Re: Hello world

From: Shakil <plumbedzero.c@gmail.com>
To: Renaud Barbier <renaud.barbier@ge.com>
Cc: barebox@lists.infradead.org
Subject: Re: Hello world
Date: Fri, 02 Sep 2011 08:56:25 -0700	[thread overview]
Message-ID: <4E60FCA9.4010002@gmail.com> (raw)
In-Reply-To: <4E60B9BC.2040604@ge.com>

[-- Attachment #1.1: Type: text/plain, Size: 2832 bytes --]

Thanks Renaud, for the instruction. I will try this over weekend and 
will get back to you if I am having any problem.
Appreciate your response.

Regards
Shakil

On 9/2/2011 4:10 AM, Renaud Barbier wrote:
> Hello Plumbedzero,
> Here is what I did:
>
> make omap3530_beagle_defconfig
> make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi-
>
> I use a 32MB SD card formatted for FAT.
>
> As per documentation,
> I copied the file MLO, barebox.bin as u-boot.bin and normal.scr as 
> boot.scr (not used yet) on the SD card.
>
>
>
> Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
> Reading boot sector
> Loading u-boot.bin from mmc
>
>
> barebox 2011.08.0 (Aug 31 2011 - 14:07:34)
>
> Board: Texas Instrument's Beagle
> I2C probe
> i2c-omap@i2c-omap0: bus 0 rev3.12 at 100 kHz
> ehci@ehci0: USB EHCI 1.00
> NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 
> 1,8V 16-bit)
> Malloc space: 0x80c00000 -> 0x81000000 (size  4 MB)
> Stack space : 0x80bf8000 -> 0x80c00000 (size 32 kB)
> Open /dev/env0 No such file or directory
> no valid environment found on /dev/env0. Using default environment
> running /env/bin/init...
> sh: No such file or directory
>
> Hit any key to stop autoboot: Usage: timeout [OPTION]... <timeout>
> Wait <timeout> seconds for a timeout. Return 1 if the user intervented
> or 0 if a timeout occured
>   -a  interrupt on any key
>   -c  interrupt on ctrl-c
>   -r  interrupt on return
>   -s  silent mode
>
>
>
> On 01/09/11 15:08, plumbedZero c wrote:
>> Hi Renaud,
>>
>> Sorry for mailing you but I couldn't stop myself writing to you. I 
>> have struggled a lot to compile barebox for beagleboard and it 
>> compiled, however I am not able to load it as I don't get any boot 
>> prompt after loading it to beagle board.
>>
>> Can you share the process of compilation and if configuration file 
>> required.
>>
>> Also I would be interested in the Hello World program. In case if you 
>> are able to make it then let me know as well. Hope you dont mind my 
>> multiple requests.
>>
>>
>> Thanks
>>
>> On Wed, Aug 31, 2011 at 8:50 AM, Renaud Barbier 
>> <renaud.barbier@ge.com <mailto:renaud.barbier@ge.com>> wrote:
>>
>>     Hello,
>>     I just loaded barebox on a beagle board and I am experimenting
>>     with it.
>>
>>     I was wondering how I could load and execute a simple hello world
>>     program.
>>
>>     It looks like I would have to use a module.
>>
>>     Could somebody give me some pointers?
>>
>>     Cheers,
>>     Renaud
>>
>>     _______________________________________________
>>     barebox mailing list
>>     barebox@lists.infradead.org <mailto:barebox@lists.infradead.org>
>>     http://lists.infradead.org/mailman/listinfo/barebox
>>
>>
>
> -- 
> Renaud Barbier
> 14, Links Place
> 3/2 great Michael House
> Edinburgh, EH67EN
> Tel: +44 131 561 3532

[-- Attachment #1.2: Type: text/html, Size: 4755 bytes --]

[-- Attachment #2: Type: text/plain, Size: 149 bytes --]

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox