All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <archit@ti.com>
To: "Valkeinen, Tomi" <tomi.valkeinen@ti.com>
Cc: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
	Hunyue Yau <hyau@mvista.com>
Subject: Re: [PATCHv2 2/4] OMAP: 2420SDP: Port the display driver to new DSS2
Date: Mon, 12 Sep 2011 17:18:00 +0530	[thread overview]
Message-ID: <4E6DF170.20303@ti.com> (raw)
In-Reply-To: <1315826494-27993-3-git-send-email-tomi.valkeinen@ti.com>

On Monday 12 September 2011 04:51 PM, Valkeinen, Tomi wrote:
> Port the old omapfb panel driver for 2420SDP to DSS2.

Minor comment: The subject and commit message say 2420SDP, but patch 
says 2430SDP.

I'll try to find the name of the panel.

Archit

>
> Cc: Hunyue Yau<hyau@mvista.com>
> Signed-off-by: Tomi Valkeinen<tomi.valkeinen@ti.com>
> ---
>   drivers/video/omap/Makefile                      |    2 -
>   drivers/video/omap/lcd_2430sdp.c                 |  203 ----------------------
>   drivers/video/omap2/displays/panel-generic-dpi.c |   21 +++
>   3 files changed, 21 insertions(+), 205 deletions(-)
>   delete mode 100644 drivers/video/omap/lcd_2430sdp.c
>
> diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
> index 37c03c2..43eb64a 100644
> --- a/drivers/video/omap/Makefile
> +++ b/drivers/video/omap/Makefile
> @@ -27,8 +27,6 @@ objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
>   objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
>
>   objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
> -objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
> -objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
>   objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
>   objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
>
> diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
> deleted file mode 100644
> index e3eccc9..0000000
> --- a/drivers/video/omap/lcd_2430sdp.c
> +++ /dev/null
> @@ -1,203 +0,0 @@
> -/*
> - * LCD panel support for the TI 2430SDP board
> - *
> - * Copyright (C) 2007 MontaVista
> - * Author: Hunyue Yau<hyau@mvista.com>
> - *
> - * Derived from drivers/video/omap/lcd-apollon.c
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License as published by the
> - * Free Software Foundation; either version 2 of the License, or (at your
> - * option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful, but
> - * WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> - * General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License along
> - * with this program; if not, write to the Free Software Foundation, Inc.,
> - * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
> - */
> -
> -#include<linux/module.h>
> -#include<linux/platform_device.h>
> -#include<linux/delay.h>
> -#include<linux/gpio.h>
> -#include<linux/i2c/twl.h>
> -
> -#include<plat/mux.h>
> -#include<asm/mach-types.h>
> -
> -#include "omapfb.h"
> -
> -#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
> -#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
> -#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	24
> -#define SDP3430_LCD_PANEL_ENABLE_GPIO		28
> -
> -static unsigned backlight_gpio;
> -static unsigned enable_gpio;
> -
> -#define LCD_PIXCLOCK_MAX		5400 /* freq 5.4 MHz */
> -#define PM_RECEIVER             TWL4030_MODULE_PM_RECEIVER
> -#define ENABLE_VAUX2_DEDICATED  0x09
> -#define ENABLE_VAUX2_DEV_GRP    0x20
> -#define ENABLE_VAUX3_DEDICATED	0x03
> -#define ENABLE_VAUX3_DEV_GRP	0x20
> -
> -#define ENABLE_VPLL2_DEDICATED          0x05
> -#define ENABLE_VPLL2_DEV_GRP            0xE0
> -#define TWL4030_VPLL2_DEV_GRP           0x33
> -#define TWL4030_VPLL2_DEDICATED         0x36
> -
> -#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
> -
> -
> -static int sdp2430_panel_init(struct lcd_panel *panel,
> -				struct omapfb_device *fbdev)
> -{
> -	if (machine_is_omap_3430sdp()) {
> -		enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
> -		backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
> -	} else {
> -		enable_gpio    = SDP2430_LCD_PANEL_ENABLE_GPIO;
> -		backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
> -	}
> -
> -	gpio_request(enable_gpio, "LCD enable");	/* LCD panel */
> -	gpio_request(backlight_gpio, "LCD bl");		/* LCD backlight */
> -	gpio_direction_output(enable_gpio, 0);
> -	gpio_direction_output(backlight_gpio, 0);
> -
> -	return 0;
> -}
> -
> -static void sdp2430_panel_cleanup(struct lcd_panel *panel)
> -{
> -	gpio_free(backlight_gpio);
> -	gpio_free(enable_gpio);
> -}
> -
> -static int sdp2430_panel_enable(struct lcd_panel *panel)
> -{
> -	u8 ded_val, ded_reg;
> -	u8 grp_val, grp_reg;
> -
> -	if (machine_is_omap_3430sdp()) {
> -		ded_reg = TWL4030_VAUX3_DEDICATED;
> -		ded_val = ENABLE_VAUX3_DEDICATED;
> -		grp_reg = TWL4030_VAUX3_DEV_GRP;
> -		grp_val = ENABLE_VAUX3_DEV_GRP;
> -
> -		if (omap_rev()>  OMAP3430_REV_ES1_0) {
> -			t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
> -					TWL4030_VPLL2_DEDICATED);
> -			t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
> -					TWL4030_VPLL2_DEV_GRP);
> -		}
> -	} else {
> -		ded_reg = TWL4030_VAUX2_DEDICATED;
> -		ded_val = ENABLE_VAUX2_DEDICATED;
> -		grp_reg = TWL4030_VAUX2_DEV_GRP;
> -		grp_val = ENABLE_VAUX2_DEV_GRP;
> -	}
> -
> -	gpio_set_value(enable_gpio, 1);
> -	gpio_set_value(backlight_gpio, 1);
> -
> -	if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
> -		return -EIO;
> -	if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
> -		return -EIO;
> -
> -	return 0;
> -}
> -
> -static void sdp2430_panel_disable(struct lcd_panel *panel)
> -{
> -	gpio_set_value(enable_gpio, 0);
> -	gpio_set_value(backlight_gpio, 0);
> -	if (omap_rev()>  OMAP3430_REV_ES1_0) {
> -		t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
> -		t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
> -		msleep(4);
> -	}
> -}
> -
> -static unsigned long sdp2430_panel_get_caps(struct lcd_panel *panel)
> -{
> -	return 0;
> -}
> -
> -struct lcd_panel sdp2430_panel = {
> -	.name		= "sdp2430",
> -	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
> -			  OMAP_LCDC_INV_HSYNC,
> -
> -	.bpp		= 16,
> -	.data_lines	= 16,
> -	.x_res		= 240,
> -	.y_res		= 320,
> -	.hsw		= 3,		/* hsync_len (4) - 1 */
> -	.hfp		= 3,		/* right_margin (4) - 1 */
> -	.hbp		= 39,		/* left_margin (40) - 1 */
> -	.vsw		= 1,		/* vsync_len (2) - 1 */
> -	.vfp		= 2,		/* lower_margin */
> -	.vbp		= 7,		/* upper_margin (8) - 1 */
> -
> -	.pixel_clock	= LCD_PIXCLOCK_MAX,
> -
> -	.init		= sdp2430_panel_init,
> -	.cleanup	= sdp2430_panel_cleanup,
> -	.enable		= sdp2430_panel_enable,
> -	.disable	= sdp2430_panel_disable,
> -	.get_caps	= sdp2430_panel_get_caps,
> -};
> -
> -static int sdp2430_panel_probe(struct platform_device *pdev)
> -{
> -	omapfb_register_panel(&sdp2430_panel);
> -	return 0;
> -}
> -
> -static int sdp2430_panel_remove(struct platform_device *pdev)
> -{
> -	return 0;
> -}
> -
> -static int sdp2430_panel_suspend(struct platform_device *pdev,
> -					pm_message_t mesg)
> -{
> -	return 0;
> -}
> -
> -static int sdp2430_panel_resume(struct platform_device *pdev)
> -{
> -	return 0;
> -}
> -
> -struct platform_driver sdp2430_panel_driver = {
> -	.probe		= sdp2430_panel_probe,
> -	.remove		= sdp2430_panel_remove,
> -	.suspend	= sdp2430_panel_suspend,
> -	.resume		= sdp2430_panel_resume,
> -	.driver		= {
> -		.name	= "sdp2430_lcd",
> -		.owner	= THIS_MODULE,
> -	},
> -};
> -
> -static int __init sdp2430_panel_drv_init(void)
> -{
> -	return platform_driver_register(&sdp2430_panel_driver);
> -}
> -
> -static void __exit sdp2430_panel_drv_exit(void)
> -{
> -	platform_driver_unregister(&sdp2430_panel_driver);
> -}
> -
> -module_init(sdp2430_panel_drv_init);
> -module_exit(sdp2430_panel_drv_exit);
> diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
> index b401304..0a4d340 100644
> --- a/drivers/video/omap2/displays/panel-generic-dpi.c
> +++ b/drivers/video/omap2/displays/panel-generic-dpi.c
> @@ -257,6 +257,27 @@ static struct panel_config generic_dpi_panels[] = {
>   		.power_off_delay	= 0,
>   		.name			= "innolux_at070tn83",
>   	},
> +
> +	/* Unknown panel used in OMAP 2430 SDP */
> +	{
> +		{
> +			.x_res		= 240,
> +			.y_res		= 320,
> +
> +			.pixel_clock	= 5400,
> +
> +			.hsw		= 3,
> +			.hfp		= 3,
> +			.hbp		= 39,
> +
> +			.vsw		= 1,
> +			.vfp		= 2,
> +			.vbp		= 7,
> +		},
> +		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> +						OMAP_DSS_LCD_IHS,
> +		.name			= "2430sdp",
> +	},
>   };
>
>   struct panel_drv_data {


  reply	other threads:[~2011-09-12 11:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-12 11:21 [PATCHv2 0/4] OMAP: DSS: porting old drivers to DSS2 (driver part) Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 1/4] OMAP: OMAPFB: Remove unused lcd drivers Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 2/4] OMAP: 2420SDP: Port the display driver to new DSS2 Tomi Valkeinen
2011-09-12 11:48   ` Archit Taneja [this message]
2011-09-12 11:57     ` Tomi Valkeinen
2011-09-12 12:15       ` Archit Taneja
2011-09-12 12:19         ` Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 3/4] OMAP: H4: " Tomi Valkeinen
2011-09-12 11:21 ` [PATCHv2 4/4] OMAP: Apollon: " Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E6DF170.20303@ti.com \
    --to=archit@ti.com \
    --cc=hyau@mvista.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.