From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Timothy D. Lenz" Subject: Re: component device mismatches found: 9600 Date: Mon, 01 Aug 2011 16:25:47 -0700 Message-ID: <4E3735FB.3080103@vorgon.com> References: <4E359DC0.5090608@vorgon.com> <4E370227.2070804@vorgon.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: linux-raid-owner@vger.kernel.org To: =?UTF-8?B?TWF0aGlhcyBCdXLDqW4=?= Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids vorg@x64VDR:~$ sudo smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.34.20100610.1] (local=20 build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.= net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Seagate Barracuda 7200.11 Device Model: ST3500320AS Serial Number: 9QM7M86S LU WWN Device Id: 5 000c50 01059c636 =46irmware Version: SD1A User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Aug 1 16:11:16 2011 MST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activit= y was completed without error. Auto Offline Data Collection:=20 Enabled. Self-test execution status: ( 0) The previous self-test routine=20 completed without error or no self-test=20 has ever been run. Total time to complete Offline data collection: ( 650) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection=20 on/off support. Suspend Offline collection upo= n new command. Offline surface scan supported= =2E Self-test supported. Conveyance Self-test supported= =2E Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer= =2E Error logging capability: (0x01) Error logging supported. General Purpose Logging suppor= ted. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 119) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control=20 supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE=20 UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 100 006 Pre-fail=20 Always - 82804896 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail=20 Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age=20 Always - 13 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail=20 Always - 0 7 Seek_Error_Rate 0x000f 070 060 030 Pre-fail=20 Always - 12546791 9 Power_On_Hours 0x0032 095 095 000 Old_age=20 Always - 4807 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail=20 Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age=20 Always - 13 184 End-to-End_Error 0x0032 100 100 099 Old_age Alway= s=20 - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Alway= s=20 - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Alway= s=20 - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Alway= s=20 - 0 190 Airflow_Temperature_Cel 0x0022 067 065 045 Old_age Alway= s=20 - 33 (Min/Max 30/34) 194 Temperature_Celsius 0x0022 033 040 000 Old_age Alway= s=20 - 33 (0 21 0 0) 195 Hardware_ECC_Recovered 0x001a 054 033 000 Old_age Alway= s=20 - 82804896 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Alway= s=20 - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age=20 Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Alway= s=20 - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. -----------------------------------------------------------------------= -------------------- vorg@x64VDR:~$ sudo smartctl -a /dev/sdb smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.34.20100610.1] (local=20 build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.= net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Seagate Barracuda 7200.11 Device Model: ST3500320AS Serial Number: 9QM1P092 LU WWN Device Id: 5 000c50 0098f53ba =46irmware Version: SD15 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Aug 1 16:12:14 2011 MST =3D=3D> WARNING: There are known problems with these drives, AND THIS FIRMWARE VERSION IS AFFECTED, see the following Seagate web pages: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=3D20= 7931 http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=3D20= 7951 SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activit= y was completed without error. Auto Offline Data Collection:=20 Enabled. Self-test execution status: ( 0) The previous self-test routine=20 completed without error or no self-test=20 has ever been run. Total time to complete Offline data collection: ( 625) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection=20 on/off support. Suspend Offline collection upo= n new command. Offline surface scan supported= =2E Self-test supported. Conveyance Self-test supported= =2E Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer= =2E Error logging capability: (0x01) Error logging supported. General Purpose Logging suppor= ted. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 113) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control=20 supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE=20 UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail=20 Always - 52352187 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail=20 Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age=20 Always - 39 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail=20 Always - 0 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail=20 Always - 64855982 9 Power_On_Hours 0x0032 072 072 000 Old_age=20 Always - 24685 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail=20 Always - 0 12 Power_Cycle_Count 0x0032 100 037 020 Old_age=20 Always - 39 184 End-to-End_Error 0x0032 100 100 099 Old_age Alway= s=20 - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Alway= s=20 - 0 188 Command_Timeout 0x0032 100 098 000 Old_age Alway= s=20 - 20 189 High_Fly_Writes 0x003a 100 100 000 Old_age Alway= s=20 - 0 190 Airflow_Temperature_Cel 0x0022 066 062 045 Old_age Alway= s=20 - 34 (Min/Max 30/35) 194 Temperature_Celsius 0x0022 034 040 000 Old_age Alway= s=20 - 34 (0 22 0 0) 195 Hardware_ECC_Recovered 0x001a 029 023 000 Old_age Alway= s=20 - 52352187 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Alway= s=20 - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age=20 Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Alway= s=20 - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. -----------------------------------------------------------------------= -------------------- vorg@x64VDR:~$ sudo smartctl -a /dev/sdc smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.34.20100610.1] (local=20 build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.= net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Seagate Barracuda 7200.11 Device Model: ST3500320AS Serial Number: 9QM35MY5 LU WWN Device Id: 5 000c50 00b9fbd80 =46irmware Version: SD15 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Aug 1 16:13:15 2011 MST =3D=3D> WARNING: There are known problems with these drives, AND THIS FIRMWARE VERSION IS AFFECTED, see the following Seagate web pages: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=3D20= 7931 http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=3D20= 7951 SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activit= y was completed without error. Auto Offline Data Collection:=20 Enabled. Self-test execution status: ( 0) The previous self-test routine=20 completed without error or no self-test=20 has ever been run. Total time to complete Offline data collection: ( 634) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection=20 on/off support. Suspend Offline collection upo= n new command. Offline surface scan supported= =2E Self-test supported. Conveyance Self-test supported= =2E Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer= =2E Error logging capability: (0x01) Error logging supported. General Purpose Logging suppor= ted. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 113) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control=20 supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE=20 UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail=20 Always - 220520828 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail=20 Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age=20 Always - 39 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail=20 Always - 0 7 Seek_Error_Rate 0x000f 074 060 030 Pre-fail=20 Always - 8642691180 9 Power_On_Hours 0x0032 072 072 000 Old_age=20 Always - 24685 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail=20 Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age=20 Always - 39 184 End-to-End_Error 0x0032 100 100 099 Old_age Alway= s=20 - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Alway= s=20 - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Alway= s=20 - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Alway= s=20 - 0 190 Airflow_Temperature_Cel 0x0022 066 061 045 Old_age Alway= s=20 - 34 (Min/Max 30/36) 194 Temperature_Celsius 0x0022 034 040 000 Old_age Alway= s=20 - 34 (0 22 0 0) 195 Hardware_ECC_Recovered 0x001a 028 021 000 Old_age Alway= s=20 - 220520828 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Alway= s=20 - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age=20 Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Alway= s=20 - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. -----------------------------------------------------------------------= -------------------- vorg@x64VDR:~$ sudo smartctl -a /dev/sdd smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.34.20100610.1] (local=20 build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.= net =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Seagate Barracuda 7200.11 Device Model: ST3500820AS Serial Number: 9QM6V6JF LU WWN Device Id: 5 000c50 009cb8c4c =46irmware Version: SD1A User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Mon Aug 1 16:14:04 2011 MST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activit= y was completed without error. Auto Offline Data Collection:=20 Enabled. Self-test execution status: ( 0) The previous self-test routine=20 completed without error or no self-test=20 has ever been run. Total time to complete Offline data collection: ( 634) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection=20 on/off support. Suspend Offline collection upo= n new command. Offline surface scan supported= =2E Self-test supported. Conveyance Self-test supported= =2E Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer= =2E Error logging capability: (0x01) Error logging supported. General Purpose Logging suppor= ted. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 114) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control=20 supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE=20 UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail=20 Always - 205159952 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail=20 Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age=20 Always - 34 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail=20 Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail=20 Always - 15541587 9 Power_On_Hours 0x0032 088 088 000 Old_age=20 Always - 10726 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail=20 Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age=20 Always - 34 184 End-to-End_Error 0x0032 100 100 099 Old_age Alway= s=20 - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Alway= s=20 - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Alway= s=20 - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Alway= s=20 - 0 190 Airflow_Temperature_Cel 0x0022 065 062 045 Old_age Alway= s=20 - 35 (Min/Max 30/37) 194 Temperature_Celsius 0x0022 035 040 000 Old_age Alway= s=20 - 35 (0 23 0 0) 195 Hardware_ECC_Recovered 0x001a 049 023 000 Old_age Alway= s=20 - 205159952 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Alway= s=20 - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age=20 Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Alway= s=20 - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. -----------------------------------------------------------------------= -------------------- On 8/1/2011 12:49 PM, Mathias Bur=C3=A9n wrote: > On 1 August 2011 20:44, Timothy D. Lenz wrote: >> >> Don't think I have smartctl installed. Tried with/out sudo >> vorg@x64VDR:~$ smartctl -a /dev/sda >> -bash: smartctl: command not found > > So install it, or compile it from source and run it (smartmontools). > It would be interesting to see if you have a problem with > HDDs/controllers/backplanes/cables. > > /M > -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html