From: Ryan Mallon <rmallon@gmail.com>
To: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
"grant.likely@secretlab.ca" <grant.likely@secretlab.ca>
Subject: Re: gpio: ep93xx: remove unused inline function
Date: Tue, 09 Aug 2011 13:07:09 +1000 [thread overview]
Message-ID: <4E40A45D.4000806@gmail.com> (raw)
In-Reply-To: <ADE657CA350FB648AAC2C43247A983F001F38838920C@AUSP01VMBX24.collaborationhost.net>
On 09/08/11 10:22, H Hartley Sweeten wrote:
> On Monday, August 08, 2011 4:54 PM, Ryan Mallon wrote:
>> Note that we have a lot of line>> 3 and (1<< (line& 7)) scattered
>> through this file. We could do something like this (completely untested):
>>
>> ----
>> gpio-ep93xx: Add helper functions for irq_port and irq_port_mask
>>
>> Signed-off-by: Ryan Mallon<rmallon@gmail.com>
>> ---
>>
>> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
>> index 72fb9c6..3092155 100644
>> --- a/drivers/gpio/gpio-ep93xx.c
>> +++ b/drivers/gpio/gpio-ep93xx.c
>> @@ -45,6 +45,16 @@ static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
>> static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
>> static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
>>
>> +static inline int irq_port_mask(unsigned int irq)
>> +{
>> + return 1<< (irq_to_gpio(irq)& 7);
>> +}
>> +
>> +static inline int irq_port(unsigned int irq)
>> +{
>> + return irq_to_gpio(irq)>> 3;
>> +}
>> +
> Ryan,
>
> If you _do_ want to consolidate the port/mask stuff how about something like
> this instead? This at least gets the irq_to_gpio() call in one place.
>
Either approach should be fine. Since the helper functions are inline
the compiler should be smart enough to realise that it only needs to
call irq_to_gpio once. You don't really need to rename port_mask to mask
either, it just makes the patch more verbose than it needs to be.
If you want to put this through can you please add:
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Thanks,
~Ryan
> Regards,
> Hartley
>
> ---
>
> gpio: ep93xx: Add helper function to convert irq to gpio, port, and mask.
>
> Signed-off-by: H Hartley Sweeten<hsweeten@visionengravers.com>
>
> ---
>
> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
> index 468b27d..59074f6 100644
> --- a/drivers/gpio/gpio-ep93xx.c
> +++ b/drivers/gpio/gpio-ep93xx.c
> @@ -46,6 +46,17 @@ static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
> static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
> static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
>
> +static int ep93xx_gpio_irq_to_gpio_port_mask(unsigned int irq,
> + int *port, int *mask)
> +{
> + int gpio = irq_to_gpio(irq);
> +
> + *port = gpio>> 3;
> + *mask = 1<< (gpio& 7);
> +
> + return gpio;
> +}
> +
> static void ep93xx_gpio_update_int_params(unsigned port)
> {
> BUG_ON(port> 2);
> @@ -69,14 +80,14 @@ static inline void ep93xx_gpio_int_mask(unsigned line)
>
> static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
> {
> - int line = irq_to_gpio(irq);
> - int port = line>> 3;
> - int port_mask = 1<< (line& 7);
> + int port, mask;
> +
> + ep93xx_gpio_irq_to_gpio_port_mask(irq,&port,&mask);
>
> if (enable)
> - gpio_int_debounce[port] |= port_mask;
> + gpio_int_debounce[port] |= mask;
> else
> - gpio_int_debounce[port]&= ~port_mask;
> + gpio_int_debounce[port]&= ~mask;
>
> __raw_writeb(gpio_int_debounce[port],
> EP93XX_GPIO_REG(int_debounce_register_offset[port]));
> @@ -119,48 +130,50 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
>
> static void ep93xx_gpio_irq_ack(struct irq_data *d)
> {
> - int line = irq_to_gpio(d->irq);
> - int port = line>> 3;
> - int port_mask = 1<< (line& 7);
> + int port, mask;
> +
> + ep93xx_gpio_irq_to_gpio_port_mask(d->irq,&port,&mask);
>
> if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
> - gpio_int_type2[port] ^= port_mask; /* switch edge direction */
> + gpio_int_type2[port] ^= mask; /* switch edge direction */
> ep93xx_gpio_update_int_params(port);
> }
>
> - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
> + __raw_writeb(mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
> }
>
> static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
> {
> - int line = irq_to_gpio(d->irq);
> - int port = line>> 3;
> - int port_mask = 1<< (line& 7);
> + int port, mask;
> +
> + ep93xx_gpio_irq_to_gpio_port_mask(d->irq,&port,&mask);
>
> if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
> - gpio_int_type2[port] ^= port_mask; /* switch edge direction */
> + gpio_int_type2[port] ^= mask; /* switch edge direction */
>
> - gpio_int_unmasked[port]&= ~port_mask;
> + gpio_int_unmasked[port]&= ~mask;
> ep93xx_gpio_update_int_params(port);
>
> - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
> + __raw_writeb(mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
> }
>
> static void ep93xx_gpio_irq_mask(struct irq_data *d)
> {
> - int line = irq_to_gpio(d->irq);
> - int port = line>> 3;
> + int port, mask;
> +
> + ep93xx_gpio_irq_to_gpio_port_mask(d->irq,&port,&mask);
>
> - gpio_int_unmasked[port]&= ~(1<< (line& 7));
> + gpio_int_unmasked[port]&= ~mask;
> ep93xx_gpio_update_int_params(port);
> }
>
> static void ep93xx_gpio_irq_unmask(struct irq_data *d)
> {
> - int line = irq_to_gpio(d->irq);
> - int port = line>> 3;
> + int port, mask;
>
> - gpio_int_unmasked[port] |= 1<< (line& 7);
> + ep93xx_gpio_irq_to_gpio_port_mask(d->irq,&port,&mask);
> +
> + gpio_int_unmasked[port] |= mask;
> ep93xx_gpio_update_int_params(port);
> }
>
> @@ -171,41 +184,41 @@ static void ep93xx_gpio_irq_unmask(struct irq_data *d)
> */
> static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
> {
> - const int gpio = irq_to_gpio(d->irq);
> - const int port = gpio>> 3;
> - const int port_mask = 1<< (gpio& 7);
> + int gpio, port, mask;
> irq_flow_handler_t handler;
>
> + gpio = ep93xx_gpio_irq_to_gpio_port_mask(d->irq,&port,&mask);
> +
> gpio_direction_input(gpio);
>
> switch (type) {
> case IRQ_TYPE_EDGE_RISING:
> - gpio_int_type1[port] |= port_mask;
> - gpio_int_type2[port] |= port_mask;
> + gpio_int_type1[port] |= mask;
> + gpio_int_type2[port] |= mask;
> handler = handle_edge_irq;
> break;
> case IRQ_TYPE_EDGE_FALLING:
> - gpio_int_type1[port] |= port_mask;
> - gpio_int_type2[port]&= ~port_mask;
> + gpio_int_type1[port] |= mask;
> + gpio_int_type2[port]&= ~mask;
> handler = handle_edge_irq;
> break;
> case IRQ_TYPE_LEVEL_HIGH:
> - gpio_int_type1[port]&= ~port_mask;
> - gpio_int_type2[port] |= port_mask;
> + gpio_int_type1[port]&= ~mask;
> + gpio_int_type2[port] |= mask;
> handler = handle_level_irq;
> break;
> case IRQ_TYPE_LEVEL_LOW:
> - gpio_int_type1[port]&= ~port_mask;
> - gpio_int_type2[port]&= ~port_mask;
> + gpio_int_type1[port]&= ~mask;
> + gpio_int_type2[port]&= ~mask;
> handler = handle_level_irq;
> break;
> case IRQ_TYPE_EDGE_BOTH:
> - gpio_int_type1[port] |= port_mask;
> + gpio_int_type1[port] |= mask;
> /* set initial polarity based on current input level */
> if (gpio_get_value(gpio))
> - gpio_int_type2[port]&= ~port_mask; /* falling */
> + gpio_int_type2[port]&= ~mask; /* falling */
> else
> - gpio_int_type2[port] |= port_mask; /* rising */
> + gpio_int_type2[port] |= mask; /* rising */
> handler = handle_edge_irq;
> break;
> default:
> @@ -215,7 +228,7 @@ static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
>
> __irq_set_handler_locked(d->irq, handler);
>
> - gpio_int_enabled[port] |= port_mask;
> + gpio_int_enabled[port] |= mask;
>
> ep93xx_gpio_update_int_params(port);
>
prev parent reply other threads:[~2011-08-09 3:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-08 23:18 gpio: ep93xx: remove unused inline function H Hartley Sweeten
2011-08-08 23:53 ` Ryan Mallon
2011-08-08 23:58 ` H Hartley Sweeten
2011-08-09 0:22 ` H Hartley Sweeten
2011-08-09 3:07 ` Ryan Mallon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E40A45D.4000806@gmail.com \
--to=rmallon@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=hartleys@visionengravers.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.