From: Stefan Assmann <sassmann@kpanic.de>
To: linux-wireless@vger.kernel.org
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Subject: Oops in rtl8192ce when unloading the module
Date: Sat, 13 Aug 2011 13:26:49 +0200 [thread overview]
Message-ID: <4E465F79.5060205@kpanic.de> (raw)
01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8176] (rev 01)
This happens with 3.1.0-rc1
modprobe -r rtl8192ce
[ 450.710489] BUG: unable to handle kernel NULL pointer dereference at 0000000000000620
[ 450.710505] IP: [<ffffffffa0224972>] rtl92ce_get_desc+0x53/0x96 [rtl8192ce]
[ 450.710521] PGD 1e4aa6067 PUD 1e4906067 PMD 0
[ 450.710529] Oops: 0000 [#1] SMP
[ 450.710537] CPU 1
[ 450.710540] Modules linked in: zd1211rw fuse ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc cpufreq_ondemand sunrpc powernow_k8 freq_table mperf
ip6t_REJECT nf_conntrack_i
pv6 nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 ip6table_filter xt_state ip6_tables nf_conntrack rfcomm bnep arc4 rtl8192ce(-) rtl8192c_common snd_hda_codec_conexant snd_hda_codec_hdmi rtlwifi
uvcvideo snd_hda_intel snd_
hda_codec snd_hwdep videodev snd_seq btusb bluetooth media v4l2_compat_ioctl32 snd_seq_device microcode snd_pcm pcspkr joydev serio_raw sp5100_tco mac80211 k10temp i2c_piix4 i2c_core thinkpad_acpi
video snd_timer wmi cfg8021
1 snd soundcore atl1c snd_page_alloc rfkill virtio_net kvm_amd kvm btrfs zlib_deflate libcrc32c xts gf128mul dm_crypt [last unloaded: cpufreq_ondemand]
[ 450.710630]
[ 450.710636] Pid: 3949, comm: modprobe Not tainted 3.1.0-rc1.sassmann+ #8 LENOVO 30515QG/30515QG
[ 450.710644] RIP: 0010:[<ffffffffa0224972>] [<ffffffffa0224972>] rtl92ce_get_desc+0x53/0x96 [rtl8192ce]
[ 450.710655] RSP: 0000:ffff8801e490bb78 EFLAGS: 00010046
[ 450.710659] RAX: ffffffffa02266a0 RBX: ffff88020a939d00 RCX: 0000000000000000
[ 450.710664] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000620
[ 450.710668] RBP: ffff8801e490bb88 R08: ffff88021189c200 R09: 0000000000000013
[ 450.710673] R10: 0000000000000000 R11: ffff88020a938540 R12: ffff8801f452eb00
[ 450.710677] R13: ffff88020a939d64 R14: 0000000000000086 R15: ffff88020a938540
[ 450.710683] FS: 00007f2c64ba8720(0000) GS:ffff88021ed00000(0000) knlGS:0000000000000000
[ 450.710688] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 450.710692] CR2: 0000000000000620 CR3: 00000001e7f62000 CR4: 00000000000006e0
[ 450.710697] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 450.710702] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 450.710707] Process modprobe (pid: 3949, threadinfo ffff8801e490a000, task ffff8801e7e94560)
[ 450.710711] Stack:
[ 450.710714] 0000000000000000 ffff88020a939d40 ffff8801e490bca8 ffffffffa0248102
[ 450.710722] ffff8801e490bfd8 0000004000000282 00000031e490bbb8 0000000000000620
[ 450.710730] ffff8801e490bc48 ffff8801e490bc20 0000000000000000 00000000009e0000
[ 450.710737] Call Trace:
[ 450.710754] [<ffffffffa0248102>] _rtl_pci_rx_interrupt+0xcf/0x4bf [rtlwifi]
[ 450.710769] [<ffffffffa0248c16>] _rtl_pci_interrupt+0x724/0x7ce [rtlwifi]
[ 450.710778] [<ffffffff810aefaa>] __free_irq+0x145/0x18f
[ 450.710784] [<ffffffff810af097>] free_irq+0x5b/0x73
[ 450.710797] [<ffffffffa0247c9b>] rtl_pci_disconnect+0x125/0x17a [rtlwifi]
[ 450.710807] [<ffffffff8125f196>] pci_device_remove+0x3d/0x8f
[ 450.710816] [<ffffffff812fc0c7>] __device_release_driver+0x86/0xcf
[ 450.710823] [<ffffffff812fc7a0>] driver_detach+0x82/0xaa
[ 450.710830] [<ffffffff812fbf8c>] bus_remove_driver+0xb7/0xdb
[ 450.710838] [<ffffffff81181198>] ? release_sysfs_dirent+0x92/0xb0
[ 450.710845] [<ffffffff812fce38>] driver_unregister+0x6a/0x72
[ 450.710853] [<ffffffff8125f364>] pci_unregister_driver+0x44/0x89
[ 450.710862] [<ffffffffa0224a20>] cleanup_module+0x10/0x12 [rtl8192ce]
[ 450.710868] [<ffffffff81088ccc>] sys_delete_module+0x1ba/0x22c
[ 450.710875] [<ffffffff810fde39>] ? do_munmap+0x2f2/0x30b
[ 450.710883] [<ffffffff814cb182>] system_call_fastpath+0x16/0x1b
[ 450.710887] Code: c7 c7 98 60 22 a0 48 c7 c2 90 4f 22 a0 31 c0 e8 53 70 29 e1 0f b6 f3 48 c7 c7 a5 60 22 a0 eb 41 84 d2 74 07 80 fa 05 75 12 eb 07 <8b> 07 c1 e8 1f eb 38 8b 07 25 ff 3f 00 00 eb 2f
48 c7 c6 1a 60
[ 450.710942] RIP [<ffffffffa0224972>] rtl92ce_get_desc+0x53/0x96 [rtl8192ce]
[ 450.710950] RSP <ffff8801e490bb78>
[ 450.710954] CR2: 0000000000000620
[ 450.710959] ---[ end trace e7de012f8b8d42f4 ]---
Help is appreciated. :)
Stefan
next reply other threads:[~2011-08-13 11:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-13 11:26 Stefan Assmann [this message]
2011-08-14 6:00 ` Oops in rtl8192ce when unloading the module Ali Bahar
2011-08-14 8:22 ` Stefan Assmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E465F79.5060205@kpanic.de \
--to=sassmann@kpanic.de \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.