All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Lambrecht Jürgen" <J.Lambrecht@TELEVIC.com>
To: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: ubiattach error
Date: Fri, 23 Sep 2011 16:01:22 +0200	[thread overview]
Message-ID: <4E7C9132.4060606@televic.com> (raw)
In-Reply-To: <4E78A24E.7080000@televic.com>

On 09/20/2011 04:25 PM, Lambrecht Jürgen wrote:
>
> Hello,
>
> When I want to run 'ubiattach' I get this error:
>
> barebox:/dev erase nand0.root1.bb
> Skipping bad block at 0x08000000
> Skipping bad block at 0x08020000
> barebox:/dev ubiattach nand0.root1
>
first do 'ubiformat' in linux or flash an ubi image. Then you can attach 
to it.
Mark: you can only attach 1 mtd0

After a lot of reading and trial-and-error, now I understand ubi and ubifs.

Juergen
>
> UBI: attaching mtd0 to ubi0
> UBI: physical eraseblock size:   131072 bytes (128 KiB)
> UBI: logical eraseblock size:    129024 bytes
> UBI: smallest flash I/O unit:    2048
> UBI: sub-page size:              512
> UBI: VID header offset:          512 (aligned 512)
> UBI: data offset:                2048
> UBI: empty MTD device detected
> UBI: create volume table (copy #1)
> UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 0:512,
> written 0 bytes
> UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 1:512,
> written 0 bytes
> UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 2:512,
> written 0 bytes
> UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 3:512,
> written 0 bytes
> UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 4:512,
> written 0 bytes
> UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 5:512,
> written 0 bytes
> failed to attach: I/O error
> ------------------------------------------------------------------
> - I use a imx27, and our HW is based on the imx27pdk.
> - We use the BI-swap solution to work around the nand flash HW bug (2kB
> pages are load in 512 chunks, mangling the spare area) (so
> drivers/mtd/nand/nand_imx.c is patched).
> - I see UBI detects a sub-page size of 512B, what does that mean?
>    Because in the UBI menu config "drivers - mtd - NAND - select nand
> pagesize you want to support booting from", I must take '2048 byte page
> size'; with '512 byte and 2048 byte pagesize' selected the board does
> not boot.
> - I use LTIB from CVS (not the freescale one), that I have patched
> according to the imx28 BSP from freescale to support UBI
>
> Kind regards,
> Jürgen
>
> --
> Jürgen Lambrecht
> R&D Associate
> Tel: +32 (0)51 303045    Fax: +32 (0)51 310670
> http://www.televic-rail.com
> Televic Rail NV - Leo Bekaertlaan 1 - 8870 Izegem - Belgium
> Company number 0825.539.581 - RPR Kortrijk
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>


-- 
Jürgen Lambrecht
R&D Associate
Tel: +32 (0)51 303045    Fax: +32 (0)51 310670
http://www.televic-rail.com
Televic Rail NV - Leo Bekaertlaan 1 - 8870 Izegem - Belgium
Company number 0825.539.581 - RPR Kortrijk

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-09-23 14:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-20 14:25 ubiattach error Lambrecht Jürgen
2011-09-23 14:01 ` Lambrecht Jürgen [this message]
  -- strict thread matches above, loose matches on Subject: below --
2014-01-09 17:54 C J

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E7C9132.4060606@televic.com \
    --to=j.lambrecht@televic.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.