Re: [RFC 5/5] [powerpc] Implement a p1010rdb clock source.

[Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1483 bytes --]

On 08/08/2011 01:31 PM, Robin Holt wrote:
> On Mon, Aug 08, 2011 at 10:37:58AM +0200, Wolfgang Grandegger wrote:
>> On 08/06/2011 04:34 PM, Robin Holt wrote:
>>> flexcan driver needs the clk_get, clk_get_rate, etc functions
>>> to work.  This patch provides the minimum functionality.
>>
>> This needs some more general thoughts... apart from the question where
>> the code should go.
>>
>> Like for the MSCAN on the MPC5200, the user should be *able* to select
>> an appropriate clock source and divider via DTS node properties.
>> Currently it seems, that the DTS properties must match some
>> pre-configured values, most likely set by the boot loader. Please
>> correct me if I'm wrong. For me this is generic and should go into the
>> Flexcan driver. From there, a platform specific function, e.g.
>> flexcan_set_clock() might be called.
> 
> OK.  Dug a bit more.  The p1010 built-in clocksource seems to be the
> periphereal clock frequency which is system bus frequency divided
> by 2.  The clock source can not be changed, but the clock divider can
> by freezing the interface and setting the CTRL register.  This appears

Which bit(s) in the CTRL register is/are this?

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core