http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=commitdiff;h=a3a7acbcc3df4e9ecc12aa1fc435534d74ebbdf4
>>>
>> At the time I wrote the patches back in March, the code there was
>> different: there was a pre-extant test avoiding that line on 4430,
>> and the patch is simply converting it to the new scheme. You can see
>> it here:
>>
>> http://permalink.gmane.org/gmane.linux.ports.arm.omap/54940
>>
>> @@ -379,7 +379,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>> * REVISIT: Some wkup sources might not be needed.
>> */
>> dev->westate = OMAP_I2C_WE_ALL;
>> - if (dev->rev< OMAP_I2C_REV_ON_4430)
>> + if (dev->rev< OMAP_I2C_REV_ON_3530_4430)
>> omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
>> dev->westate);
>> }
>>
>> I guess since March and before this got committed for 3.1, someone
>> got a patch in first removing the test, so when my patchset was
>> uplevelled for commit against 3.1-rc this conflict was dealt with by
>> re-introducing the test.
>>
>> Long story short, it's there from me as a mechanical 1:1 renaming
>> action as part of the fix that 3530 and 4430 (different) IPs return
>> the same rev number. Despite how it now looks I didn't add it, so if
>> Shubhrajyoti has reasons to think it should be gone again I have
>> nothing against that at all.
> yeah, looks like a bad conflict resolution. Shubhrajyoti, care to respin
> the patch and update commit log stating that it is fixing a bad conflict
> resolution or something ?
I wasn't aware of the conflict resolution part. Actually came across this
piece of code as per the discussion on the reset implementation patch
will update
the changelogs.
How about,
From: Shubhrajyoti D<shubhrajyoti@ti.com>
Currently for OMAP4 the I2C_WE is not programmed.
This patch enables the programming for OMAP4.
Fixes a conflict resolution of Andy's patches.
Reported-by: Santosh Shilimkar<santosh.shilimkar@ti.com>
Signed-off-by: Shubhrajyoti D<shubhrajyoti@ti.com>
---
TODO:
Currently all the wakeup sources are enabled.
There is scope of optimising the same. Will revisit it.
Rebased on Kevin's wip/i2c branch
Tested on OMAP4430.
drivers/i2c/busses/i2c-omap.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index d05efe7..18cc0af 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -313,9 +313,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
* REVISIT: Some wakeup sources might not be needed.
*/
dev->westate = OMAP_I2C_WE_ALL;
- if (dev->rev< OMAP_I2C_REV_ON_3530_4430)
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
- dev->westate);
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+ dev->westate);
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-- 1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-07-29 13:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-29 11:48 [PATCH] OMAP4: I2C: Enable the wakeup in I2C_WE Shubhrajyoti D
2011-07-29 12:07 ` Felipe Balbi
[not found] ` <20110729120711.GL31013-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-07-29 12:28 ` "Andy Green (林安廸)"
[not found] ` <4E32A75C.5060400-/Zus8d0mwwtBDgjK7y7TUQ@public.gmane.org>
2011-07-29 12:37 ` Felipe Balbi
2011-07-29 13:41 ` Shubhrajyoti [this message]
[not found] ` <4E32B88E.6030508-l0cyMroinI0@public.gmane.org>
2011-07-29 14:03 ` Felipe Balbi
[not found] ` <CANQgH-YVzcvST=ofs4DYw5e4e_Qb1xO-=T46O6ioxMRDf2mpFg@mail.gmail.com>
[not found] ` <CANQgH-YVzcvST=ofs4DYw5e4e_Qb1xO-=T46O6ioxMRDf2mpFg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-07-29 14:09 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E32B88E.6030508@ti.com \
--to=shubhrajyoti@ti.com \
--cc=andy@warmcat.com \
--cc=balbi@ti.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=santosh.shilimkar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.