From: "Stefan G. Weichinger" <lists@xunil.at>
To: lists@xunil.at
Cc: "Mathias Burén" <mathias.buren@gmail.com>,
"linux-raid@vger.kernel.org" <linux-raid@vger.kernel.org>,
robin.hill47@ntlworld.com
Subject: Re: (solved) RAID1, changed disk, 2nd has errors ...
Date: Mon, 29 Aug 2011 16:34:48 +0200 [thread overview]
Message-ID: <4E5BA388.3000405@xunil.at> (raw)
In-Reply-To: <4E5B4D12.5060604@xunil.at>
Am 29.08.2011 10:25, schrieb Stefan G. Weichinger:
> I get
>
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
> - 0
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
> Offline - 0
>
>
> Sounds good to me! Right?
>
> So now I could re-add /dev/sdb4 to retry syncing that array, correct?
Did that.
I failed/removed/re-added /dev/sdb4 and waited for some hours of resyncing.
Now /dev/md2 is in sync again, still with no bad sectors in SMART
(attached, @Mathias ;-))
thanks to Robin and Mathias for your feedback, it helped me to get the
picture and chose the next steps!
For now I let the arrays as they are and wait for the second new hdd.
As soon as I have it here I will swap /dev/sdb as well.
(a new server with maybe RAID6 is soon to come there ...)
Thanks, Stefan
----
# smartctl -a /dev/sda
smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12 family
Device Model: ST31000528AS
Serial Number: 9VP3BSEV
Firmware Version: CC38
User Capacity: 1.000.204.886.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Aug 29 16:31:35 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 178) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always
- 134791791
3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 50
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always
- 111650379
9 Power_On_Hours 0x0032 085 085 000 Old_age Always
- 13433
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 25
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 082 082 000 Old_age Always
- 18
188 Command_Timeout 0x0032 100 099 000 Old_age Always
- 2
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 067 060 045 Old_age Always
- 33 (Min/Max 27/36)
194 Temperature_Celsius 0x0022 033 040 000 Old_age Always
- 33 (0 15 0 0)
195 Hardware_ECC_Recovered 0x001a 048 024 000 Old_age Always
- 134791791
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 255980050855093
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 2678846567
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 4015371061
SMART Error Log Version: 1
ATA Error Count: 18 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 18 occurred at disk power-on lifetime: 13357 hours (556 days + 13
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 01:28:56.212 READ DMA EXT
27 00 00 00 00 00 e0 00 01:28:56.211 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:28:56.191 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:28:56.175 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 01:28:56.151 READ NATIVE MAX ADDRESS EXT
Error 17 occurred at disk power-on lifetime: 13357 hours (556 days + 13
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 01:28:53.001 READ DMA EXT
27 00 00 00 00 00 e0 00 01:28:53.000 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:28:52.980 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:28:52.961 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 01:28:52.940 READ NATIVE MAX ADDRESS EXT
Error 16 occurred at disk power-on lifetime: 13357 hours (556 days + 13
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 01:28:49.790 READ DMA EXT
27 00 00 00 00 00 e0 00 01:28:49.789 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:28:49.749 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:28:49.739 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 01:28:49.719 READ NATIVE MAX ADDRESS EXT
Error 15 occurred at disk power-on lifetime: 13357 hours (556 days + 13
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 01:28:46.580 READ DMA EXT
27 00 00 00 00 00 e0 00 01:28:46.579 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:28:46.559 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:28:46.542 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 01:28:46.519 READ NATIVE MAX ADDRESS EXT
Error 14 occurred at disk power-on lifetime: 13357 hours (556 days + 13
hours)
When the command that caused the error occurred, the device was active
or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 01:28:43.379 READ DMA EXT
27 00 00 00 00 00 e0 00 01:28:43.378 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:28:43.358 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 01:28:43.345 SET FEATURES [Set transfer
mode]
27 00 00 00 00 00 e0 00 01:28:43.318 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 13429
-
# 2 Short offline Completed without error 00% 13405
-
# 3 Short offline Completed without error 00% 13381
-
# 4 Extended offline Completed without error 00% 13375
-
# 5 Short offline Completed without error 00% 13357
-
# 6 Short offline Completed without error 00% 13333
-
# 7 Short offline Completed without error 00% 13310
-
# 8 Short offline Completed without error 00% 13286
-
# 9 Short offline Completed without error 00% 13261
-
#10 Short offline Completed without error 00% 13237
-
#11 Short offline Completed without error 00% 13213
-
#12 Extended offline Completed without error 00% 13207
-
#13 Short offline Completed without error 00% 13189
-
#14 Short offline Completed without error 00% 13164
-
#15 Short offline Completed without error 00% 13162
-
#16 Short offline Completed without error 00% 13138
-
#17 Short offline Completed without error 00% 13114
-
#18 Short offline Completed without error 00% 13090
-
#19 Short offline Completed without error 00% 13066
-
#20 Extended offline Completed without error 00% 13060
-
#21 Short offline Completed without error 00% 13042
-
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
next prev parent reply other threads:[~2011-08-29 14:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-26 11:46 RAID1, changed disk, 2nd has errors Stefan G. Weichinger
2011-08-26 12:01 ` Mathias Burén
2011-08-26 12:19 ` Stefan G. Weichinger
2011-08-26 12:44 ` Stefan G. Weichinger
2011-08-26 20:00 ` Mathias Burén
2011-08-26 22:12 ` Stefan G. Weichinger
2011-08-26 12:56 ` Robin Hill
2011-08-26 13:51 ` Stefan G. Weichinger
2011-08-26 14:08 ` Robin Hill
2011-08-26 15:41 ` Stefan G. Weichinger
2011-08-29 7:02 ` Stefan G. Weichinger
2011-08-29 7:45 ` Stefan G. Weichinger
2011-08-29 7:51 ` Mathias Burén
2011-08-29 8:00 ` Stefan G. Weichinger
2011-08-29 8:25 ` Stefan G. Weichinger
2011-08-29 14:34 ` Stefan G. Weichinger [this message]
2011-08-29 23:40 ` (solved) " Mathias Burén
2011-08-30 12:14 ` Stefan G. Weichinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E5BA388.3000405@xunil.at \
--to=lists@xunil.at \
--cc=linux-raid@vger.kernel.org \
--cc=mathias.buren@gmail.com \
--cc=robin.hill47@ntlworld.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.