From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Tue, 30 Aug 2011 14:09:09 +0200
Subject: [U-Boot] Debugging u-boot
In-Reply-To: <659ACFBD-2B5D-4F28-89BF-5473D90ADFA5@gmail.com>
References: <659ACFBD-2B5D-4F28-89BF-5473D90ADFA5@gmail.com>
Message-ID: <4E5CD2E5.5060806@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 08/30/2011 01:59 PM, Mirko Banchi wrote:
> Hi all, could someone write briefly the steps needed to debug u-boot
> with BDI2000? I can-t find documentation about it. On-line docs
> specify only how to proceed with gdb after that the host bdi is up
> and configured.

http://www.denx.de/wiki/view/DULG/DebuggingUBoot

To set up the BDI2000 please refer to the Abatron manual.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================