From: Liam Girdwood <lrg@ti.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
"patches@opensource.wolfsonmicro.com"
<patches@opensource.wolfsonmicro.com>
Subject: Re: [PATCH 2/2] ASoC: Add SPI support for WM8741
Date: Tue, 9 Aug 2011 13:28:58 +0100 [thread overview]
Message-ID: <4E41280A.7030800@ti.com> (raw)
In-Reply-To: <1312361229-30722-2-git-send-email-broonie@opensource.wolfsonmicro.com>
On 03/08/11 09:47, Mark Brown wrote:
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
Could not see 1/2
but 2/2
Acked-by: Liam Girdwood <lrg@ti.com>
> sound/soc/codecs/wm8741.c | 48 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 48 insertions(+), 0 deletions(-)
>
> diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
> index d4bfffd..c1b6e91 100644
> --- a/sound/soc/codecs/wm8741.c
> +++ b/sound/soc/codecs/wm8741.c
> @@ -17,6 +17,7 @@
> #include <linux/delay.h>
> #include <linux/pm.h>
> #include <linux/i2c.h>
> +#include <linux/spi/spi.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> @@ -549,6 +550,43 @@ static struct i2c_driver wm8741_i2c_driver = {
> };
> #endif
>
> +#if defined(CONFIG_SPI_MASTER)
> +static int __devinit wm8741_spi_probe(struct spi_device *spi)
> +{
> + struct wm8741_priv *wm8741;
> + int ret;
> +
> + wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL);
> + if (wm8741 == NULL)
> + return -ENOMEM;
> +
> + wm8741->control_type = SND_SOC_SPI;
> + spi_set_drvdata(spi, wm8741);
> +
> + ret = snd_soc_register_codec(&spi->dev,
> + &soc_codec_dev_wm8741, &wm8741_dai, 1);
> + if (ret < 0)
> + kfree(wm8741);
> + return ret;
> +}
> +
> +static int __devexit wm8741_spi_remove(struct spi_device *spi)
> +{
> + snd_soc_unregister_codec(&spi->dev);
> + kfree(spi_get_drvdata(spi));
> + return 0;
> +}
> +
> +static struct spi_driver wm8741_spi_driver = {
> + .driver = {
> + .name = "wm8741",
> + .owner = THIS_MODULE,
> + },
> + .probe = wm8741_spi_probe,
> + .remove = __devexit_p(wm8741_spi_remove),
> +};
> +#endif /* CONFIG_SPI_MASTER */
> +
> static int __init wm8741_modinit(void)
> {
> int ret = 0;
> @@ -558,6 +596,13 @@ static int __init wm8741_modinit(void)
> if (ret != 0)
> pr_err("Failed to register WM8741 I2C driver: %d\n", ret);
> #endif
> +#if defined(CONFIG_SPI_MASTER)
> + ret = spi_register_driver(&wm8741_spi_driver);
> + if (ret != 0) {
> + printk(KERN_ERR "Failed to register wm8741 SPI driver: %d\n",
> + ret);
> + }
> +#endif
>
> return ret;
> }
> @@ -565,6 +610,9 @@ module_init(wm8741_modinit);
>
> static void __exit wm8741_exit(void)
> {
> +#if defined(CONFIG_SPI_MASTER)
> + spi_unregister_driver(&wm8741_spi_driver);
> +#endif
> #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
> i2c_del_driver(&wm8741_i2c_driver);
> #endif
next prev parent reply other threads:[~2011-08-09 12:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-03 8:47 [PATCH 1/2] ASoC: Refactor WM8741 regulator handling into CODEC generic code Mark Brown
2011-08-03 8:47 ` [PATCH 2/2] ASoC: Add SPI support for WM8741 Mark Brown
2011-08-09 12:28 ` Liam Girdwood [this message]
2011-08-09 15:08 ` Mark Brown
2011-08-09 15:29 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E41280A.7030800@ti.com \
--to=lrg@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.