From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option
Date: Tue, 13 Sep 2011 17:53:09 -0500 [thread overview]
Message-ID: <4E6FDED5.5080204@freescale.com> (raw)
In-Reply-To: <201109140041.30150.marek.vasut@gmail.com>
On 09/13/2011 05:41 PM, Marek Vasut wrote:
>> Any chance you could blow the NAND_MEMBLOCK_MARKER_RESERVE fuse? :-)
>
> No, they are one-time programable. Delivering a "damaged" chip isn't a good
> practice.
I'd call it "fixed" rather than "damaged" -- they did throw in that fuse
in case of "any defective ROM code in handling bad block marker byte
swapping", and the entire concept is defective.
But I agree that if you're delivering them to other developers, rather
than as part of a final product, they might want to make that choice
themselves. And who knows, blowing the fuse might expose other defects.
>> Otherwise, I guess you do need to scrub. Have you complained to
>> Freescale sales/support?
>
> In fact no. The BootROM is "broken" and I doubt they will be willing to do
> anything about it.
Probably not, but they should still hear about it, if only for the
chance they'll do it right next time.
-Scott
next prev parent reply other threads:[~2011-09-13 22:53 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 4:04 [U-Boot] [PATCH 0/5 V2] Random NAND fixes and improvements Marek Vasut
2011-09-12 4:04 ` [U-Boot] [PATCH 1/5] NAND: Really ignore bad blocks when scrubbing Marek Vasut
2011-09-27 18:54 ` Scott Wood
2011-09-12 4:04 ` [U-Boot] [PATCH 2/5] NAND: Add nand read.raw and write.raw commands Marek Vasut
2011-09-21 18:48 ` Scott Wood
2011-09-22 1:55 ` [U-Boot] [PATCH 2/5 V2] " Marek Vasut
2011-09-22 16:03 ` Scott Wood
2011-09-22 18:36 ` [U-Boot] [PATCH 2/5 V3] " Marek Vasut
2011-09-22 18:40 ` Scott Wood
2011-09-23 13:43 ` [U-Boot] [PATCH 2/5 V4] " Marek Vasut
2011-09-27 18:57 ` Scott Wood
2011-09-12 4:04 ` [U-Boot] [PATCH 3/5] NAND: Allow per-buffer allocation Marek Vasut
2011-09-21 18:50 ` Scott Wood
2011-09-21 19:49 ` Wolfgang Denk
2011-09-21 19:55 ` Scott Wood
2011-09-21 20:16 ` Wolfgang Denk
2011-09-22 1:34 ` Marek Vasut
2011-09-22 7:41 ` Stefano Babic
2011-09-22 8:51 ` Marek Vasut
2011-09-23 17:35 ` Scott Wood
2011-09-24 12:37 ` Marek Vasut
2011-09-26 18:33 ` Scott Wood
2011-09-26 18:49 ` Marek Vasut
2011-09-12 4:04 ` [U-Boot] [PATCH 4/5] NAND: Make page, erase, oob size available via cmd_nand Marek Vasut
2011-09-21 18:55 ` Scott Wood
2011-09-21 19:52 ` Wolfgang Denk
2011-09-22 1:57 ` [U-Boot] [PATCH 4/5 V2] " Marek Vasut
2011-09-27 19:01 ` Scott Wood
2011-09-27 19:38 ` Marek Vasut
2011-09-27 19:51 ` Scott Wood
2011-09-27 20:07 ` Marek Vasut
2011-09-27 20:53 ` Scott Wood
2011-09-27 21:04 ` Marek Vasut
2011-09-27 21:14 ` Scott Wood
2011-09-12 4:04 ` [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option Marek Vasut
2011-09-12 16:45 ` Mike Frysinger
2011-09-12 17:45 ` Marek Vasut
2011-09-12 18:06 ` Scott Wood
2011-09-12 18:24 ` Marek Vasut
2011-09-12 18:31 ` Scott Wood
2011-09-12 18:36 ` Marek Vasut
2011-09-12 19:19 ` Scott Wood
2011-09-12 19:28 ` Marek Vasut
2011-09-12 19:36 ` Scott Wood
2011-09-12 19:42 ` Marek Vasut
2011-09-12 23:24 ` Scott Wood
2011-09-13 1:02 ` Marek Vasut
2011-09-13 4:25 ` Wolfgang Denk
2011-09-13 4:36 ` Marek Vasut
2011-09-13 22:22 ` Scott Wood
2011-09-13 22:41 ` Marek Vasut
2011-09-13 22:53 ` Scott Wood [this message]
2011-09-12 18:37 ` Wolfgang Denk
2011-09-12 18:50 ` Marek Vasut
2011-09-12 20:33 ` Mike Frysinger
2011-09-12 22:59 ` Marek Vasut
2011-09-13 22:20 ` [U-Boot] [PATCH 5/5] NAND: Add -y option to nand scrub command Marek Vasut
2011-09-13 22:28 ` Mike Frysinger
2011-09-27 19:03 ` Scott Wood
-- strict thread matches above, loose matches on Subject: below --
2011-09-08 20:39 [U-Boot] [PATCH 0/5] Random NAND fixes and improvements Marek Vasut
2011-09-08 20:39 ` [U-Boot] [PATCH 5/5] NAND: Add scrub.quiet command option Marek Vasut
2011-09-09 15:39 ` Detlev Zundel
2011-09-10 20:54 ` Marek Vasut
2011-09-12 9:49 ` Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E6FDED5.5080204@freescale.com \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.