From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <4E69FB73.4040207@domain.hid>
Date: Fri, 09 Sep 2011 13:41:39 +0200
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <4E68226E.2000208@domain.hid>
	<CAOiXNkARu4YOd+K9YMqXbvQhUYEh38fVyNQi-mthMYjQe7mCYA@mail.gmail.com>
	<4E68873B.6080204@domain.hid> <4E698924.70406@domain.hid>
In-Reply-To: <4E698924.70406@domain.hid>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] PWM generation with GPIO
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/options/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Bob Feretich <bob.feretich@domain.hid>
Cc: Xenomai help <xenomai@xenomai.org>

On 09/09/2011 05:33 AM, Bob Feretich wrote:
> The advantage of using a hardware PWM timer (like OMAP3 GPTimer8-11) is 
> that there is no interrupt load on the system.
> (The PWM signals are completely generated by the hardware.)

And you get no jitter.

-- 
                                                                Gilles.