From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Denis Girard Date: Wed, 17 Aug 2011 07:59:42 +0000 Subject: Re: [lm-sensors] Alix 2D2 Message-Id: <4E4B74EE.50100@sysnux.pf> List-Id: References: <4E4A9BEE.5030108@sysnux.pf> In-Reply-To: <4E4A9BEE.5030108@sysnux.pf> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Le 16/08/2011 20:24, Guenter Roeck a =E9crit : > Looking into the i2c bus driver code, it was recently converted into a pl= atform driver. > The supporting mfd driver would be cs5535-mfd. That might be one possible= reason > for your problem, though it happened less than a year ago. Thanks Guenter, that was my problem (cs5535_mfd missing); now it is working again: [admin@ix100 ~]$ sensors lm86-i2c-0-4c Adapter: CS5535 ACB0 temp1: +43.0=B0C (low =3D +0.0=B0C, high =3D +70.0=B0C) (crit =3D +85.0=B0C, hyst =3D +75.0=B0C) temp2: +49.8=B0C (low =3D +0.0=B0C, high =3D +70.0=B0C) (crit =3D +85.0=B0C, hyst =3D +75.0=B0C) Shouldn't scx200_acb depend on cs5535_mfd in the kernel configuration options ? Thanks, - --=20 Jean-Denis Girard SysNux Syst=E8mes Linux en Polyn=E9sie fran=E7aise http://www.sysnux.pf/ T=E9l: +689 50 10 40 / GSM: +689 79 75 27 -----BEGIN PGP SIGNATURE----- iEYEARECAAYFAk5LdO4ACgkQuu7Rv+oOo/hcEwCgi4JMDKMbWTHEgqasEVMJTM4p 4EUAn0U1hNskUxTnBcoUJ7OH/amwx70u =3D/tZA -----END PGP SIGNATURE----- _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors