From: "Roland Vossen" <rvossen@broadcom.com>
To: Camaleón <noelamac@gmail.com>
Cc: "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
"devel@driverdev.osuosl.org" <devel@driverdev.osuosl.org>,
"Brett Rudley" <brudley@broadcom.com>,
"Henry Ptasinski" <henryp@broadcom.com>,
"Arend Van Spriel" <arend@broadcom.com>,
"Henry Ptasinski" <henryp@broadcom.com>,
networkmanager-list@gnome.org
Subject: Re: brcmsmac driver only works when sitting next to the AP
Date: Tue, 16 Aug 2011 13:36:33 +0200 [thread overview]
Message-ID: <4E4A5641.4020604@broadcom.com> (raw)
In-Reply-To: <20110814121646.GA5188@stt008.linux.site>
Hello Camaleón,
So the first problem that you encounter is that scan does not work. Lets
dive into that first.
I see in the log that you sent:
'Aug 14 13:39:02 stt300 NetworkManager[1181]:
supplicant_interface_acquire: assertion `mgr_state ==
NM_SUPPLICANT_MANAGER_STATE_IDLE' failed'
I also see many 'wpa_supplicant[1204]: Failed to initiate AP scan' messages.
There are no 'Failed to initiate AP scan' messages before the 'assertion
failed' message. I do not know if the 2nd message is a byproduct of the
1st result. Regardless, a failed assertion is serious. I cc'ed the
network manager mailing list.
I don't know how willing/able you are to do some kernel hacking, but
could you provide us more information with the following instructions:
http://linuxwireless.org/en/developers/Documentation/mac80211/tracing
Thanks, Roland.
wrote:
> Hello,
>
> Some background:
>
> ***
> Computer: Compaq Mini CQ10
> Running Debian Wheezy, kernel 3.0.0.1-686-pae
> Debian Bug report #637240
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637240
> ***
>
> Since upgrading to kernel 3.x, I'm facing a weird problem with my
> wireless adapter (BCM4313) and "brcmsmac" driver. The problems are as
> follows:
>
> 1/ When the computer starts there is no automatic association between
> the AP and the netbook. NetworkManager stays disconnected and shows not
> wifi networks available.
>
> 2/ Once I force a connection to a hidden AP, I can only get associated
> when sitting next (very near) to the AP.
>
> I am attaching the logs for both situations:
>
> a) When sitting next to the AP and computer starts (next_to_ap.txt)
> b) When sitting on the next room (next_room.txt)
>
> Kernel 2.6.39-2-686-pae was working fine.
>
> CC'ing to "devel@driverdev.osuosl.org" mailing list and Broadcom
> maintainers.
>
> P.S. You can add me as CC for any response.
>
> Greetings,
>
Aug 14 13:38:15 stt300 NetworkManager[1109]: <info> (wlan0): device
state change: 8 -> 3 (reason 38)
Aug 14 13:38:15 stt300 NetworkManager[1109]: <info> (wlan0):
deactivating device (reason: 38).
Aug 14 13:38:15 stt300 NetworkManager[1109]: <info> (wlan0): canceled
DHCP transaction, DHCP client pid 2217
Aug 14 13:38:15 stt300 avahi-daemon[1155]: Withdrawing address record
for 192.168.0.155 on wlan0.
Aug 14 13:38:15 stt300 avahi-daemon[1155]: Leaving mDNS multicast group
on interface wlan0.IPv4 with address 192.168.0.155.
Aug 14 13:38:15 stt300 avahi-daemon[1155]: Interface wlan0.IPv4 no
longer relevant for mDNS.
Aug 14 13:38:15 stt300 kernel: [ 4281.489369] ieee80211 phy0:
wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Aug 14 13:38:15 stt300 kernel: [ 4281.501937] ieee80211 phy0:
wl_ops_bss_info_changed: qos enabled: false (implement)
Aug 14 13:38:15 stt300 kernel: [ 4281.502139] ieee80211 phy0: brcmsmac:
wl_ops_bss_info_changed: disassociated
Aug 14 13:38:15 stt300 kernel: [ 4281.502327] ieee80211 phy0:
wl_ops_bss_info_changed: arp filtering: enabled false, count 0 (implement)
Aug 14 13:38:15 stt300 kernel: [ 4281.502560] wlan0: deauthenticating
from 00:23:f8:9d:ad:11 by local choice (reason=3)
Aug 14 13:38:15 stt300 dbus[1093]: [system] Activating service
name='org.freedesktop.nm_dispatcher' (using servicehelper)
Aug 14 13:38:15 stt300 acpid: client 1153[0:0] has disconnected
Aug 14 13:38:15 stt300 acpid: client connected from 2430[0:0]
Aug 14 13:38:15 stt300 acpid: 1 client rule loaded
Aug 14 13:38:15 stt300 dbus[1093]: [system] Successfully activated
service 'org.freedesktop.nm_dispatcher'
Aug 14 13:38:15 stt300 kernel: [ 4281.560117] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: true (implement)
Aug 14 13:38:15 stt300 kernel: [ 4281.563769] cfg80211: Calling CRDA to
update world regulatory domain
Aug 14 13:38:15 stt300 wpa_supplicant[1132]: CTRL-EVENT-DISCONNECTED
bssid=00:00:00:00:00:00 reason=0
Aug 14 13:38:15 stt300 kernel: [ 4281.582186] cfg80211: World regulatory
domain updated:
Aug 14 13:38:15 stt300 kernel: [ 4281.582194] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:38:15 stt300 kernel: [ 4281.582202] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.582208] cfg80211: (2457000 KHz
- 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.582214] cfg80211: (2474000 KHz
- 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.582221] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.582227] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.582257] cfg80211: Calling CRDA for
country: EU
Aug 14 13:38:15 stt300 kernel: [ 4281.594818] cfg80211: Regulatory
domain changed to country: EU
Aug 14 13:38:15 stt300 kernel: [ 4281.594826] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:38:15 stt300 kernel: [ 4281.594833] cfg80211: (2402000 KHz
- 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.594839] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.594845] cfg80211: (5250000 KHz
- 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:38:15 stt300 kernel: [ 4281.594851] cfg80211: (5490000 KHz
- 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Aug 14 13:38:15 stt300 init: Switching to runlevel: 0
Aug 14 13:38:16 stt300 bluetoothd[1167]: Stopping SDP server
Aug 14 13:38:16 stt300 bluetoothd[1167]: Exit
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> caught signal 15,
shutting down normally.
Aug 14 13:38:17 stt300 NetworkManager[1109]: <warn> quit request
received, terminating...
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): now unmanaged
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): device state
change: 2 -> 1 (reason 36)
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): cleaning up...
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (eth0): taking down
device.
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): now unmanaged
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): device
state change: 3 -> 1 (reason 36)
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): cleaning up...
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> (wlan0): taking down
device.
Aug 14 13:38:17 stt300 avahi-daemon[1155]: Got SIGTERM, quitting.
Aug 14 13:38:17 stt300 avahi-daemon[1155]: Leaving mDNS multicast group
on interface wlan0.IPv6 with address fe80::ae81:12ff:fe34:6963.
Aug 14 13:38:17 stt300 NetworkManager[1109]: <info> exiting (success)
Aug 14 13:38:17 stt300 avahi-daemon[1155]: avahi-daemon 0.6.30 exiting.
Aug 14 13:38:18 stt300 nm-dispatcher.action: Caught signal 15, shutting
down...
Aug 14 13:38:18 stt300 acpid: exiting
Aug 14 13:38:18 stt300 modem-manager[1118]: <info> Caught signal 15,
shutting down...
Aug 14 13:38:19 stt300 kernel: Kernel logging (proc) stopped.
Aug 14 13:38:19 stt300 rsyslogd: [origin software="rsyslogd"
swVersion="5.8.3" x-pid="1023" x-info="http://www.rsyslog.com"] exiting
on signal 15.
Aug 14 13:39:00 stt300 kernel: imklog 5.8.3, log source = /proc/kmsg
started.
Aug 14 13:39:00 stt300 rsyslogd: [origin software="rsyslogd"
swVersion="5.8.3" x-pid="1136" x-info="http://www.rsyslog.com"] start
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing cgroup subsys
cpuset
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing cgroup subsys cpu
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Linux version
3.0.0-1-686-pae (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version
4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Disabled fast string
operations
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-provided physical RAM
map:
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
0000000000000000 - 000000000009fc00 (usable)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
000000000009fc00 - 00000000000a0000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000000e0000 - 0000000000100000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
0000000000100000 - 000000007f43f000 (usable)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
000000007f43f000 - 000000007f4bf000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
000000007f4bf000 - 000000007f5bf000 (ACPI NVS)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
000000007f5bf000 - 000000007f5f7000 (ACPI data)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
000000007f5f7000 - 000000007f600000 (usable)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
000000007f600000 - 0000000080000000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000e0000000 - 00000000f0000000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000fec00000 - 00000000fec01000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000fed14000 - 00000000fed1a000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000fed1c000 - 00000000fed20000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000fee00000 - 00000000fee01000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] BIOS-e820:
00000000ffe00000 - 0000000100000000 (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] NX (Execute Disable)
protection: active
Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMI 2.6 present.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMI: Hewlett-Packard
Compaq Mini CQ10-500 /148A, BIOS F.14 11/12/2010
Aug 14 13:39:00 stt300 kernel: [ 0.000000] e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] e820 remove range:
00000000000a0000 - 0000000000100000 (usable)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] last_pfn = 0x7f600
max_arch_pfn = 0x1000000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] MTRR default type: uncachable
Aug 14 13:39:00 stt300 kernel: [ 0.000000] MTRR fixed ranges enabled:
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 00000-9FFFF write-back
Aug 14 13:39:00 stt300 kernel: [ 0.000000] A0000-BFFFF uncachable
Aug 14 13:39:00 stt300 kernel: [ 0.000000] C0000-FFFFF write-protect
Aug 14 13:39:00 stt300 kernel: [ 0.000000] MTRR variable ranges enabled:
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0 base 0FFE00000 mask
0FFE00000 write-protect
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 1 base 000000000 mask
0C0000000 write-back
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 2 base 040000000 mask
0C0000000 write-back
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 3 base 07F800000 mask
0FF800000 uncachable
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 4 disabled
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 5 disabled
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 6 disabled
Aug 14 13:39:00 stt300 kernel: [ 0.000000] x86 PAT enabled: cpu 0,
old 0x7040600070406, new 0x7010600070106
Aug 14 13:39:00 stt300 kernel: [ 0.000000] initial memory mapped : 0
- 01a00000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Base memory trampoline at
[c009b000] 9b000 size 16384
Aug 14 13:39:00 stt300 kernel: [ 0.000000] init_memory_mapping:
0000000000000000-00000000379fe000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0000000000 - 0000200000
page 4k
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0000200000 - 0037800000
page 2M
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0037800000 - 00379fe000
page 4k
Aug 14 13:39:00 stt300 kernel: [ 0.000000] kernel direct mapping
tables up to 379fe000 @ 19fa000-1a00000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] RAMDISK: 37b6a000 - 37dad000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Allocated new RAMDISK:
377bb000 - 379fd217
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Move RAMDISK from
0000000037b6a000 - 0000000037dac216 to 377bb000 - 379fd216
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: RSDP 000fe020 00024
(v02 HP )
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: XSDT 7f5f6120 00074
(v01 HPQOEM SLIC-MPC 00000001 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: FACP 7f5f5000 000F4
(v04 HP SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: DSDT 7f5e6000 0BA96
(v01 HP SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: FACS 7f589000 00040
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: HPET 7f5f4000 00038
(v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: APIC 7f5f3000 00078
(v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: MCFG 7f5f2000 0003C
(v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SLIC 7f5e5000 00176
(v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: BOOT 7f5e4000 00028
(v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e3000 004C4
(v02 PmRef CpuPm 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e2000 001F7
(v02 PmRef Cpu0Tst 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: SSDT 7f5e1000 00064
(v02 PmRef Cpu1Tst 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: WDAT 7f5e0000 00194
(v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: Local APIC address
0xfee00000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 1148MB HIGHMEM available.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 889MB LOWMEM available.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] mapped low ram: 0 - 379fe000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] low ram: 0 - 379fe000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Zone PFN ranges:
Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA 0x00000010 ->
0x00001000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Normal 0x00001000 ->
0x000379fe
Aug 14 13:39:00 stt300 kernel: [ 0.000000] HighMem 0x000379fe ->
0x0007f600
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Movable zone start PFN for
each node
Aug 14 13:39:00 stt300 kernel: [ 0.000000] early_node_map[3] active
PFN ranges
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0: 0x00000010 ->
0x0000009f
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0: 0x00000100 ->
0x0007f43f
Aug 14 13:39:00 stt300 kernel: [ 0.000000] 0: 0x0007f5f7 ->
0x0007f600
Aug 14 13:39:00 stt300 kernel: [ 0.000000] On node 0 totalpages: 521175
Aug 14 13:39:00 stt300 kernel: [ 0.000000] free_area_init_node: node
0, pgdat c141c980, node_mem_map f67ca200
Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA zone: 32 pages used
for memmap
Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA zone: 0 pages reserved
Aug 14 13:39:00 stt300 kernel: [ 0.000000] DMA zone: 3951 pages,
LIFO batch:0
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Normal zone: 1748 pages
used for memmap
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Normal zone: 221994
pages, LIFO batch:31
Aug 14 13:39:00 stt300 kernel: [ 0.000000] HighMem zone: 2297 pages
used for memmap
Aug 14 13:39:00 stt300 kernel: [ 0.000000] HighMem zone: 291153
pages, LIFO batch:31
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Using APIC driver default
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: Local APIC address
0xfee00000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01]
lapic_id[0x00] enabled)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02]
lapic_id[0x01] enabled)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03]
lapic_id[0x00] disabled)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04]
lapic_id[0x00] disabled)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x01] dfl dfl lint[0x1])
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: LAPIC_NMI
(acpi_id[0x02] dfl dfl lint[0x1])
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04]
address[0xfec00000] gsi_base[0])
Aug 14 13:39:00 stt300 kernel: [ 0.000000] IOAPIC[0]: apic_id 4,
version 32, address 0xfec00000, GSI 0-23
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 high level)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IRQ0 used by override.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IRQ2 used by override.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Using ACPI (MADT) for SMP
configuration information
Aug 14 13:39:00 stt300 kernel: [ 0.000000] ACPI: HPET id: 0x8086a201
base: 0xfed00000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2
hotplug CPUs
Aug 14 13:39:00 stt300 kernel: [ 0.000000] nr_irqs_gsi: 40
Aug 14 13:39:00 stt300 kernel: [ 0.000000] PM: Registered nosave
memory: 000000000009f000 - 00000000000a0000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e0000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] PM: Registered nosave
memory: 00000000000e0000 - 0000000000100000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Allocating PCI resources
starting at 80000000 (gap: 80000000:60000000)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Booting paravirtualized
kernel on bare hardware
Aug 14 13:39:00 stt300 kernel: [ 0.000000] setup_percpu: NR_CPUS:32
nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
Aug 14 13:39:00 stt300 kernel: [ 0.000000] PERCPU: Embedded 13
pages/cpu @f6400000 s28864 r0 d24384 u524288
Aug 14 13:39:00 stt300 kernel: [ 0.000000] pcpu-alloc: s28864 r0
d24384 u524288 alloc=1*2097152
Aug 14 13:39:00 stt300 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Built 1 zonelists in Zone
order, mobility grouping on. Total pages: 517098
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae
root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet
Aug 14 13:39:00 stt300 kernel: [ 0.000000] PID hash table entries:
4096 (order: 2, 16384 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Dentry cache hash table
entries: 131072 (order: 7, 524288 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Inode-cache hash table
entries: 65536 (order: 6, 262144 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing CPU#0
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Initializing HighMem for
node 0 (000379fe:0007f600)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Memory: 2059732k/2086912k
available (2764k kernel code, 24968k reserved, 1474k data, 404k init,
1173800k highmem)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] virtual kernel memory layout:
Aug 14 13:39:00 stt300 kernel: [ 0.000000] fixmap : 0xffd36000 -
0xfffff000 (2852 kB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] pkmap : 0xffa00000 -
0xffc00000 (2048 kB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] vmalloc : 0xf81fe000 -
0xff9fe000 ( 120 MB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] lowmem : 0xc0000000 -
0xf79fe000 ( 889 MB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] .init : 0xc1424000 -
0xc1489000 ( 404 kB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] .data : 0xc12b326c -
0xc1423b80 (1474 kB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] .text : 0xc1000000 -
0xc12b326c (2764 kB)
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Checking if this processor
honours the WP bit even in supervisor mode...Ok.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Hierarchical RCU
implementation.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] RCU dyntick-idle
grace-period acceleration is enabled.
Aug 14 13:39:00 stt300 kernel: [ 0.000000] NR_IRQS:1280
Aug 14 13:39:00 stt300 kernel: [ 0.000000] CPU 0 irqstacks,
hard=f600c000 soft=f600e000
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Console: colour VGA+ 80x25
Aug 14 13:39:00 stt300 kernel: [ 0.000000] console [tty0] enabled
Aug 14 13:39:00 stt300 kernel: [ 0.000000] hpet clockevent registered
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Fast TSC calibration using PIT
Aug 14 13:39:00 stt300 kernel: [ 0.000000] Detected 1662.521 MHz
processor.
Aug 14 13:39:00 stt300 kernel: [ 0.004005] Calibrating delay loop
(skipped), value calculated using timer frequency.. 3325.04 BogoMIPS
(lpj=6650084)
Aug 14 13:39:00 stt300 kernel: [ 0.004015] pid_max: default: 32768
minimum: 301
Aug 14 13:39:00 stt300 kernel: [ 0.004124] Security Framework initialized
Aug 14 13:39:00 stt300 kernel: [ 0.004132] SELinux: Disabled at boot.
Aug 14 13:39:00 stt300 kernel: [ 0.004183] Mount-cache hash table
entries: 512
Aug 14 13:39:00 stt300 kernel: [ 0.004712] Initializing cgroup subsys
cpuacct
Aug 14 13:39:00 stt300 kernel: [ 0.004761] Initializing cgroup subsys
memory
Aug 14 13:39:00 stt300 kernel: [ 0.004792] Initializing cgroup subsys
devices
Aug 14 13:39:00 stt300 kernel: [ 0.004798] Initializing cgroup subsys
freezer
Aug 14 13:39:00 stt300 kernel: [ 0.004803] Initializing cgroup subsys
net_cls
Aug 14 13:39:00 stt300 kernel: [ 0.004808] Initializing cgroup subsys
blkio
Aug 14 13:39:00 stt300 kernel: [ 0.004869] Disabled fast string
operations
Aug 14 13:39:00 stt300 kernel: [ 0.004878] CPU: Physical Processor ID: 0
Aug 14 13:39:00 stt300 kernel: [ 0.004882] CPU: Processor Core ID: 0
Aug 14 13:39:00 stt300 kernel: [ 0.004887] mce: CPU supports 5 MCE banks
Aug 14 13:39:00 stt300 kernel: [ 0.004898] CPU0: Thermal monitoring
handled by SMI
Aug 14 13:39:00 stt300 kernel: [ 0.004906] using mwait in idle threads.
Aug 14 13:39:00 stt300 kernel: [ 0.005422] ACPI: Core revision 20110413
Aug 14 13:39:00 stt300 kernel: [ 0.020112] Enabling APIC mode: Flat.
Using 1 I/O APICs
Aug 14 13:39:00 stt300 kernel: [ 0.020524] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 14 13:39:00 stt300 kernel: [ 0.060356] CPU0: Intel(R) Atom(TM)
CPU N455 @ 1.66GHz stepping 0a
Aug 14 13:39:00 stt300 kernel: [ 0.064003] Performance Events: PEBS
fmt0+, Atom events, Intel PMU driver.
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... version: 3
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... bit width: 40
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... generic registers: 2
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... value mask:
000000ffffffffff
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... max period:
000000007fffffff
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... fixed-purpose events: 3
Aug 14 13:39:00 stt300 kernel: [ 0.064003] ... event mask:
0000000700000003
Aug 14 13:39:00 stt300 kernel: [ 0.064003] NMI watchdog enabled,
takes one hw-pmu counter.
Aug 14 13:39:00 stt300 kernel: [ 0.064003] CPU 1 irqstacks,
hard=f60f4000 soft=f60f6000
Aug 14 13:39:00 stt300 kernel: [ 0.064003] Booting Node 0,
Processors #1
Aug 14 13:39:00 stt300 kernel: [ 0.064003] smpboot cpu 1: start_ip =
9b000
Aug 14 13:39:00 stt300 kernel: [ 0.008000] Initializing CPU#1
Aug 14 13:39:00 stt300 kernel: [ 0.008000] Disabled fast string
operations
Aug 14 13:39:00 stt300 kernel: [ 0.008000] CPU1: Thermal monitoring
handled by SMI
Aug 14 13:39:00 stt300 kernel: [ 0.156062] NMI watchdog enabled,
takes one hw-pmu counter.
Aug 14 13:39:00 stt300 kernel: [ 0.156137] Brought up 2 CPUs
Aug 14 13:39:00 stt300 kernel: [ 0.156145] Total of 2 processors
activated (6650.35 BogoMIPS).
Aug 14 13:39:00 stt300 kernel: [ 0.156871] devtmpfs: initialized
Aug 14 13:39:00 stt300 kernel: [ 0.156871] PM: Registering ACPI NVS
region at 7f4bf000 (1048576 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.156871] print_constraints: dummy:
Aug 14 13:39:00 stt300 kernel: [ 0.156871] NET: Registered protocol
family 16
Aug 14 13:39:00 stt300 kernel: [ 0.156922] ACPI: bus type pci registered
Aug 14 13:39:00 stt300 kernel: [ 0.157192] PCI: MMCONFIG for domain
0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Aug 14 13:39:00 stt300 kernel: [ 0.157200] PCI: MMCONFIG at [mem
0xe0000000-0xefffffff] reserved in E820
Aug 14 13:39:00 stt300 kernel: [ 0.157205] PCI: Using MMCONFIG for
extended config space
Aug 14 13:39:00 stt300 kernel: [ 0.157209] PCI: Using configuration
type 1 for base access
Aug 14 13:39:00 stt300 kernel: [ 0.160124] bio: create slab <bio-0> at 0
Aug 14 13:39:00 stt300 kernel: [ 0.163201] ACPI: EC: Look up EC in DSDT
Aug 14 13:39:00 stt300 kernel: [ 0.166766] ACPI: Executed 1 blocks of
module-level executable AML code
Aug 14 13:39:00 stt300 kernel: [ 0.171137] [Firmware Bug]: ACPI: BIOS
_OSI(Linux) query ignored
Aug 14 13:39:00 stt300 kernel: [ 0.172142] ACPI: SSDT 7f494c98 001F7
(v02 PmRef Cpu0Ist 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.172944] ACPI: Dynamic OEM Table Load:
Aug 14 13:39:00 stt300 kernel: [ 0.172952] ACPI: SSDT (null) 001F7
(v02 PmRef Cpu0Ist 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.173258] ACPI: SSDT 7f493e18 001C7
(v02 PmRef Cpu0Cst 00003001 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.174011] ACPI: Dynamic OEM Table Load:
Aug 14 13:39:00 stt300 kernel: [ 0.174018] ACPI: SSDT (null) 001C7
(v02 PmRef Cpu0Cst 00003001 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.196656] ACPI: SSDT 7f494f18 000D0
(v02 PmRef Cpu1Ist 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.197434] ACPI: Dynamic OEM Table Load:
Aug 14 13:39:00 stt300 kernel: [ 0.197442] ACPI: SSDT (null) 000D0
(v02 PmRef Cpu1Ist 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.197718] ACPI: SSDT 7f492f18 00083
(v02 PmRef Cpu1Cst 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.198473] ACPI: Dynamic OEM Table Load:
Aug 14 13:39:00 stt300 kernel: [ 0.198479] ACPI: SSDT (null) 00083
(v02 PmRef Cpu1Cst 00003000 INTL 20051117)
Aug 14 13:39:00 stt300 kernel: [ 0.524473] ACPI: Interpreter enabled
Aug 14 13:39:00 stt300 kernel: [ 0.524485] ACPI: (supports S0 S3 S4 S5)
Aug 14 13:39:00 stt300 kernel: [ 0.524549] ACPI: Using IOAPIC for
interrupt routing
Aug 14 13:39:00 stt300 kernel: [ 0.538349] ACPI: Power Resource
[FN00] (on)
Aug 14 13:39:00 stt300 kernel: [ 0.539118] ACPI: EC: GPE = 0x11, I/O:
command/status = 0x66, data = 0x62
Aug 14 13:39:00 stt300 kernel: [ 0.539485] ACPI: No dock devices found.
Aug 14 13:39:00 stt300 kernel: [ 0.539491] HEST: Table not found.
Aug 14 13:39:00 stt300 kernel: [ 0.539499] PCI: Using host bridge
windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 14 13:39:00 stt300 kernel: [ 0.540516] ACPI Warning: For
\_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI
requires 4 (20110413/nspredef-352)
Aug 14 13:39:00 stt300 kernel: [ 0.540535] \_SB_.PCI0:_OSC evaluation
returned wrong type
Aug 14 13:39:00 stt300 kernel: [ 0.540539] _OSC request data:1 8 1f
Aug 14 13:39:00 stt300 kernel: [ 0.540550] ACPI: PCI Root Bridge
[PCI0] (domain 0000 [bus 00-ff])
Aug 14 13:39:00 stt300 kernel: [ 0.542233] pci_root PNP0A08:00: host
bridge window [io 0x0000-0x0cf7]
Aug 14 13:39:00 stt300 kernel: [ 0.542241] pci_root PNP0A08:00: host
bridge window [io 0x0d00-0xffff]
Aug 14 13:39:00 stt300 kernel: [ 0.542248] pci_root PNP0A08:00: host
bridge window [mem 0x000a0000-0x000bffff]
Aug 14 13:39:00 stt300 kernel: [ 0.542256] pci_root PNP0A08:00: host
bridge window [mem 0x80000000-0xfebfffff]
Aug 14 13:39:00 stt300 kernel: [ 0.542284] pci 0000:00:00.0:
[8086:a010] type 0 class 0x000600
Aug 14 13:39:00 stt300 kernel: [ 0.542346] pci 0000:00:02.0:
[8086:a011] type 0 class 0x000300
Aug 14 13:39:00 stt300 kernel: [ 0.542362] pci 0000:00:02.0: reg 10:
[mem 0x94180000-0x941fffff]
Aug 14 13:39:00 stt300 kernel: [ 0.542372] pci 0000:00:02.0: reg 14:
[io 0x30c0-0x30c7]
Aug 14 13:39:00 stt300 kernel: [ 0.542383] pci 0000:00:02.0: reg 18:
[mem 0x80000000-0x8fffffff pref]
Aug 14 13:39:00 stt300 kernel: [ 0.542393] pci 0000:00:02.0: reg 1c:
[mem 0x94000000-0x940fffff]
Aug 14 13:39:00 stt300 kernel: [ 0.542439] pci 0000:00:02.1:
[8086:a012] type 0 class 0x000380
Aug 14 13:39:00 stt300 kernel: [ 0.542453] pci 0000:00:02.1: reg 10:
[mem 0x94100000-0x9417ffff]
Aug 14 13:39:00 stt300 kernel: [ 0.542566] pci 0000:00:1b.0:
[8086:27d8] type 0 class 0x000403
Aug 14 13:39:00 stt300 kernel: [ 0.542595] pci 0000:00:1b.0: reg 10:
[mem 0x94200000-0x94203fff 64bit]
Aug 14 13:39:00 stt300 kernel: [ 0.542682] pci 0000:00:1b.0: PME#
supported from D0 D3hot D3cold
Aug 14 13:39:00 stt300 kernel: [ 0.542691] pci 0000:00:1b.0: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.542729] pci 0000:00:1c.0:
[8086:27d0] type 1 class 0x000604
Aug 14 13:39:00 stt300 kernel: [ 0.542823] pci 0000:00:1c.0: PME#
supported from D0 D3hot D3cold
Aug 14 13:39:00 stt300 kernel: [ 0.542831] pci 0000:00:1c.0: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.542874] pci 0000:00:1c.1:
[8086:27d2] type 1 class 0x000604
Aug 14 13:39:00 stt300 kernel: [ 0.542966] pci 0000:00:1c.1: PME#
supported from D0 D3hot D3cold
Aug 14 13:39:00 stt300 kernel: [ 0.542974] pci 0000:00:1c.1: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.543018] pci 0000:00:1d.0:
[8086:27c8] type 0 class 0x000c03
Aug 14 13:39:00 stt300 kernel: [ 0.543080] pci 0000:00:1d.0: reg 20:
[io 0x3080-0x309f]
Aug 14 13:39:00 stt300 kernel: [ 0.543134] pci 0000:00:1d.1:
[8086:27c9] type 0 class 0x000c03
Aug 14 13:39:00 stt300 kernel: [ 0.543196] pci 0000:00:1d.1: reg 20:
[io 0x3060-0x307f]
Aug 14 13:39:00 stt300 kernel: [ 0.543247] pci 0000:00:1d.2:
[8086:27ca] type 0 class 0x000c03
Aug 14 13:39:00 stt300 kernel: [ 0.543309] pci 0000:00:1d.2: reg 20:
[io 0x3040-0x305f]
Aug 14 13:39:00 stt300 kernel: [ 0.543362] pci 0000:00:1d.3:
[8086:27cb] type 0 class 0x000c03
Aug 14 13:39:00 stt300 kernel: [ 0.543425] pci 0000:00:1d.3: reg 20:
[io 0x3020-0x303f]
Aug 14 13:39:00 stt300 kernel: [ 0.543490] pci 0000:00:1d.7:
[8086:27cc] type 0 class 0x000c03
Aug 14 13:39:00 stt300 kernel: [ 0.543490] pci 0000:00:1d.7: reg 10:
[mem 0x94204400-0x942047ff]
Aug 14 13:39:00 stt300 kernel: [ 0.548076] pci 0000:00:1d.7: PME#
supported from D0 D3hot D3cold
Aug 14 13:39:00 stt300 kernel: [ 0.548086] pci 0000:00:1d.7: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.548127] pci 0000:00:1e.0:
[8086:2448] type 1 class 0x000604
Aug 14 13:39:00 stt300 kernel: [ 0.548220] pci 0000:00:1f.0:
[8086:27bc] type 0 class 0x000601
Aug 14 13:39:00 stt300 kernel: [ 0.548388] pci 0000:00:1f.2:
[8086:27c1] type 0 class 0x000106
Aug 14 13:39:00 stt300 kernel: [ 0.548417] pci 0000:00:1f.2: reg 10:
[io 0x30b8-0x30bf]
Aug 14 13:39:00 stt300 kernel: [ 0.548434] pci 0000:00:1f.2: reg 14:
[io 0x30cc-0x30cf]
Aug 14 13:39:00 stt300 kernel: [ 0.548450] pci 0000:00:1f.2: reg 18:
[io 0x30b0-0x30b7]
Aug 14 13:39:00 stt300 kernel: [ 0.548466] pci 0000:00:1f.2: reg 1c:
[io 0x30c8-0x30cb]
Aug 14 13:39:00 stt300 kernel: [ 0.548481] pci 0000:00:1f.2: reg 20:
[io 0x30a0-0x30af]
Aug 14 13:39:00 stt300 kernel: [ 0.548497] pci 0000:00:1f.2: reg 24:
[mem 0x94204000-0x942043ff]
Aug 14 13:39:00 stt300 kernel: [ 0.548539] pci 0000:00:1f.2: PME#
supported from D3hot
Aug 14 13:39:00 stt300 kernel: [ 0.548547] pci 0000:00:1f.2: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.548575] pci 0000:00:1f.3:
[8086:27da] type 0 class 0x000c05
Aug 14 13:39:00 stt300 kernel: [ 0.548651] pci 0000:00:1f.3: reg 20:
[io 0x3000-0x301f]
Aug 14 13:39:00 stt300 kernel: [ 0.548840] pci 0000:01:00.0:
[10ec:8136] type 0 class 0x000200
Aug 14 13:39:00 stt300 kernel: [ 0.548910] pci 0000:01:00.0: reg 10:
[io 0x2000-0x20ff]
Aug 14 13:39:00 stt300 kernel: [ 0.549028] pci 0000:01:00.0: reg 18:
[mem 0x90004000-0x90004fff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.549103] pci 0000:01:00.0: reg 20:
[mem 0x90000000-0x90003fff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.549299] pci 0000:01:00.0: supports
D1 D2
Aug 14 13:39:00 stt300 kernel: [ 0.549304] pci 0000:01:00.0: PME#
supported from D0 D1 D2 D3hot D3cold
Aug 14 13:39:00 stt300 kernel: [ 0.549322] pci 0000:01:00.0: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.549489] pci 0000:01:00.1:
[10ec:5288] type 0 class 0x00ff00
Aug 14 13:39:00 stt300 kernel: [ 0.549557] pci 0000:01:00.1: reg 10:
[mem 0x93000000-0x9300ffff]
Aug 14 13:39:00 stt300 kernel: [ 0.549973] pci 0000:01:00.1: supports
D1 D2
Aug 14 13:39:00 stt300 kernel: [ 0.549978] pci 0000:01:00.1: PME#
supported from D1 D2 D3hot D3cold
Aug 14 13:39:00 stt300 kernel: [ 0.549996] pci 0000:01:00.1: PME#
disabled
Aug 14 13:39:00 stt300 kernel: [ 0.550216] pci 0000:00:1c.0: PCI
bridge to [bus 01-01]
Aug 14 13:39:00 stt300 kernel: [ 0.550224] pci 0000:00:1c.0: bridge
window [io 0x2000-0x2fff]
Aug 14 13:39:00 stt300 kernel: [ 0.550233] pci 0000:00:1c.0: bridge
window [mem 0x93000000-0x93ffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.550246] pci 0000:00:1c.0: bridge
window [mem 0x90000000-0x90ffffff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.550356] pci 0000:02:00.0:
[14e4:4727] type 0 class 0x000280
Aug 14 13:39:00 stt300 kernel: [ 0.550405] pci 0000:02:00.0: reg 10:
[mem 0x92000000-0x92003fff 64bit]
Aug 14 13:39:00 stt300 kernel: [ 0.550588] pci 0000:02:00.0: supports
D1 D2
Aug 14 13:39:00 stt300 kernel: [ 0.556069] pci 0000:00:1c.1: PCI
bridge to [bus 02-02]
Aug 14 13:39:00 stt300 kernel: [ 0.556079] pci 0000:00:1c.1: bridge
window [io 0x1000-0x1fff]
Aug 14 13:39:00 stt300 kernel: [ 0.556088] pci 0000:00:1c.1: bridge
window [mem 0x92000000-0x92ffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.556100] pci 0000:00:1c.1: bridge
window [mem 0x91000000-0x91ffffff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.556199] pci 0000:00:1e.0: PCI
bridge to [bus 03-03] (subtractive decode)
Aug 14 13:39:00 stt300 kernel: [ 0.556208] pci 0000:00:1e.0: bridge
window [io 0xf000-0x0000] (disabled)
Aug 14 13:39:00 stt300 kernel: [ 0.556217] pci 0000:00:1e.0: bridge
window [mem 0xfff00000-0x000fffff] (disabled)
Aug 14 13:39:00 stt300 kernel: [ 0.556228] pci 0000:00:1e.0: bridge
window [mem 0xfff00000-0x000fffff pref] (disabled)
Aug 14 13:39:00 stt300 kernel: [ 0.556235] pci 0000:00:1e.0: bridge
window [io 0x0000-0x0cf7] (subtractive decode)
Aug 14 13:39:00 stt300 kernel: [ 0.556242] pci 0000:00:1e.0: bridge
window [io 0x0d00-0xffff] (subtractive decode)
Aug 14 13:39:00 stt300 kernel: [ 0.556249] pci 0000:00:1e.0: bridge
window [mem 0x000a0000-0x000bffff] (subtractive decode)
Aug 14 13:39:00 stt300 kernel: [ 0.556256] pci 0000:00:1e.0: bridge
window [mem 0x80000000-0xfebfffff] (subtractive decode)
Aug 14 13:39:00 stt300 kernel: [ 0.556282] pci_bus 0000:00: on NUMA
node 0
Aug 14 13:39:00 stt300 kernel: [ 0.556291] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0._PRT]
Aug 14 13:39:00 stt300 kernel: [ 0.556615] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.P32_._PRT]
Aug 14 13:39:00 stt300 kernel: [ 0.556823] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.EXP1._PRT]
Aug 14 13:39:00 stt300 kernel: [ 0.556973] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.EXP2._PRT]
Aug 14 13:39:00 stt300 kernel: [ 0.557313] ACPI Warning: For
\_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI
requires 4 (20110413/nspredef-352)
Aug 14 13:39:00 stt300 kernel: [ 0.557331] \_SB_.PCI0:_OSC evaluation
returned wrong type
Aug 14 13:39:00 stt300 kernel: [ 0.557335] _OSC request data:1 1f 1f
Aug 14 13:39:00 stt300 kernel: [ 0.557346] pci0000:00: Requesting
ACPI _OSC control (0x1d)
Aug 14 13:39:00 stt300 kernel: [ 0.557493] ACPI Warning: For
\_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI
requires 4 (20110413/nspredef-352)
Aug 14 13:39:00 stt300 kernel: [ 0.557510] \_SB_.PCI0:_OSC evaluation
returned wrong type
Aug 14 13:39:00 stt300 kernel: [ 0.557514] _OSC request data:1 0 1d
Aug 14 13:39:00 stt300 kernel: [ 0.557524] pci0000:00: ACPI _OSC
request failed (AE_TYPE), returned control mask: 0x1d
Aug 14 13:39:00 stt300 kernel: [ 0.557529] ACPI _OSC control for PCIe
not granted, disabling ASPM
Aug 14 13:39:00 stt300 kernel: [ 0.564414] ACPI: PCI Interrupt Link
[LNKA] (IRQs 3 4 5 7 9 10 *11 12)
Aug 14 13:39:00 stt300 kernel: [ 0.564569] ACPI: PCI Interrupt Link
[LNKB] (IRQs 3 4 5 7 9 *10 11 12)
Aug 14 13:39:00 stt300 kernel: [ 0.564721] ACPI: PCI Interrupt Link
[LNKC] (IRQs 3 4 5 7 9 10 *11 12)
Aug 14 13:39:00 stt300 kernel: [ 0.564871] ACPI: PCI Interrupt Link
[LNKD] (IRQs 3 4 5 7 9 10 *11 12)
Aug 14 13:39:00 stt300 kernel: [ 0.565022] ACPI: PCI Interrupt Link
[LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Aug 14 13:39:00 stt300 kernel: [ 0.565176] ACPI: PCI Interrupt Link
[LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Aug 14 13:39:00 stt300 kernel: [ 0.565329] ACPI: PCI Interrupt Link
[LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Aug 14 13:39:00 stt300 kernel: [ 0.565483] ACPI: PCI Interrupt Link
[LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Aug 14 13:39:00 stt300 kernel: [ 0.565752] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Aug 14 13:39:00 stt300 kernel: [ 0.565774] vgaarb: loaded
Aug 14 13:39:00 stt300 kernel: [ 0.565777] vgaarb: bridge control
possible 0000:00:02.0
Aug 14 13:39:00 stt300 kernel: [ 0.565880] PCI: Using ACPI for IRQ
routing
Aug 14 13:39:00 stt300 kernel: [ 0.574797] PCI: pci_cache_line_size
set to 64 bytes
Aug 14 13:39:00 stt300 kernel: [ 0.574939] reserve RAM buffer:
000000000009fc00 - 000000000009ffff
Aug 14 13:39:00 stt300 kernel: [ 0.574946] reserve RAM buffer:
000000007f43f000 - 000000007fffffff
Aug 14 13:39:00 stt300 kernel: [ 0.574954] reserve RAM buffer:
000000007f600000 - 000000007fffffff
Aug 14 13:39:00 stt300 kernel: [ 0.575232] HPET: 3 timers in total, 0
timers will be used for per-cpu timer
Aug 14 13:39:00 stt300 kernel: [ 0.575244] hpet0: at MMIO 0xfed00000,
IRQs 2, 8, 0
Aug 14 13:39:00 stt300 kernel: [ 0.575255] hpet0: 3 comparators,
64-bit 14.318180 MHz counter
Aug 14 13:39:00 stt300 kernel: [ 0.580081] Switching to clocksource hpet
Aug 14 13:39:00 stt300 kernel: [ 0.583036] pnp: PnP ACPI init
Aug 14 13:39:00 stt300 kernel: [ 0.583079] ACPI: bus type pnp registered
Aug 14 13:39:00 stt300 kernel: [ 0.583816] Switched to NOHz mode on
CPU #0
Aug 14 13:39:00 stt300 kernel: [ 0.583965] Switched to NOHz mode on
CPU #1
Aug 14 13:39:00 stt300 kernel: [ 0.584953] pnp 00:00: [bus 00-ff]
Aug 14 13:39:00 stt300 kernel: [ 0.584960] pnp 00:00: [io
0x0000-0x0cf7 window]
Aug 14 13:39:00 stt300 kernel: [ 0.584966] pnp 00:00: [io 0x0cf8-0x0cff]
Aug 14 13:39:00 stt300 kernel: [ 0.584972] pnp 00:00: [io
0x0d00-0xffff window]
Aug 14 13:39:00 stt300 kernel: [ 0.584979] pnp 00:00: [mem
0x000a0000-0x000bffff window]
Aug 14 13:39:00 stt300 kernel: [ 0.584985] pnp 00:00: [mem
0x000c0000-0x000c3fff window]
Aug 14 13:39:00 stt300 kernel: [ 0.584991] pnp 00:00: [mem
0x000c4000-0x000c7fff window]
Aug 14 13:39:00 stt300 kernel: [ 0.584997] pnp 00:00: [mem
0x000c8000-0x000cbfff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585003] pnp 00:00: [mem
0x000cc000-0x000cffff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585009] pnp 00:00: [mem
0x000d0000-0x000d3fff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585015] pnp 00:00: [mem
0x000d4000-0x000d7fff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585021] pnp 00:00: [mem
0x000d8000-0x000dbfff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585027] pnp 00:00: [mem
0x000dc000-0x000dffff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585034] pnp 00:00: [mem
0x000e0000-0x000e3fff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585040] pnp 00:00: [mem
0x000e4000-0x000e7fff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585046] pnp 00:00: [mem
0x000e8000-0x000ebfff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585052] pnp 00:00: [mem
0x000ec000-0x000effff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585058] pnp 00:00: [mem
0x000f0000-0x000fffff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585064] pnp 00:00: [mem
0x80000000-0xfebfffff window]
Aug 14 13:39:00 stt300 kernel: [ 0.585193] pnp 00:00: Plug and Play
ACPI device, IDs PNP0a08 PNP0a03 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.585515] pnp 00:01: [io 0x002e-0x002f]
Aug 14 13:39:00 stt300 kernel: [ 0.585522] pnp 00:01: [io 0x004e-0x004f]
Aug 14 13:39:00 stt300 kernel: [ 0.585527] pnp 00:01: [io 0x0061]
Aug 14 13:39:00 stt300 kernel: [ 0.585532] pnp 00:01: [io 0x0070]
Aug 14 13:39:00 stt300 kernel: [ 0.585537] pnp 00:01: [io 0x0080]
Aug 14 13:39:00 stt300 kernel: [ 0.585546] pnp 00:01: [io 0x0092]
Aug 14 13:39:00 stt300 kernel: [ 0.585551] pnp 00:01: [io 0x00b2-0x00b3]
Aug 14 13:39:00 stt300 kernel: [ 0.585556] pnp 00:01: [io 0x0063]
Aug 14 13:39:00 stt300 kernel: [ 0.585561] pnp 00:01: [io 0x0065]
Aug 14 13:39:00 stt300 kernel: [ 0.585566] pnp 00:01: [io 0x0067]
Aug 14 13:39:00 stt300 kernel: [ 0.585572] pnp 00:01: [io 0x0600-0x060f]
Aug 14 13:39:00 stt300 kernel: [ 0.585577] pnp 00:01: [io 0x0610]
Aug 14 13:39:00 stt300 kernel: [ 0.585582] pnp 00:01: [io 0x0800-0x080f]
Aug 14 13:39:00 stt300 kernel: [ 0.585587] pnp 00:01: [io 0x0810-0x0817]
Aug 14 13:39:00 stt300 kernel: [ 0.585593] pnp 00:01: [io 0x0400-0x047f]
Aug 14 13:39:00 stt300 kernel: [ 0.585598] pnp 00:01: [io 0x0500-0x053f]
Aug 14 13:39:00 stt300 kernel: [ 0.585604] pnp 00:01: [mem
0xe0000000-0xefffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.585610] pnp 00:01: [mem
0xfed1c000-0xfed1ffff]
Aug 14 13:39:00 stt300 kernel: [ 0.585616] pnp 00:01: [mem
0xfed14000-0xfed17fff]
Aug 14 13:39:00 stt300 kernel: [ 0.585621] pnp 00:01: [mem
0xfed18000-0xfed18fff]
Aug 14 13:39:00 stt300 kernel: [ 0.585627] pnp 00:01: [mem
0xfed19000-0xfed19fff]
Aug 14 13:39:00 stt300 kernel: [ 0.585633] pnp 00:01: [mem
0xfec00000-0xfec00fff]
Aug 14 13:39:00 stt300 kernel: [ 0.585639] pnp 00:01: [mem
0xfee00000-0xfee00fff]
Aug 14 13:39:00 stt300 kernel: [ 0.585782] system 00:01: [io
0x0600-0x060f] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585790] system 00:01: [io 0x0610]
has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585797] system 00:01: [io
0x0800-0x080f] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585804] system 00:01: [io
0x0810-0x0817] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585812] system 00:01: [io
0x0400-0x047f] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585820] system 00:01: [io
0x0500-0x053f] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585829] system 00:01: [mem
0xe0000000-0xefffffff] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585836] system 00:01: [mem
0xfed1c000-0xfed1ffff] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585844] system 00:01: [mem
0xfed14000-0xfed17fff] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585851] system 00:01: [mem
0xfed18000-0xfed18fff] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585859] system 00:01: [mem
0xfed19000-0xfed19fff] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585867] system 00:01: [mem
0xfec00000-0xfec00fff] could not be reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585875] system 00:01: [mem
0xfee00000-0xfee00fff] has been reserved
Aug 14 13:39:00 stt300 kernel: [ 0.585883] system 00:01: Plug and
Play ACPI device, IDs PNP0c02 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.585911] pnp 00:02: [io 0x0000-0x001f]
Aug 14 13:39:00 stt300 kernel: [ 0.585917] pnp 00:02: [io 0x0081-0x0091]
Aug 14 13:39:00 stt300 kernel: [ 0.585922] pnp 00:02: [io 0x0093-0x009f]
Aug 14 13:39:00 stt300 kernel: [ 0.585927] pnp 00:02: [io 0x00c0-0x00df]
Aug 14 13:39:00 stt300 kernel: [ 0.585933] pnp 00:02: [dma 4]
Aug 14 13:39:00 stt300 kernel: [ 0.586005] pnp 00:02: Plug and Play
ACPI device, IDs PNP0200 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.586071] pnp 00:03: [io 0x0070-0x0077]
Aug 14 13:39:00 stt300 kernel: [ 0.586140] pnp 00:03: Plug and Play
ACPI device, IDs PNP0b00 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.586305] pnp 00:04: [irq 0 disabled]
Aug 14 13:39:00 stt300 kernel: [ 0.586323] pnp 00:04: [irq 8]
Aug 14 13:39:00 stt300 kernel: [ 0.586329] pnp 00:04: [mem
0xfed00000-0xfed003ff]
Aug 14 13:39:00 stt300 kernel: [ 0.586400] pnp 00:04: Plug and Play
ACPI device, IDs PNP0103 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.586432] pnp 00:05: [io 0x00f0]
Aug 14 13:39:00 stt300 kernel: [ 0.586443] pnp 00:05: [irq 13]
Aug 14 13:39:00 stt300 kernel: [ 0.586515] pnp 00:05: Plug and Play
ACPI device, IDs PNP0c04 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.586545] pnp 00:06: [mem
0xff800000-0xffffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.586620] pnp 00:06: Plug and Play
ACPI device, IDs INT0800 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.586679] pnp 00:07: [io 0x0060]
Aug 14 13:39:00 stt300 kernel: [ 0.586685] pnp 00:07: [io 0x0064]
Aug 14 13:39:00 stt300 kernel: [ 0.586696] pnp 00:07: [irq 1]
Aug 14 13:39:00 stt300 kernel: [ 0.586769] pnp 00:07: Plug and Play
ACPI device, IDs PNP0303 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.586819] pnp 00:08: [irq 12]
Aug 14 13:39:00 stt300 kernel: [ 0.586899] pnp 00:08: Plug and Play
ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active)
Aug 14 13:39:00 stt300 kernel: [ 0.587082] pnp: PnP ACPI: found 9 devices
Aug 14 13:39:00 stt300 kernel: [ 0.587086] ACPI: ACPI bus type pnp
unregistered
Aug 14 13:39:00 stt300 kernel: [ 0.587094] PnPBIOS: Disabled by ACPI PNP
Aug 14 13:39:00 stt300 kernel: [ 0.626289] PCI: max bus depth: 1
pci_try_num: 2
Aug 14 13:39:00 stt300 kernel: [ 0.626339] pci 0000:00:1c.0: PCI
bridge to [bus 01-01]
Aug 14 13:39:00 stt300 kernel: [ 0.626347] pci 0000:00:1c.0: bridge
window [io 0x2000-0x2fff]
Aug 14 13:39:00 stt300 kernel: [ 0.626358] pci 0000:00:1c.0: bridge
window [mem 0x93000000-0x93ffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626368] pci 0000:00:1c.0: bridge
window [mem 0x90000000-0x90ffffff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.626380] pci 0000:00:1c.1: PCI
bridge to [bus 02-02]
Aug 14 13:39:00 stt300 kernel: [ 0.626388] pci 0000:00:1c.1: bridge
window [io 0x1000-0x1fff]
Aug 14 13:39:00 stt300 kernel: [ 0.626398] pci 0000:00:1c.1: bridge
window [mem 0x92000000-0x92ffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626407] pci 0000:00:1c.1: bridge
window [mem 0x91000000-0x91ffffff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.626419] pci 0000:00:1e.0: PCI
bridge to [bus 03-03]
Aug 14 13:39:00 stt300 kernel: [ 0.626424] pci 0000:00:1e.0: bridge
window [io disabled]
Aug 14 13:39:00 stt300 kernel: [ 0.626432] pci 0000:00:1e.0: bridge
window [mem disabled]
Aug 14 13:39:00 stt300 kernel: [ 0.626440] pci 0000:00:1e.0: bridge
window [mem pref disabled]
Aug 14 13:39:00 stt300 kernel: [ 0.626473] pci 0000:00:1c.0: PCI INT
A -> GSI 16 (level, low) -> IRQ 16
Aug 14 13:39:00 stt300 kernel: [ 0.626484] pci 0000:00:1c.0: setting
latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 0.626502] pci 0000:00:1c.1: PCI INT
B -> GSI 17 (level, low) -> IRQ 17
Aug 14 13:39:00 stt300 kernel: [ 0.626511] pci 0000:00:1c.1: setting
latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 0.626524] pci 0000:00:1e.0: setting
latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 0.626532] pci_bus 0000:00: resource
4 [io 0x0000-0x0cf7]
Aug 14 13:39:00 stt300 kernel: [ 0.626538] pci_bus 0000:00: resource
5 [io 0x0d00-0xffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626544] pci_bus 0000:00: resource
6 [mem 0x000a0000-0x000bffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626551] pci_bus 0000:00: resource
7 [mem 0x80000000-0xfebfffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626557] pci_bus 0000:01: resource
0 [io 0x2000-0x2fff]
Aug 14 13:39:00 stt300 kernel: [ 0.626563] pci_bus 0000:01: resource
1 [mem 0x93000000-0x93ffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626570] pci_bus 0000:01: resource
2 [mem 0x90000000-0x90ffffff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.626576] pci_bus 0000:02: resource
0 [io 0x1000-0x1fff]
Aug 14 13:39:00 stt300 kernel: [ 0.626582] pci_bus 0000:02: resource
1 [mem 0x92000000-0x92ffffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626589] pci_bus 0000:02: resource
2 [mem 0x91000000-0x91ffffff 64bit pref]
Aug 14 13:39:00 stt300 kernel: [ 0.626596] pci_bus 0000:03: resource
4 [io 0x0000-0x0cf7]
Aug 14 13:39:00 stt300 kernel: [ 0.626602] pci_bus 0000:03: resource
5 [io 0x0d00-0xffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626608] pci_bus 0000:03: resource
6 [mem 0x000a0000-0x000bffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626614] pci_bus 0000:03: resource
7 [mem 0x80000000-0xfebfffff]
Aug 14 13:39:00 stt300 kernel: [ 0.626762] NET: Registered protocol
family 2
Aug 14 13:39:00 stt300 kernel: [ 0.626977] IP route cache hash table
entries: 32768 (order: 5, 131072 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.627667] TCP established hash table
entries: 131072 (order: 8, 1048576 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.628644] TCP bind hash table
entries: 65536 (order: 7, 524288 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.629074] TCP: Hash tables
configured (established 131072 bind 65536)
Aug 14 13:39:00 stt300 kernel: [ 0.629080] TCP reno registered
Aug 14 13:39:00 stt300 kernel: [ 0.629088] UDP hash table entries:
512 (order: 2, 16384 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.629107] UDP-Lite hash table
entries: 512 (order: 2, 16384 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.629583] NET: Registered protocol
family 1
Aug 14 13:39:00 stt300 kernel: [ 0.629621] pci 0000:00:02.0: Boot
video device
Aug 14 13:39:00 stt300 kernel: [ 0.644096] PCI: CLS 64 bytes, default 64
Aug 14 13:39:00 stt300 kernel: [ 0.644208] Unpacking initramfs...
Aug 14 13:39:00 stt300 kernel: [ 0.761164] Freeing initrd memory:
2316k freed
Aug 14 13:39:00 stt300 kernel: [ 0.762851] Simple Boot Flag at 0x44
set to 0x1
Aug 14 13:39:00 stt300 kernel: [ 0.763769] audit: initializing
netlink socket (disabled)
Aug 14 13:39:00 stt300 kernel: [ 0.763803] type=2000
audit(1313321927.756:1): initialized
Aug 14 13:39:00 stt300 kernel: [ 0.795592] highmem bounce pool size:
64 pages
Aug 14 13:39:00 stt300 kernel: [ 0.795605] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
Aug 14 13:39:00 stt300 kernel: [ 0.804884] VFS: Disk quotas dquot_6.5.2
Aug 14 13:39:00 stt300 kernel: [ 0.805057] Dquot-cache hash table
entries: 1024 (order 0, 4096 bytes)
Aug 14 13:39:00 stt300 kernel: [ 0.805281] msgmni has been set to 1734
Aug 14 13:39:00 stt300 kernel: [ 0.805715] alg: No test for stdrng (krng)
Aug 14 13:39:00 stt300 kernel: [ 0.805796] Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 253)
Aug 14 13:39:00 stt300 kernel: [ 0.805804] io scheduler noop registered
Aug 14 13:39:00 stt300 kernel: [ 0.805808] io scheduler deadline
registered
Aug 14 13:39:00 stt300 kernel: [ 0.805846] io scheduler cfq
registered (default)
Aug 14 13:39:00 stt300 kernel: [ 0.806039] pcieport 0000:00:1c.0:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 0.806112] pcieport 0000:00:1c.0: irq
40 for MSI/MSI-X
Aug 14 13:39:00 stt300 kernel: [ 0.806240] pcieport 0000:00:1c.1:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 0.806307] pcieport 0000:00:1c.1: irq
41 for MSI/MSI-X
Aug 14 13:39:00 stt300 kernel: [ 0.806683] ERST: Table is not found!
Aug 14 13:39:00 stt300 kernel: [ 0.806713] isapnp: Scanning for PnP
cards...
Aug 14 13:39:00 stt300 kernel: [ 1.160568] isapnp: No Plug & Play
device found
Aug 14 13:39:00 stt300 kernel: [ 1.160723] Serial: 8250/16550 driver,
4 ports, IRQ sharing enabled
Aug 14 13:39:00 stt300 kernel: [ 1.161975] Linux agpgart interface v0.103
Aug 14 13:39:00 stt300 kernel: [ 1.162207] agpgart-intel
0000:00:00.0: Intel GMA3150 Chipset
Aug 14 13:39:00 stt300 kernel: [ 1.162427] agpgart-intel
0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
Aug 14 13:39:00 stt300 kernel: [ 1.162687] agpgart-intel
0000:00:00.0: detected 8192K stolen memory
Aug 14 13:39:00 stt300 kernel: [ 1.162915] agpgart-intel
0000:00:00.0: AGP aperture is 256M @ 0x80000000
Aug 14 13:39:00 stt300 kernel: [ 1.163249] i8042: PNP: PS/2
Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
Aug 14 13:39:00 stt300 kernel: [ 1.168513] serio: i8042 KBD port at
0x60,0x64 irq 1
Aug 14 13:39:00 stt300 kernel: [ 1.168532] serio: i8042 AUX port at
0x60,0x64 irq 12
Aug 14 13:39:00 stt300 kernel: [ 1.168834] mousedev: PS/2 mouse
device common for all mice
Aug 14 13:39:00 stt300 kernel: [ 1.168944] rtc_cmos 00:03: RTC can
wake from S4
Aug 14 13:39:00 stt300 kernel: [ 1.169115] rtc_cmos 00:03: rtc core:
registered rtc_cmos as rtc0
Aug 14 13:39:00 stt300 kernel: [ 1.169153] rtc0: alarms up to one
month, 242 bytes nvram, hpet irqs
Aug 14 13:39:00 stt300 kernel: [ 1.169181] cpuidle: using governor ladder
Aug 14 13:39:00 stt300 kernel: [ 1.169185] cpuidle: using governor menu
Aug 14 13:39:00 stt300 kernel: [ 1.169830] TCP cubic registered
Aug 14 13:39:00 stt300 kernel: [ 1.169937] NET: Registered protocol
family 10
Aug 14 13:39:00 stt300 kernel: [ 1.171486] Mobile IPv6
Aug 14 13:39:00 stt300 kernel: [ 1.171493] NET: Registered protocol
family 17
Aug 14 13:39:00 stt300 kernel: [ 1.171503] Registering the
dns_resolver key type
Aug 14 13:39:00 stt300 kernel: [ 1.171562] Using IPI No-Shortcut mode
Aug 14 13:39:00 stt300 kernel: [ 1.171788] PM: Hibernation image not
present or could not be loaded.
Aug 14 13:39:00 stt300 kernel: [ 1.171816] registered taskstats version 1
Aug 14 13:39:00 stt300 kernel: [ 1.176970] rtc_cmos 00:03: setting
system clock to 2011-08-14 11:38:48 UTC (1313321928)
Aug 14 13:39:00 stt300 kernel: [ 1.177078] Initializing network drop
monitor service
Aug 14 13:39:00 stt300 kernel: [ 1.177323] Freeing unused kernel
memory: 404k freed
Aug 14 13:39:00 stt300 kernel: [ 1.177685] Write protecting the
kernel text: 2768k
Aug 14 13:39:00 stt300 kernel: [ 1.177760] Write protecting the
kernel read-only data: 1068k
Aug 14 13:39:00 stt300 kernel: [ 1.177765] NX-protecting the kernel
data: 3376k
Aug 14 13:39:00 stt300 kernel: [ 1.294585] input: AT Translated Set 2
keyboard as /devices/platform/i8042/serio0/input/input0
Aug 14 13:39:00 stt300 kernel: [ 1.352206] ACPI Warning: For
\_TZ_.THRM._AL0: Return Package has no elements (empty)
(20110413/nspredef-456)
Aug 14 13:39:00 stt300 kernel: [ 1.352229] ACPI: [Package] has zero
elements (f5953e00)
Aug 14 13:39:00 stt300 kernel: [ 1.352316] ACPI: Invalid active0
threshold
Aug 14 13:39:00 stt300 kernel: [ 1.361502] thermal LNXTHERM:00:
registered as thermal_zone0
Aug 14 13:39:00 stt300 kernel: [ 1.361513] ACPI: Thermal Zone [THRM]
(44 C)
Aug 14 13:39:00 stt300 kernel: [ 1.369279] SCSI subsystem initialized
Aug 14 13:39:00 stt300 kernel: [ 1.388653] libata version 3.00 loaded.
Aug 14 13:39:00 stt300 kernel: [ 1.391239] ahci 0000:00:1f.2: version 3.0
Aug 14 13:39:00 stt300 kernel: [ 1.391272] ahci 0000:00:1f.2: PCI INT
B -> GSI 17 (level, low) -> IRQ 17
Aug 14 13:39:00 stt300 kernel: [ 1.391369] ahci 0000:00:1f.2: irq 42
for MSI/MSI-X
Aug 14 13:39:00 stt300 kernel: [ 1.391557] ahci: SSS flag set,
parallel bus scan disabled
Aug 14 13:39:00 stt300 kernel: [ 1.391615] ahci 0000:00:1f.2: AHCI
0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
Aug 14 13:39:00 stt300 kernel: [ 1.391627] ahci 0000:00:1f.2: flags:
64bit ncq ilck stag pm led clo pmp pio slum part
Aug 14 13:39:00 stt300 kernel: [ 1.391641] ahci 0000:00:1f.2: setting
latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 1.393755] scsi0 : ahci
Aug 14 13:39:00 stt300 kernel: [ 1.394119] scsi1 : ahci
Aug 14 13:39:00 stt300 kernel: [ 1.394380] scsi2 : ahci
Aug 14 13:39:00 stt300 kernel: [ 1.394638] scsi3 : ahci
Aug 14 13:39:00 stt300 kernel: [ 1.395427] ata1: SATA max UDMA/133
abar m1024@0x94204000 port 0x94204100 irq 42
Aug 14 13:39:00 stt300 kernel: [ 1.395439] ata2: SATA max UDMA/133
abar m1024@0x94204000 port 0x94204180 irq 42
Aug 14 13:39:00 stt300 kernel: [ 1.395447] ata3: DUMMY
Aug 14 13:39:00 stt300 kernel: [ 1.395453] ata4: DUMMY
Aug 14 13:39:00 stt300 kernel: [ 1.760036] Refined TSC clocksource
calibration: 1662.681 MHz.
Aug 14 13:39:00 stt300 kernel: [ 1.760047] Switching to clocksource tsc
Aug 14 13:39:00 stt300 kernel: [ 1.884089] ata1: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Aug 14 13:39:00 stt300 kernel: [ 1.884902] ata1.00: unexpected _GTF
length (4)
Aug 14 13:39:00 stt300 kernel: [ 1.933771] ata1.00: ATA-8:
ST9250315AS, 0001SDM1, max UDMA/133
Aug 14 13:39:00 stt300 kernel: [ 1.933778] ata1.00: 488397168
sectors, multi 16: LBA48 NCQ (depth 31/32)
Aug 14 13:39:00 stt300 kernel: [ 1.935602] ata1.00: unexpected _GTF
length (4)
Aug 14 13:39:00 stt300 kernel: [ 1.935940] ata1.00: configured for
UDMA/133
Aug 14 13:39:00 stt300 kernel: [ 1.936304] scsi 0:0:0:0:
Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
Aug 14 13:39:00 stt300 kernel: [ 2.256037] ata2: SATA link down
(SStatus 0 SControl 300)
Aug 14 13:39:00 stt300 kernel: [ 2.268646] sd 0:0:0:0: [sda]
488397168 512-byte logical blocks: (250 GB/232 GiB)
Aug 14 13:39:00 stt300 kernel: [ 2.268864] sd 0:0:0:0: [sda] Write
Protect is off
Aug 14 13:39:00 stt300 kernel: [ 2.268874] sd 0:0:0:0: [sda] Mode
Sense: 00 3a 00 00
Aug 14 13:39:00 stt300 kernel: [ 2.268980] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 13:39:00 stt300 kernel: [ 2.391332] sda: sda1 sda2
Aug 14 13:39:00 stt300 kernel: [ 2.392198] sd 0:0:0:0: [sda] Attached
SCSI disk
Aug 14 13:39:00 stt300 kernel: [ 2.964556] PM: Starting manual resume
from disk
Aug 14 13:39:00 stt300 kernel: [ 2.964564] PM: Hibernation image
partition 8:1 present
Aug 14 13:39:00 stt300 kernel: [ 2.964568] PM: Looking for
hibernation image.
Aug 14 13:39:00 stt300 kernel: [ 2.965033] PM: Image not found (code -22)
Aug 14 13:39:00 stt300 kernel: [ 2.965037] PM: Hibernation image not
present or could not be loaded.
Aug 14 13:39:00 stt300 kernel: [ 2.975052] REISERFS (device sda2):
found reiserfs format "3.6" with standard journal
Aug 14 13:39:00 stt300 kernel: [ 2.975081] REISERFS (device sda2):
using ordered data mode
Aug 14 13:39:00 stt300 kernel: [ 2.981906] REISERFS (device sda2):
journal params: device sda2, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 14 13:39:00 stt300 kernel: [ 2.982780] REISERFS (device sda2):
checking transaction log (sda2)
Aug 14 13:39:00 stt300 kernel: [ 3.065005] REISERFS (device sda2):
Using r5 hash to sort names
Aug 14 13:39:00 stt300 kernel: [ 5.768446] ACPI: acpi_idle registered
with cpuidle
Aug 14 13:39:00 stt300 kernel: [ 5.775322] Marking TSC unstable due
to TSC halts in idle
Aug 14 13:39:00 stt300 kernel: [ 5.783618] Switching to clocksource hpet
Aug 14 13:39:00 stt300 kernel: [ 5.797532] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Aug 14 13:39:00 stt300 kernel: [ 5.797550] ACPI: Power Button [PWRB]
Aug 14 13:39:00 stt300 kernel: [ 5.797763] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
Aug 14 13:39:00 stt300 kernel: [ 5.799241] ACPI: Lid Switch [LID0]
Aug 14 13:39:00 stt300 kernel: [ 5.799519] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Aug 14 13:39:00 stt300 kernel: [ 5.799536] ACPI: Power Button [PWRF]
Aug 14 13:39:00 stt300 kernel: [ 5.812438] wmi: Mapper loaded
Aug 14 13:39:00 stt300 kernel: [ 5.945040] ACPI: Battery Slot [BAT0]
(battery present)
Aug 14 13:39:00 stt300 kernel: [ 6.001603] r8169 Gigabit Ethernet
driver 2.3LK-NAPI loaded
Aug 14 13:39:00 stt300 kernel: [ 6.001684] r8169 0000:01:00.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Aug 14 13:39:00 stt300 kernel: [ 6.001825] r8169 0000:01:00.0:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 6.001849] r8169 0000:01:00.0:
(unregistered net_device): unknown MAC, using family default
Aug 14 13:39:00 stt300 kernel: [ 6.002059] r8169 0000:01:00.0: irq 43
for MSI/MSI-X
Aug 14 13:39:00 stt300 kernel: [ 6.003446] r8169 0000:01:00.0: eth0:
RTL8101e at 0xf8306000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43
Aug 14 13:39:00 stt300 kernel: [ 6.015224] usbcore: registered new
interface driver usbfs
Aug 14 13:39:00 stt300 kernel: [ 6.015298] usbcore: registered new
interface driver hub
Aug 14 13:39:00 stt300 kernel: [ 6.015429] usbcore: registered new
device driver usb
Aug 14 13:39:00 stt300 kernel: [ 6.113107] i801_smbus 0000:00:1f.3:
PCI INT B -> GSI 17 (level, low) -> IRQ 17
Aug 14 13:39:00 stt300 kernel: [ 6.123609] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
Aug 14 13:39:00 stt300 kernel: [ 6.123681] ehci_hcd 0000:00:1d.7: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Aug 14 13:39:00 stt300 kernel: [ 6.123726] ehci_hcd 0000:00:1d.7:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 6.123736] ehci_hcd 0000:00:1d.7:
EHCI Host Controller
Aug 14 13:39:00 stt300 kernel: [ 6.123839] ehci_hcd 0000:00:1d.7: new
USB bus registered, assigned bus number 1
Aug 14 13:39:00 stt300 kernel: [ 6.123903] ehci_hcd 0000:00:1d.7:
using broken periodic workaround
Aug 14 13:39:00 stt300 kernel: [ 6.123926] ehci_hcd 0000:00:1d.7:
debug port 1
Aug 14 13:39:00 stt300 kernel: [ 6.127832] ehci_hcd 0000:00:1d.7:
cache line size of 64 is not supported
Aug 14 13:39:00 stt300 kernel: [ 6.127874] ehci_hcd 0000:00:1d.7: irq
16, io mem 0x94204400
Aug 14 13:39:00 stt300 kernel: [ 6.140083] ehci_hcd 0000:00:1d.7: USB
2.0 started, EHCI 1.00
Aug 14 13:39:00 stt300 kernel: [ 6.140162] usb usb1: New USB device
found, idVendor=1d6b, idProduct=0002
Aug 14 13:39:00 stt300 kernel: [ 6.140169] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Aug 14 13:39:00 stt300 kernel: [ 6.140174] usb usb1: Product: EHCI
Host Controller
Aug 14 13:39:00 stt300 kernel: [ 6.140179] usb usb1: Manufacturer:
Linux 3.0.0-1-686-pae ehci_hcd
Aug 14 13:39:00 stt300 kernel: [ 6.140185] usb usb1: SerialNumber:
0000:00:1d.7
Aug 14 13:39:00 stt300 kernel: [ 6.140522] hub 1-0:1.0: USB hub found
Aug 14 13:39:00 stt300 kernel: [ 6.140540] hub 1-0:1.0: 8 ports detected
Aug 14 13:39:00 stt300 kernel: [ 6.332220] cfg80211: Calling CRDA to
update world regulatory domain
Aug 14 13:39:00 stt300 kernel: [ 6.350867] ACPI: AC Adapter [AC]
(off-line)
Aug 14 13:39:00 stt300 kernel: [ 6.452092] usb 1-8: new high speed
USB device number 2 using ehci_hcd
Aug 14 13:39:00 stt300 kernel: [ 6.489361] input: PC Speaker as
/devices/platform/pcspkr/input/input4
Aug 14 13:39:00 stt300 kernel: [ 6.654715] usb 1-8: New USB device
found, idVendor=174f, idProduct=1122
Aug 14 13:39:00 stt300 kernel: [ 6.654729] usb 1-8: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Aug 14 13:39:00 stt300 kernel: [ 6.654740] usb 1-8: Product: HP Webcam
Aug 14 13:39:00 stt300 kernel: [ 6.654747] usb 1-8: Manufacturer: D-MAX
Aug 14 13:39:00 stt300 kernel: [ 6.654755] usb 1-8: SerialNumber: 00
Aug 14 13:39:00 stt300 kernel: [ 6.754662] HDA Intel 0000:00:1b.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Aug 14 13:39:00 stt300 kernel: [ 6.754777] HDA Intel 0000:00:1b.0:
irq 44 for MSI/MSI-X
Aug 14 13:39:00 stt300 kernel: [ 6.754842] HDA Intel 0000:00:1b.0:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 6.796496] uhci_hcd: USB Universal
Host Controller Interface driver
Aug 14 13:39:00 stt300 kernel: [ 6.815218] brcmutil: module is from
the staging directory, the quality is unknown, you have been warned.
Aug 14 13:39:00 stt300 kernel: [ 6.820988] input: HP WMI hotkeys as
/devices/virtual/input/input5
Aug 14 13:39:00 stt300 kernel: [ 6.857159] [drm] Initialized drm
1.1.0 20060810
Aug 14 13:39:00 stt300 kernel: [ 7.006096] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input6
Aug 14 13:39:00 stt300 kernel: [ 7.024481] input: HDA Intel Mic at
Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Aug 14 13:39:00 stt300 kernel: [ 7.024782] input: HDA Intel HP Out at
Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Aug 14 13:39:00 stt300 kernel: [ 7.025452] uhci_hcd 0000:00:1d.0: PCI
INT A -> GSI 16 (level, low) -> IRQ 16
Aug 14 13:39:00 stt300 kernel: [ 7.025477] uhci_hcd 0000:00:1d.0:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 7.025485] uhci_hcd 0000:00:1d.0:
UHCI Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.025510] uhci_hcd 0000:00:1d.0: new
USB bus registered, assigned bus number 2
Aug 14 13:39:00 stt300 kernel: [ 7.025555] uhci_hcd 0000:00:1d.0: irq
16, io base 0x00003080
Aug 14 13:39:00 stt300 kernel: [ 7.025647] usb usb2: New USB device
found, idVendor=1d6b, idProduct=0001
Aug 14 13:39:00 stt300 kernel: [ 7.025654] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Aug 14 13:39:00 stt300 kernel: [ 7.025660] usb usb2: Product: UHCI
Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.025665] usb usb2: Manufacturer:
Linux 3.0.0-1-686-pae uhci_hcd
Aug 14 13:39:00 stt300 kernel: [ 7.025670] usb usb2: SerialNumber:
0000:00:1d.0
Aug 14 13:39:00 stt300 kernel: [ 7.025971] hub 2-0:1.0: USB hub found
Aug 14 13:39:00 stt300 kernel: [ 7.025989] hub 2-0:1.0: 2 ports detected
Aug 14 13:39:00 stt300 kernel: [ 7.026216] uhci_hcd 0000:00:1d.1: PCI
INT C -> GSI 18 (level, low) -> IRQ 18
Aug 14 13:39:00 stt300 kernel: [ 7.026238] uhci_hcd 0000:00:1d.1:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 7.026249] uhci_hcd 0000:00:1d.1:
UHCI Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.026286] uhci_hcd 0000:00:1d.1: new
USB bus registered, assigned bus number 3
Aug 14 13:39:00 stt300 kernel: [ 7.026373] uhci_hcd 0000:00:1d.1: irq
18, io base 0x00003060
Aug 14 13:39:00 stt300 kernel: [ 7.026494] usb usb3: New USB device
found, idVendor=1d6b, idProduct=0001
Aug 14 13:39:00 stt300 kernel: [ 7.026504] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Aug 14 13:39:00 stt300 kernel: [ 7.026511] usb usb3: Product: UHCI
Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.026518] usb usb3: Manufacturer:
Linux 3.0.0-1-686-pae uhci_hcd
Aug 14 13:39:00 stt300 kernel: [ 7.026525] usb usb3: SerialNumber:
0000:00:1d.1
Aug 14 13:39:00 stt300 kernel: [ 7.026931] hub 3-0:1.0: USB hub found
Aug 14 13:39:00 stt300 kernel: [ 7.026953] hub 3-0:1.0: 2 ports detected
Aug 14 13:39:00 stt300 kernel: [ 7.027180] uhci_hcd 0000:00:1d.2: PCI
INT B -> GSI 17 (level, low) -> IRQ 17
Aug 14 13:39:00 stt300 kernel: [ 7.027202] uhci_hcd 0000:00:1d.2:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 7.027213] uhci_hcd 0000:00:1d.2:
UHCI Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.027240] uhci_hcd 0000:00:1d.2: new
USB bus registered, assigned bus number 4
Aug 14 13:39:00 stt300 kernel: [ 7.027325] uhci_hcd 0000:00:1d.2: irq
17, io base 0x00003040
Aug 14 13:39:00 stt300 kernel: [ 7.027449] usb usb4: New USB device
found, idVendor=1d6b, idProduct=0001
Aug 14 13:39:00 stt300 kernel: [ 7.027459] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Aug 14 13:39:00 stt300 kernel: [ 7.027466] usb usb4: Product: UHCI
Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.027473] usb usb4: Manufacturer:
Linux 3.0.0-1-686-pae uhci_hcd
Aug 14 13:39:00 stt300 kernel: [ 7.027480] usb usb4: SerialNumber:
0000:00:1d.2
Aug 14 13:39:00 stt300 kernel: [ 7.027871] hub 4-0:1.0: USB hub found
Aug 14 13:39:00 stt300 kernel: [ 7.027891] hub 4-0:1.0: 2 ports detected
Aug 14 13:39:00 stt300 kernel: [ 7.028179] uhci_hcd 0000:00:1d.3: PCI
INT D -> GSI 19 (level, low) -> IRQ 19
Aug 14 13:39:00 stt300 kernel: [ 7.028204] uhci_hcd 0000:00:1d.3:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 7.028214] uhci_hcd 0000:00:1d.3:
UHCI Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.028244] uhci_hcd 0000:00:1d.3: new
USB bus registered, assigned bus number 5
Aug 14 13:39:00 stt300 kernel: [ 7.028333] uhci_hcd 0000:00:1d.3: irq
19, io base 0x00003020
Aug 14 13:39:00 stt300 kernel: [ 7.028452] usb usb5: New USB device
found, idVendor=1d6b, idProduct=0001
Aug 14 13:39:00 stt300 kernel: [ 7.028462] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Aug 14 13:39:00 stt300 kernel: [ 7.028470] usb usb5: Product: UHCI
Host Controller
Aug 14 13:39:00 stt300 kernel: [ 7.028477] usb usb5: Manufacturer:
Linux 3.0.0-1-686-pae uhci_hcd
Aug 14 13:39:00 stt300 kernel: [ 7.028484] usb usb5: SerialNumber:
0000:00:1d.3
Aug 14 13:39:00 stt300 kernel: [ 7.028912] hub 5-0:1.0: USB hub found
Aug 14 13:39:00 stt300 kernel: [ 7.028930] hub 5-0:1.0: 2 ports detected
Aug 14 13:39:00 stt300 kernel: [ 7.138559] i915 0000:00:02.0: power
state changed by ACPI to D0
Aug 14 13:39:00 stt300 kernel: [ 7.138571] i915 0000:00:02.0: power
state changed by ACPI to D0
Aug 14 13:39:00 stt300 kernel: [ 7.138584] i915 0000:00:02.0: PCI INT
A -> GSI 16 (level, low) -> IRQ 16
Aug 14 13:39:00 stt300 kernel: [ 7.138593] i915 0000:00:02.0: setting
latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 7.194697] i915 0000:00:02.0: irq 45
for MSI/MSI-X
Aug 14 13:39:00 stt300 kernel: [ 7.194711] [drm] Supports vblank
timestamp caching Rev 1 (10.10.2010).
Aug 14 13:39:00 stt300 kernel: [ 7.194716] [drm] Driver supports
precise vblank timestamp query.
Aug 14 13:39:00 stt300 kernel: [ 7.194806] vgaarb: device changed
decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Aug 14 13:39:00 stt300 kernel: [ 7.255232] brcmsmac: module is from
the staging directory, the quality is unknown, you have been warned.
Aug 14 13:39:00 stt300 kernel: [ 7.266179] brcmsmac 0000:02:00.0: bus
2 slot 0 func 0 irq 10
Aug 14 13:39:00 stt300 kernel: [ 7.266215] brcmsmac 0000:02:00.0: PCI
INT A -> GSI 17 (level, low) -> IRQ 17
Aug 14 13:39:00 stt300 kernel: [ 7.266234] brcmsmac 0000:02:00.0:
setting latency timer to 64
Aug 14 13:39:00 stt300 kernel: [ 7.313284] Linux media interface: v0.10
Aug 14 13:39:00 stt300 kernel: [ 7.324455] Linux video capture
interface: v2.00
Aug 14 13:39:00 stt300 kernel: [ 7.338115] uvcvideo: Found UVC 1.00
device HP Webcam (174f:1122)
Aug 14 13:39:00 stt300 kernel: [ 7.351556] input: HP Webcam as
/devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
Aug 14 13:39:00 stt300 kernel: [ 7.351796] usbcore: registered new
interface driver uvcvideo
Aug 14 13:39:00 stt300 kernel: [ 7.351804] USB Video Class driver
(v1.1.0)
Aug 14 13:39:00 stt300 kernel: [ 7.518589] [drm] initialized overlay
support
Aug 14 13:39:00 stt300 kernel: [ 7.539074] fbcon: inteldrmfb (fb0) is
primary device
Aug 14 13:39:00 stt300 kernel: [ 7.588281] Console: switching to
colour frame buffer device 128x37
Aug 14 13:39:00 stt300 kernel: [ 7.597366] fb0: inteldrmfb frame
buffer device
Aug 14 13:39:00 stt300 kernel: [ 7.597371] drm: registered panic notifier
Aug 14 13:39:00 stt300 kernel: [ 7.615502] acpi device:21: registered
as cooling_device2
Aug 14 13:39:00 stt300 kernel: [ 7.616165] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
Aug 14 13:39:00 stt300 kernel: [ 7.616336] ACPI: Video Device [OVGA]
(multi-head: yes rom: no post: no)
Aug 14 13:39:00 stt300 kernel: [ 7.616480] [drm] Initialized i915
1.6.0 20080730 for 0000:00:02.0 on minor 0
Aug 14 13:39:00 stt300 kernel: [ 7.815387] Synaptics Touchpad, model:
1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400
Aug 14 13:39:00 stt300 kernel: [ 7.861970] input: SynPS/2 Synaptics
TouchPad as /devices/platform/i8042/serio1/input/input11
Aug 14 13:39:00 stt300 kernel: [ 7.905114] ieee80211 phy0: Selected
rate control algorithm 'minstrel_ht'
Aug 14 13:39:00 stt300 kernel: [ 8.562929] cfg80211: World regulatory
domain updated:
Aug 14 13:39:00 stt300 kernel: [ 8.562937] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:39:00 stt300 kernel: [ 8.562944] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.562951] cfg80211: (2457000 KHz
- 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.562957] cfg80211: (2474000 KHz
- 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.562963] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.562970] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.562998] cfg80211: Calling CRDA for
country: US
Aug 14 13:39:00 stt300 kernel: [ 8.575099] cfg80211: Regulatory
domain changed to country: US
Aug 14 13:39:00 stt300 kernel: [ 8.575107] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:39:00 stt300 kernel: [ 8.575114] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.575121] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.575127] cfg80211: (5250000 KHz
- 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.575133] cfg80211: (5490000 KHz
- 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.575140] cfg80211: (5650000 KHz
- 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.575146] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.617805] cfg80211: Calling CRDA for
country: EU
Aug 14 13:39:00 stt300 kernel: [ 8.629409] cfg80211: Regulatory
domain changed to country: EU
Aug 14 13:39:00 stt300 kernel: [ 8.629417] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:39:00 stt300 kernel: [ 8.629424] cfg80211: (2402000 KHz
- 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.629430] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.629436] cfg80211: (5250000 KHz
- 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:39:00 stt300 kernel: [ 8.629442] cfg80211: (5490000 KHz
- 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Aug 14 13:39:00 stt300 kernel: [ 10.064927] Adding 3905532k swap on
/dev/sda1. Priority:-1 extents:1 across:3905532k
Aug 14 13:39:00 stt300 kernel: [ 10.494607] loop: module loaded
Aug 14 13:39:00 stt300 kernel: [ 12.173978] fuse init (API version 7.16)
Aug 14 13:39:01 stt300 kernel: [ 13.994612] input: ACPI Virtual
Keyboard Device as /devices/virtual/input/input12
Aug 14 13:39:01 stt300 NetworkManager[1181]: <info> NetworkManager
(version 0.8.4.0) is starting...
Aug 14 13:39:01 stt300 NetworkManager[1181]: <info> Read config file
/etc/NetworkManager/NetworkManager.conf
Aug 14 13:39:01 stt300 NetworkManager[1181]: <info> trying to start the
modem manager...
Aug 14 13:39:01 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.ModemManager' (using servicehelper)
Aug 14 13:39:01 stt300 modem-manager[1190]: <info> ModemManager
(version 0.4.997) starting...
Aug 14 13:39:01 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.ModemManager'
Aug 14 13:39:02 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.PolicyKit1' (using servicehelper)
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Longcheer
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Novatel
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin SimTech
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Nokia
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Gobi
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Option
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Sierra
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin AnyData
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Generic
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin MotoC
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Option
High-Speed
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin
Ericsson MBM
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Samsung
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Huawei
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin ZTE
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin X22X
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Linktop
Aug 14 13:39:02 stt300 modem-manager[1190]: <info> Loaded plugin Wavecom
Aug 14 13:39:02 stt300 polkitd[1195]: started daemon version 0.102 using
authority implementation `local' version `0.102'
Aug 14 13:39:02 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.PolicyKit1'
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> monitoring kernel
firmware directory '/lib/firmware'.
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: init!
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
update_system_hostname
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPluginIfupdown:
management mode: unmanaged
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
devices added (path:
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0, iface: eth0)
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
device added (path:
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0, iface:
eth0): no ifupdown configuration found.
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
devices added (path:
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0)
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
device added (path:
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface:
wlan0): no ifupdown configuration found.
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown
configuration found.
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown: end
_init.
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Loaded plugin
ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the
NetworkManager mailing list.
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Loaded plugin
keyfile: (c) 2007 - 2010 Red Hat, Inc. To report bugs please use the
NetworkManager mailing list.
Aug 14 13:39:02 stt300 NetworkManager[1181]: Ifupdown: get unmanaged
devices count: 0
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
(148923920) ... get_connections.
Aug 14 13:39:02 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
(148923920) ... get_connections (managed=false): return empty list.
Aug 14 13:39:02 stt300 NetworkManager[1181]: Ifupdown: get unmanaged
devices count: 0
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> found WiFi radio
killswitch rfkill1 (at
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill1) (driver
<unknown>)
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> found WiFi radio
killswitch rfkill0 (at /sys/devices/platform/hp-wmi/rfkill/rfkill0)
(driver hp-wmi)
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> WiFi enabled by
radio killswitch; enabled by state file
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> WWAN enabled by
radio killswitch; enabled by state file
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> WiMAX enabled by
radio killswitch; enabled by state file
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Networking is
enabled by state file
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): carrier is OFF
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): new Ethernet
device (driver: 'r8169' ifindex: 2)
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): exported as
/org/freedesktop/NetworkManager/Devices/0
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): now managed
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): device state
change: 1 -> 2 (reason 2)
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): bringing up
device.
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): preparing
device.
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (eth0): deactivating
device (reason: 2).
Aug 14 13:39:02 stt300 kernel: [ 15.481126] r8169 0000:01:00.0: eth0:
link down
Aug 14 13:39:02 stt300 kernel: [ 15.481524] ADDRCONF(NETDEV_UP): eth0:
link is not ready
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Added default wired
connection 'Auto eth0' for
/sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/net/eth0
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): driver
supports SSID scans (scan_capa 0x01).
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): new 802.11
WiFi device (driver: 'brcmsmac' ifindex: 3)
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): exported as
/org/freedesktop/NetworkManager/Devices/1
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): now managed
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 1 -> 2 (reason 2)
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): bringing up
device.
Aug 14 13:39:02 stt300 kernel: [ 15.571728] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: true (implement)
Aug 14 13:39:02 stt300 kernel: [ 15.575016] ieee80211 phy0:
wl_ops_config: change monitor mode: false (implement)
Aug 14 13:39:02 stt300 kernel: [ 15.578639] ieee80211 phy0:
wl_ops_config: change power-save mode: false (implement)
Aug 14 13:39:02 stt300 kernel: [ 15.583276] ieee80211 phy0:
wl_ops_bss_info_changed: qos enabled: false (implement)
Aug 14 13:39:02 stt300 kernel: [ 15.587298] ADDRCONF(NETDEV_UP):
wlan0: link is not ready
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0): preparing
device.
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> (wlan0):
deactivating device (reason: 2).
Aug 14 13:39:02 stt300 NetworkManager[1181]:
supplicant_interface_acquire: assertion `mgr_state ==
NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Aug 14 13:39:02 stt300 NetworkManager[1181]: <warn>
/sys/devices/virtual/net/lo: couldn't determine device driver; ignoring...
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> modem-manager is now
available
Aug 14 13:39:02 stt300 NetworkManager[1181]: <warn> bluez error getting
default adapter: The name org.bluez was not provided by any .service files
Aug 14 13:39:02 stt300 NetworkManager[1181]: <info> Trying to start the
supplicant...
Aug 14 13:39:02 stt300 dbus[1166]: [system] Activating service
name='fi.epitest.hostap.WPASupplicant' (using servicehelper)
Aug 14 13:39:03 stt300 dbus[1166]: [system] Successfully activated
service 'fi.epitest.hostap.WPASupplicant'
Aug 14 13:39:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
manager state: down -> idle
Aug 14 13:39:03 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 2 -> 3 (reason 0)
Aug 14 13:39:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
interface state: starting -> ready
Aug 14 13:39:03 stt300 kernel: [ 15.814384] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: false (implement)
Aug 14 13:39:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:39:04 stt300 acpid: starting up with netlink and the input layer
Aug 14 13:39:04 stt300 acpid: 42 rules loaded
Aug 14 13:39:04 stt300 acpid: waiting for events: event logging is off
Aug 14 13:39:04 stt300 kernel: [ 17.404728] apm: BIOS not found.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Found user 'avahi' (UID 105)
and group 'avahi' (GID 110).
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Successfully dropped root
privileges.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: avahi-daemon 0.6.30 starting up.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Successfully called chroot().
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Successfully dropped
remaining capabilities.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Loading service file
/services/udisks.service.
Aug 14 13:39:05 stt300 acpid: client connected from 1237[0:0]
Aug 14 13:39:05 stt300 acpid: 1 client rule loaded
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Network interface enumeration
completed.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Registering HINFO record with
values 'I686'/'LINUX'.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Server startup complete. Host
name is stt300.local. Local service cookie is 3365141641.
Aug 14 13:39:05 stt300 avahi-daemon[1269]: Service "stt300"
(/services/udisks.service) successfully established.
Aug 14 13:39:05 stt300 bluetoothd[1280]: Bluetooth daemon 4.94
Aug 14 13:39:05 stt300 bluetoothd[1280]: Starting SDP server
Aug 14 13:39:05 stt300 kernel: [ 18.522557] Bluetooth: Core ver 2.16
Aug 14 13:39:05 stt300 kernel: [ 18.522637] NET: Registered protocol
family 31
Aug 14 13:39:05 stt300 kernel: [ 18.522644] Bluetooth: HCI device and
connection manager initialized
Aug 14 13:39:05 stt300 kernel: [ 18.522651] Bluetooth: HCI socket
layer initialized
Aug 14 13:39:05 stt300 kernel: [ 18.522656] Bluetooth: L2CAP socket
layer initialized
Aug 14 13:39:05 stt300 kernel: [ 18.522762] Bluetooth: SCO socket
layer initialized
Aug 14 13:39:05 stt300 kernel: [ 18.552815] Bluetooth: BNEP (Ethernet
Emulation) ver 1.3
Aug 14 13:39:05 stt300 kernel: [ 18.552823] Bluetooth: BNEP filters:
protocol multicast
Aug 14 13:39:05 stt300 kernel: [ 18.590539] Bluetooth: RFCOMM TTY
layer initialized
Aug 14 13:39:05 stt300 kernel: [ 18.590553] Bluetooth: RFCOMM socket
layer initialized
Aug 14 13:39:05 stt300 kernel: [ 18.590559] Bluetooth: RFCOMM ver 1.11
Aug 14 13:39:05 stt300 NetworkManager[1181]: <warn> bluez error getting
default adapter: No such adapter
Aug 14 13:39:06 stt300 /usr/sbin/cron[1342]: (CRON) INFO (pidfile fd = 3)
Aug 14 13:39:06 stt300 /usr/sbin/cron[1343]: (CRON) STARTUP (fork ok)
Aug 14 13:39:06 stt300 /usr/sbin/cron[1343]: (CRON) INFO (Running
@reboot jobs)
Aug 14 13:39:07 stt300 kernel: [ 20.145048] lp: driver loaded but no
devices found
Aug 14 13:39:07 stt300 udev-configure-printer: add /module/lp
Aug 14 13:39:07 stt300 udev-configure-printer: Failed to get parent
Aug 14 13:39:07 stt300 kernel: [ 20.567047] ppdev: user-space parallel
port driver
Aug 14 13:39:09 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.ConsoleKit' (using servicehelper)
Aug 14 13:39:10 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.ConsoleKit'
Aug 14 13:39:11 stt300 kernel: [ 24.039332] cpufreq-nforce2: No
nForce2 chipset.
Aug 14 13:39:11 stt300 kernel: [ 24.200436] p4-clockmod: Warning:
EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling
in addition to frequency scaling. You should use that instead of
p4-clockmod, if possible.
Aug 14 13:39:11 stt300 kernel: [ 24.200502] ondemand governor failed,
too long transition latency of HW, fallback to performance governor
Aug 14 13:39:11 stt300 kernel: [ 24.200543] p4-clockmod: P4/Xeon(TM)
CPU On-Demand Clock Modulation available
Aug 14 13:39:12 stt300 kernel: [ 24.676635] powernow: This module only
works with AMD K7 CPUs
Aug 14 13:39:13 stt300 kernel: [ 25.683356] ondemand governor failed,
too long transition latency of HW, fallback to performance governor
Aug 14 13:39:13 stt300 kernel: [ 25.687148] ondemand governor failed,
too long transition latency of HW, fallback to performance governor
Aug 14 13:39:16 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.UPower' (using servicehelper)
Aug 14 13:39:16 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.UPower'
Aug 14 13:39:19 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.UDisks' (using servicehelper)
Aug 14 13:39:19 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.UDisks'
Aug 14 13:39:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:39:25 stt300 dbus[1166]: [system] Activating service
name='org.gnome.ClockApplet.Mechanism' (using servicehelper)
Aug 14 13:39:26 stt300 dbus[1166]: [system] Successfully activated
service 'org.gnome.ClockApplet.Mechanism'
Aug 14 13:39:31 stt300 dbus[1166]: [system] Activating service
name='org.debian.apt' (using servicehelper)
Aug 14 13:39:33 stt300 AptDaemon: INFO: Initializing daemon
Aug 14 13:39:33 stt300 dbus[1166]: [system] Successfully activated
service 'org.debian.apt'
Aug 14 13:39:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
starting connection 'Auto WLAN_B5'
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 3 -> 4 (reason 0)
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): access point 'Auto WLAN_B5' has security, but secrets
are required.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:26 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:40:26 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:40:26 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): asking for new secrets
Aug 14 13:40:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:40:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:37 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:38 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:39 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:40 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:41 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:42 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:43 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:44 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:45 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:46 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:47 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:48 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:49 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:50 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:52 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:54 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:40:54 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:40:54 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): asking for new secrets
Aug 14 13:40:54 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:55 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:56 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:40:57 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:58 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:40:59 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:40:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:40:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:22 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:41:22 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:41:22 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): asking for new secrets
Aug 14 13:41:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:41:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:41:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:41:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:41:36 stt300 wpa_supplicant[1204]: Trying to associate with
00:23:f8:9d:ad:11 (SSID='WLAN_B5' freq=2437 MHz)
Aug 14 13:41:36 stt300 kernel: [ 169.077763] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: true (implement)
Aug 14 13:41:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> associating
Aug 14 13:41:36 stt300 kernel: [ 169.082536] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: false (implement)
Aug 14 13:41:36 stt300 kernel: [ 169.082553] wlan0: authenticate with
00:23:f8:9d:ad:11 (try 1)
Aug 14 13:41:36 stt300 kernel: [ 169.085718] wlan0: authenticated
Aug 14 13:41:36 stt300 kernel: [ 169.085783] wlan0: associate with
00:23:f8:9d:ad:11 (try 1)
Aug 14 13:41:36 stt300 wpa_supplicant[1204]: Associated with
00:23:f8:9d:ad:11
Aug 14 13:41:36 stt300 kernel: [ 169.092294] wlan0: RX AssocResp from
00:23:f8:9d:ad:11 (capab=0x471 status=0 aid=1)
Aug 14 13:41:36 stt300 kernel: [ 169.092304] wlan0: associated
Aug 14 13:41:36 stt300 kernel: [ 169.094072] ieee80211 phy0:
wl_ops_bss_info_changed: qos enabled: false (implement)
Aug 14 13:41:36 stt300 kernel: [ 169.094089] ieee80211 phy0: brcmsmac:
wl_ops_bss_info_changed: associated
Aug 14 13:41:36 stt300 kernel: [ 169.094120] ieee80211 phy0:
wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
Aug 14 13:41:36 stt300 kernel: [ 169.094637] ADDRCONF(NETDEV_CHANGE):
wlan0: link becomes ready
Aug 14 13:41:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: associating -> associated
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: associated -> 4-way handshake
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: 4-way handshake -> group handshake
Aug 14 13:41:37 stt300 wpa_supplicant[1204]: WPA: Key negotiation
completed with 00:23:f8:9d:ad:11 [PTK=TKIP GTK=TKIP]
Aug 14 13:41:37 stt300 wpa_supplicant[1204]: CTRL-EVENT-CONNECTED -
Connection to 00:23:f8:9d:ad:11 completed (auth) [id=3 id_str=]
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: group handshake -> completed
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected
to wireless network 'WLAN_B5'.
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 3 of 5 (IP Configure Start) scheduled.
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 3 of 5 (IP Configure Start) started...
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 7 (reason 0)
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Beginning DHCPv4 transaction (timeout in 45 seconds)
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> dhclient started
with pid 2175
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 3 of 5 (IP Configure Start) complete.
Aug 14 13:41:37 stt300 dhclient: Internet Systems Consortium DHCP Client
4.1.1-P1
Aug 14 13:41:37 stt300 dhclient: Copyright 2004-2010 Internet Systems
Consortium.
Aug 14 13:41:37 stt300 dhclient: All rights reserved.
Aug 14 13:41:37 stt300 dhclient: For info, please visit
https://www.isc.org/software/dhcp/
Aug 14 13:41:37 stt300 dhclient:
Aug 14 13:41:37 stt300 avahi-daemon[1269]: Joining mDNS multicast group
on interface wlan0.IPv6 with address fe80::ae81:12ff:fe34:6963.
Aug 14 13:41:37 stt300 avahi-daemon[1269]: New relevant interface
wlan0.IPv6 for mDNS.
Aug 14 13:41:37 stt300 avahi-daemon[1269]: Registering new address
record for fe80::ae81:12ff:fe34:6963 on wlan0.*.
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): DHCPv4
state changed nbi -> preinit
Aug 14 13:41:37 stt300 dhclient: Listening on LPF/wlan0/ac:81:12:34:69:63
Aug 14 13:41:37 stt300 dhclient: Sending on LPF/wlan0/ac:81:12:34:69:63
Aug 14 13:41:37 stt300 dhclient: Sending on Socket/fallback
Aug 14 13:41:37 stt300 dhclient: DHCPREQUEST on wlan0 to 255.255.255.255
port 67
Aug 14 13:41:37 stt300 dhclient: DHCPACK from 192.168.0.79
Aug 14 13:41:37 stt300 dhclient: bound to 192.168.0.155 -- renewal in
39507 seconds.
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> (wlan0): DHCPv4
state changed preinit -> reboot
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 4 of 5 (IP4 Configure Get) scheduled...
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 4 of 5 (IP4 Configure Get) started...
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> address 192.168.0.155
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> prefix 24
(255.255.255.0)
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> gateway 192.168.0.79
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> nameserver
'80.58.0.33'
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> nameserver
'80.58.32.94'
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> domain name 'lan'
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Scheduling stage 5
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 5 of 5 (IP Configure Commit) scheduled...
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Done scheduling stage 5
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 4 of 5 (IP4 Configure Get) complete.
Aug 14 13:41:37 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 5 of 5 (IP Configure Commit) started...
Aug 14 13:41:37 stt300 avahi-daemon[1269]: Joining mDNS multicast group
on interface wlan0.IPv4 with address 192.168.0.155.
Aug 14 13:41:38 stt300 kernel: [ 170.679777] ieee80211 phy0:
wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
Aug 14 13:41:37 stt300 avahi-daemon[1269]: New relevant interface
wlan0.IPv4 for mDNS.
Aug 14 13:41:37 stt300 avahi-daemon[1269]: Registering new address
record for 192.168.0.155 on wlan0.IPv4.
Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 7 -> 8 (reason 0)
Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> (wlan0): roamed from
BSSID 00:23:F8:9D:AD:11 (WLAN_B5) to 00:23:F8:9D:AD:11 (WLAN_B5)
Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> Policy set 'Auto
WLAN_B5' (wlan0) as default for IPv4 routing and DNS.
Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> Activation (wlan0)
successful, device activated.
Aug 14 13:41:39 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 5 of 5 (IP Configure Commit) complete.
Aug 14 13:41:39 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.nm_dispatcher' (using servicehelper)
Aug 14 13:41:39 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.nm_dispatcher'
Aug 14 13:41:46 stt300 kernel: [ 179.600114] wlan0: no IPv6 routers present
Aug 14 13:43:57 stt300 anacron[2444]: Anacron 2.3 started on 2011-08-14
Aug 14 13:43:57 stt300 anacron[2444]: Normal exit (0 jobs run)
Aug 14 13:44:34 stt300 AptDaemon: INFO: Quiting due to inactivity
Aug 14 13:44:34 stt300 AptDaemon: INFO: Shutdown was requested
Aug 14 13:50:19 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 8 -> 3 (reason 39)
Aug 14 13:50:19 stt300 NetworkManager[1181]: <info> (wlan0):
deactivating device (reason: 39).
Aug 14 13:50:19 stt300 NetworkManager[1181]: <info> (wlan0): canceled
DHCP transaction, DHCP client pid 2175
Aug 14 13:50:19 stt300 kernel: [ 692.402985] ieee80211 phy0:
wl_ops_bss_info_changed: qos enabled: false (implement)
Aug 14 13:50:19 stt300 kernel: [ 692.403004] ieee80211 phy0: brcmsmac:
wl_ops_bss_info_changed: disassociated
Aug 14 13:50:19 stt300 kernel: [ 692.403020] ieee80211 phy0:
wl_ops_bss_info_changed: arp filtering: enabled false, count 1 (implement)
Aug 14 13:50:19 stt300 kernel: [ 692.403031] wlan0: deauthenticating
from 00:23:f8:9d:ad:11 by local choice (reason=3)
Aug 14 13:50:19 stt300 kernel: [ 692.452098] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: true (implement)
Aug 14 13:50:21 stt300 kernel: [ 693.764138] cfg80211: Calling CRDA to
update world regulatory domain
Aug 14 13:50:21 stt300 avahi-daemon[1269]: Withdrawing address record
for 192.168.0.155 on wlan0.
Aug 14 13:50:21 stt300 wpa_supplicant[1204]: CTRL-EVENT-DISCONNECTED
bssid=00:00:00:00:00:00 reason=0
Aug 14 13:50:21 stt300 avahi-daemon[1269]: Leaving mDNS multicast group
on interface wlan0.IPv4 with address 192.168.0.155.
Aug 14 13:50:21 stt300 avahi-daemon[1269]: Interface wlan0.IPv4 no
longer relevant for mDNS.
Aug 14 13:50:21 stt300 dbus[1166]: [system] Activating service
name='org.freedesktop.nm_dispatcher' (using servicehelper)
Aug 14 13:50:21 stt300 kernel: [ 693.796897] cfg80211: World regulatory
domain updated:
Aug 14 13:50:21 stt300 kernel: [ 693.796908] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:50:21 stt300 kernel: [ 693.796918] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.796928] cfg80211: (2457000 KHz
- 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.796937] cfg80211: (2474000 KHz
- 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.796946] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.796955] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.796996] cfg80211: Calling CRDA for
country: EU
Aug 14 13:50:21 stt300 dbus[1166]: [system] Successfully activated
service 'org.freedesktop.nm_dispatcher'
Aug 14 13:50:21 stt300 kernel: [ 693.831233] cfg80211: Regulatory
domain changed to country: EU
Aug 14 13:50:21 stt300 kernel: [ 693.831243] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:50:21 stt300 kernel: [ 693.831253] cfg80211: (2402000 KHz
- 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.831262] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.831271] cfg80211: (5250000 KHz
- 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:50:21 stt300 kernel: [ 693.831280] cfg80211: (5490000 KHz
- 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Aug 14 13:50:39 stt300 avahi-daemon[1269]: Interface wlan0.IPv6 no
longer relevant for mDNS.
Aug 14 13:50:39 stt300 avahi-daemon[1269]: Leaving mDNS multicast group
on interface wlan0.IPv6 with address fe80::ae81:12ff:fe34:6963.
Aug 14 13:50:39 stt300 avahi-daemon[1269]: Withdrawing address record
for fe80::ae81:12ff:fe34:6963 on wlan0.
Aug 14 13:50:39 stt300 avahi-daemon[1269]: Withdrawing workstation
service for wlan0.
Aug 14 13:50:39 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
devices removed (path:
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0)
Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> (wlan0): now unmanaged
Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 3 -> 1 (reason 36)
Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> (wlan0): cleaning up...
Aug 14 13:50:39 stt300 NetworkManager[1181]: <info> radio killswitch
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill1
disappeared
Aug 14 13:50:39 stt300 kernel: [ 712.176213] brcmsmac 0000:02:00.0: PCI
INT A disabled
Aug 14 13:50:39 stt300 wpa_supplicant[1204]: Could not read interface
wlan0 flags: No such device
Aug 14 13:50:50 stt300 kernel: [ 723.594513] cfg80211: Calling CRDA to
update world regulatory domain
Aug 14 13:50:50 stt300 kernel: [ 723.610205] brcmutil: module is from
the staging directory, the quality is unknown, you have been warned.
Aug 14 13:50:50 stt300 kernel: [ 723.613763] brcmsmac: module is from
the staging directory, the quality is unknown, you have been warned.
Aug 14 13:50:50 stt300 kernel: [ 723.619364] cfg80211: World regulatory
domain updated:
Aug 14 13:50:50 stt300 kernel: [ 723.619374] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:50:50 stt300 kernel: [ 723.619385] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:50 stt300 kernel: [ 723.619394] cfg80211: (2457000 KHz
- 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:50 stt300 kernel: [ 723.619403] cfg80211: (2474000 KHz
- 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:50 stt300 kernel: [ 723.619412] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:50 stt300 kernel: [ 723.619421] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:50 stt300 kernel: [ 723.626928] brcmsmac 0000:02:00.0: bus
2 slot 0 func 0 irq 17
Aug 14 13:50:50 stt300 kernel: [ 723.626964] brcmsmac 0000:02:00.0: PCI
INT A -> GSI 17 (level, low) -> IRQ 17
Aug 14 13:50:50 stt300 kernel: [ 723.626985] brcmsmac 0000:02:00.0:
setting latency timer to 64
Aug 14 13:50:50 stt300 kernel: [ 723.655812] ieee80211 phy0: Selected
rate control algorithm 'minstrel_ht'
Aug 14 13:50:50 stt300 kernel: [ 723.658781] cfg80211: Calling CRDA for
country: US
Aug 14 13:50:50 stt300 NetworkManager[1181]: <info> found WiFi radio
killswitch rfkill2 (at
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill2) (driver
<unknown>)
Aug 14 13:50:51 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
devices added (path:
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface: wlan0)
Aug 14 13:50:51 stt300 NetworkManager[1181]: SCPlugin-Ifupdown:
device added (path:
/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/wlan0, iface:
wlan0): no ifupdown configuration found.
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): driver
supports SSID scans (scan_capa 0x01).
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): new 802.11
WiFi device (driver: 'brcmsmac' ifindex: 4)
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): exported as
/org/freedesktop/NetworkManager/Devices/2
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): now managed
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 1 -> 2 (reason 2)
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): bringing up
device.
Aug 14 13:50:51 stt300 kernel: [ 723.708363] cfg80211: Regulatory
domain changed to country: US
Aug 14 13:50:51 stt300 kernel: [ 723.708372] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:50:51 stt300 kernel: [ 723.708381] cfg80211: (2402000 KHz
- 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.708390] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.708399] cfg80211: (5250000 KHz
- 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.708407] cfg80211: (5490000 KHz
- 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.708416] cfg80211: (5650000 KHz
- 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.708424] cfg80211: (5735000 KHz
- 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.708453] cfg80211: Calling CRDA for
country: EU
Aug 14 13:50:51 stt300 kernel: [ 723.724639] cfg80211: Regulatory
domain changed to country: EU
Aug 14 13:50:51 stt300 kernel: [ 723.724648] cfg80211: (start_freq
- end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Aug 14 13:50:51 stt300 kernel: [ 723.724657] cfg80211: (2402000 KHz
- 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.724665] cfg80211: (5170000 KHz
- 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.724673] cfg80211: (5250000 KHz
- 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.724681] cfg80211: (5490000 KHz
- 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Aug 14 13:50:51 stt300 kernel: [ 723.747941] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: true (implement)
Aug 14 13:50:51 stt300 kernel: [ 723.747967] ieee80211 phy0:
wl_ops_config: change monitor mode: false (implement)
Aug 14 13:50:51 stt300 kernel: [ 723.747976] ieee80211 phy0:
wl_ops_config: change power-save mode: false (implement)
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): preparing
device.
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0):
deactivating device (reason: 2).
Aug 14 13:50:51 stt300 kernel: [ 723.748827] ieee80211 phy0:
wl_ops_bss_info_changed: qos enabled: false (implement)
Aug 14 13:50:51 stt300 kernel: [ 723.749535] ADDRCONF(NETDEV_UP):
wlan0: link is not ready
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
interface state: starting -> ready
Aug 14 13:50:51 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 2 -> 3 (reason 42)
Aug 14 13:50:51 stt300 kernel: [ 723.797297] ieee80211 phy0:
wl_ops_bss_info_changed: BSS idle: false (implement)
Aug 14 13:50:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
starting connection 'Auto WLAN_B5'
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 3 -> 4 (reason 0)
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): access point 'Auto WLAN_B5' has security, but secrets
are required.
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:51:10 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:51:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:36 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:51:36 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:51:36 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): asking for new secrets
Aug 14 13:51:37 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:38 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:51:38 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:51:39 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:40 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:41 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:42 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:43 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:44 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:45 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:46 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:47 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:48 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:49 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:50 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:52 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:54 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:55 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:56 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:57 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:58 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:51:59 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:51:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:51:59 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:00 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:01 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:02 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:03 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:04 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:52:04 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:52:04 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): asking for new secrets
Aug 14 13:52:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:04 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:05 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:52:06 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:52:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:07 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:08 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:09 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:10 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:11 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:12 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:13 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:14 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:15 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:16 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:17 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:18 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:19 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:20 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:21 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:22 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:23 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:24 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:25 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:26 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:27 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:28 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:29 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:30 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:31 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:32 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:52:32 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 6 (reason 0)
Aug 14 13:52:32 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): asking for new secrets
Aug 14 13:52:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:32 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:33 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) scheduled...
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) started...
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 6 -> 4 (reason 0)
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) scheduled...
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 1 of 5 (Device Prepare) complete.
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) starting...
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 4 -> 5 (reason 0)
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation
(wlan0/wireless): connection 'Auto WLAN_B5' has security, and secrets
exist. No new secrets needed.
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added 'ssid'
value 'WLAN_B5'
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added
'scan_ssid' value '1'
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added
'key_mgmt' value 'WPA-PSK'
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: added 'psk'
value '<omitted>'
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Activation (wlan0)
Stage 2 of 5 (Device Configure) complete.
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> Config: set
interface ap_scan to 1
Aug 14 13:52:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:34 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:35 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:36 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:37 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:37 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:38 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:38 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:39 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:39 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:40 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:40 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:41 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:41 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:42 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:42 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:43 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:43 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:44 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:44 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:45 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:45 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:46 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:46 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:47 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:47 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:48 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:48 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:49 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:49 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:50 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:50 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:51 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:51 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:52 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:52 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:53 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:53 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:54 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:54 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:55 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:55 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:56 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:56 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:57 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:57 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:58 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:52:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: inactive -> scanning
Aug 14 13:52:58 stt300 NetworkManager[1181]: <info> (wlan0): supplicant
connection state: scanning -> inactive
Aug 14 13:52:59 stt300 NetworkManager[1181]: <warn> Activation
(wlan0/wireless): association took too long.
Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 5 -> 9 (reason 7)
Aug 14 13:52:59 stt300 NetworkManager[1181]: <warn> Activation (wlan0)
failed for access point (WLAN_B5)
Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> Marking connection
'Auto WLAN_B5' invalid.
Aug 14 13:52:59 stt300 NetworkManager[1181]: <warn> Activation (wlan0)
failed.
Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> (wlan0): device
state change: 9 -> 3 (reason 0)
Aug 14 13:52:59 stt300 NetworkManager[1181]: <info> (wlan0):
deactivating device (reason: 0).
Aug 14 13:52:59 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:00 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:01 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:02 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:03 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:04 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:05 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:06 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:07 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:08 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:09 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:10 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:11 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:12 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:13 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:14 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:15 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:16 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:17 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:18 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:19 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:20 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:21 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:22 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:23 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:24 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:25 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:26 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:27 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:28 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:29 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:30 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:31 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:32 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:33 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:34 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:35 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
Aug 14 13:53:36 stt300 wpa_supplicant[1204]: Failed to initiate AP scan.
next prev parent reply other threads:[~2011-08-16 11:36 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-14 12:16 brcmsmac driver only works when sitting next to the AP Camaleón
2011-08-16 11:36 ` Roland Vossen [this message]
2011-08-16 15:40 ` Dan Williams
2011-08-17 10:39 ` Roland Vossen
2011-08-18 8:07 ` Roland Vossen
2011-08-19 14:32 ` Roland Vossen
2011-08-19 15:21 ` Camaleón
2011-08-21 21:43 ` Camaleón
2011-08-22 10:03 ` Roland Vossen
2011-08-22 11:27 ` Camaleón
2011-08-22 12:57 ` Roland Vossen
2011-08-22 13:28 ` Camaleón
2011-08-22 13:55 ` Roland Vossen
2011-08-22 14:27 ` Camaleón
2011-08-23 8:41 ` Roland Vossen
2011-08-23 8:59 ` Camaleón
2011-08-23 9:27 ` Roland Vossen
2011-08-23 9:53 ` Camaleón
2011-08-23 10:38 ` Roland Vossen
2011-08-23 10:53 ` Camaleón
2011-08-23 11:23 ` Roland Vossen
2011-08-23 14:06 ` Camaleón
2011-08-23 14:18 ` Roland Vossen
2011-08-23 14:48 ` Camaleón
2011-08-23 14:58 ` Roland Vossen
2011-08-23 15:27 ` Camaleón
2011-08-23 17:37 ` Roland Vossen
2011-08-23 18:01 ` Camaleón
2011-08-22 14:15 ` Roland Vossen
2011-08-22 14:28 ` Camaleón
2011-08-22 16:37 ` Dan Williams
2011-08-19 20:47 ` Dan Williams
2011-08-22 6:52 ` Roland Vossen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E4A5641.4020604@broadcom.com \
--to=rvossen@broadcom.com \
--cc=arend@broadcom.com \
--cc=brudley@broadcom.com \
--cc=devel@driverdev.osuosl.org \
--cc=henryp@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
--cc=networkmanager-list@gnome.org \
--cc=noelamac@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.