From: sbabic@denx.de (Stefano Babic)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: mxs: Add initial support for DENX MX28
Date: Tue, 06 Sep 2011 11:13:02 +0200 [thread overview]
Message-ID: <4E65E41E.9000108@denx.de> (raw)
In-Reply-To: <20110906083926.GE28816@pengutronix.de>
On 09/06/2011 10:39 AM, Uwe Kleine-K?nig wrote:
> Hello Stefano,
>
Hi Uwe,
> Can you please Cc: kernel at pengutronix for your next mxs patches
> (additional to or instead of s.hauer)? You increase your chances to get
> a reply when Sascha is on vacation.
Yes, thanks ! I am not aware of it, I will do it for V2.
>> + /*
>> + * OCOTP only stores the last 4 octets for each mac address,
>> + * so hard-code DENX OUI (C0:E5:4E) here.
>> + */
>> + for (i = 0; i < 2; i++) {
>> + val = ocotp[i * 4];
>> + mx28_fec_pdata[i].mac[0] = 0xC0;
>> + mx28_fec_pdata[i].mac[1] = 0xE5;
>> + mx28_fec_pdata[i].mac[2] = 0x4E;
>> + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
>> + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
>> + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
>> + }
>> +
>> + return 0;
>> +
>> +error:
> As there is only a single place that can produce an error, I'd handle it
> directly there. That is, move the printk and return into the body of the
> if (!ocotp) above.
You are right, I fix in V2.
>> +
> please remove this empty line.
Ok
>> +
>> + if (m28evk_fec_get_mac())
>> + pr_warn("%s: failed on fec mac setup\n", __func__);
> I'd suggest to only register the fecs if get_mac() succeeded?
I do not know - if m28evk_fec_get_mac fails (ok, it *should* not fail..)
it should be still possible to add the MAC address via ifconfig (with hw
ethar <mac>, I mean) if the device is present, at least this is what I
supposed in error case.
> Also you might want to skip that pr_warn as m28evk_fec_get_mac already
> prints an error on failure.
Right, I'll do it
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
next prev parent reply other threads:[~2011-09-06 9:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-29 7:50 [PATCH] ARM: mxs: Add initial support for DENX MX28 Stefano Babic
2011-09-06 8:39 ` Uwe Kleine-König
2011-09-06 8:46 ` Wolfram Sang
2011-09-06 9:14 ` Stefano Babic
2011-09-06 9:10 ` Lothar Waßmann
2011-09-06 13:25 ` Shawn Guo
2011-09-07 6:28 ` Stefano Babic
2011-09-06 9:13 ` Stefano Babic [this message]
2011-09-07 6:45 ` [PATCH V2] " Stefano Babic
2011-09-07 9:30 ` Wolfram Sang
2011-09-07 9:37 ` Stefano Babic
2011-09-07 23:45 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E65E41E.9000108@denx.de \
--to=sbabic@denx.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.