From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: doronc@siano-ms.com
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH 6/17]DVB:Siano drivers - Add support in various boards implemented with siano devices.
Date: Fri, 23 Sep 2011 19:24:13 -0300 [thread overview]
Message-ID: <4E7D070D.2030301@redhat.com> (raw)
In-Reply-To: <1316514673.5199.84.camel@Doron-Ubuntu>
Em 20-09-2011 07:31, Doron Cohen escreveu:
> Hi,
> This patch adds support in various boards implemented with Siano
> devices.
This one looks ok, except that it was mangled by your emailer.
>
> Thanks,
> Doron Cohen
>
>
>
> ------------------------------
>>From becf520ccaba483a80e242622b471d10bd74024e Mon Sep 17 00:00:00 2001
> From: Doron Cohen <doronc@siano-ms.com>
> Date: Mon, 19 Sep 2011 13:57:40 +0300
> Subject: [PATCH 09/21] Add support in various boards with SMS devices
>
> ---
> drivers/media/dvb/siano/sms-cards.c | 224
> ++++++++++++++++++++++++++++++-----
> 1 files changed, 195 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/media/dvb/siano/sms-cards.c
> b/drivers/media/dvb/siano/sms-cards.c
> index 00c6c5f..66b302e 100644
> --- a/drivers/media/dvb/siano/sms-cards.c
> +++ b/drivers/media/dvb/siano/sms-cards.c
> @@ -18,53 +18,66 @@
> */
>
> #include "sms-cards.h"
> +#ifdef SMS_RC_SUPPORT_SUBSYS
> #include "smsir.h"
> -
> -static int sms_dbg;
> -module_param_named(cards_dbg, sms_dbg, int, 0644);
> -MODULE_PARM_DESC(cards_dbg, "set debug level (info=1, adv=2
> (or-able))");
> -
> +#endif
> static struct sms_board sms_boards[] = {
> [SMS_BOARD_UNKNOWN] = {
> - .name = "Unknown board",
> + /* 0 */
> + .name = "Unknown board",
> + .type = SMS_UNKNOWN_TYPE,
> + .default_mode = SMSHOSTLIB_DEVMD_NONE,
> },
> [SMS1XXX_BOARD_SIANO_STELLAR] = {
> - .name = "Siano Stellar Digital Receiver",
> - .type = SMS_STELLAR,
> + /* 1 */
> + .name = "Siano Stellar Digital Receiver",
> + .type = SMS_STELLAR,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> },
> [SMS1XXX_BOARD_SIANO_NOVA_A] = {
> - .name = "Siano Nova A Digital Receiver",
> - .type = SMS_NOVA_A0,
> + /* 2 */
> + .name = "Siano Nova A Digital Receiver",
> + .type = SMS_NOVA_A0,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> },
> [SMS1XXX_BOARD_SIANO_NOVA_B] = {
> - .name = "Siano Nova B Digital Receiver",
> - .type = SMS_NOVA_B0,
> + /* 3 */
> + .name = "Siano Nova B Digital Receiver",
> + .type = SMS_NOVA_B0,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> },
> [SMS1XXX_BOARD_SIANO_VEGA] = {
> - .name = "Siano Vega Digital Receiver",
> - .type = SMS_VEGA,
> + /* 4 */
> + .name = "Siano Vega Digital Receiver",
> + .type = SMS_VEGA,
> + .default_mode = SMSHOSTLIB_DEVMD_CMMB,
> },
> [SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT] = {
> - .name = "Hauppauge Catamount",
> - .type = SMS_STELLAR,
> + /* 5 */
> + .name = "Hauppauge Catamount",
> + .type = SMS_STELLAR,
> .fw[SMSHOSTLIB_DEVMD_DVBT_BDA] = "sms1xxx-stellar-dvbt-01.fw",
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> },
> [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A] = {
> - .name = "Hauppauge Okemo-A",
> - .type = SMS_NOVA_A0,
> + /* 6 */
> + .name = "Hauppauge Okemo-A",
> + .type = SMS_NOVA_A0,
> .fw[SMSHOSTLIB_DEVMD_DVBT_BDA] = "sms1xxx-nova-a-dvbt-01.fw",
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> },
> [SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B] = {
> - .name = "Hauppauge Okemo-B",
> - .type = SMS_NOVA_B0,
> + /* 7 */
> + .name = "Hauppauge Okemo-B",
> + .type = SMS_NOVA_B0,
> .fw[SMSHOSTLIB_DEVMD_DVBT_BDA] = "sms1xxx-nova-b-dvbt-01.fw",
> },
> [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
> - .name = "Hauppauge WinTV MiniStick",
> - .type = SMS_NOVA_B0,
> - .fw[SMSHOSTLIB_DEVMD_ISDBT_BDA] = "sms1xxx-hcw-55xxx-isdbt-02.fw",
> + /* 8 */
> + .name = "Hauppauge WinTV MiniStick",
> + .type = SMS_NOVA_B0,
> .fw[SMSHOSTLIB_DEVMD_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
> - .rc_codes = RC_MAP_HAUPPAUGE,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> .board_cfg.leds_power = 26,
> .board_cfg.led0 = 27,
> .board_cfg.led1 = 28,
> @@ -74,29 +87,91 @@ static struct sms_board sms_boards[] = {
> .led_hi = 28,
> },
> [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD] = {
> + /* 9 */
> .name = "Hauppauge WinTV MiniCard",
> .type = SMS_NOVA_B0,
> .fw[SMSHOSTLIB_DEVMD_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> .lna_ctrl = 29,
> .board_cfg.foreign_lna0_ctrl = 29,
> .rf_switch = 17,
> .board_cfg.rf_switch_uhf = 17,
> },
> [SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2] = {
> - .name = "Hauppauge WinTV MiniCard",
> - .type = SMS_NOVA_B0,
> + /* 10 */
> + .name = "Hauppauge WinTV MiniCard",
> + .type = SMS_NOVA_B0,
> .fw[SMSHOSTLIB_DEVMD_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> + .board_cfg.foreign_lna0_ctrl = 1,
> .lna_ctrl = -1,
> },
> [SMS1XXX_BOARD_SIANO_NICE] = {
> /* 11 */
> .name = "Siano Nice Digital Receiver",
> .type = SMS_NOVA_B0,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> },
> [SMS1XXX_BOARD_SIANO_VENICE] = {
> /* 12 */
> .name = "Siano Venice Digital Receiver",
> - .type = SMS_VEGA,
> + .type = SMS_VENICE,
> + .default_mode = SMSHOSTLIB_DEVMD_CMMB,
> + },
> + [SMS1XXX_BOARD_SIANO_STELLAR_ROM] = {
> + /* 13 */
> + .name =
> + "Siano Stellar Digital Receiver ROM",
> + .type = SMS_STELLAR,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> + .intf_num = 1,
> + },
> + [SMS1XXX_BOARD_ZTE_DVB_DATA_CARD] = {
> + /* 14 */
> + .name = "ZTE Data Card Digital Receiver",
> + .type = SMS_NOVA_B0,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> + .intf_num = 5,
> + .mtu = 15792,
> + },
> + [SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD] = {
> + /* 15 */
> + .name = "ONDA Data Card Digital Receiver",
> + .type = SMS_NOVA_B0,
> + .default_mode = SMSHOSTLIB_DEVMD_DVBT_BDA,
> + .intf_num = 6,
> + .mtu = 15792,
> + },
> + [SMS1XXX_BOARD_SIANO_MING] = {
> + /* 16 */
> + .name = "Siano Ming Digital Receiver",
> + .type = SMS_MING,
> + .default_mode = SMSHOSTLIB_DEVMD_CMMB,
> + },
> + [SMS1XXX_BOARD_SIANO_PELE] = {
> + /* 17 */
> + .name = "Siano Pele Digital Receiver",
> + .type = SMS_PELE,
> + .default_mode = SMSHOSTLIB_DEVMD_ISDBT_BDA,
> + },
> + [SMS1XXX_BOARD_SIANO_RIO] = {
> + /* 18 */
> + .name = "Siano Rio Digital Receiver",
> + .type = SMS_RIO,
> + .default_mode = SMSHOSTLIB_DEVMD_ISDBT_BDA,
> + },
> + [SMS1XXX_BOARD_SIANO_DENVER_1530] = {
> + /* 19 */
> + .name = "Siano Denver (ATSC-M/H) Digital Receiver",
> + .type = SMS_DENVER_1530,
> + .default_mode = SMSHOSTLIB_DEVMD_ATSC,
> + .crystal = 2400,
> + },
> + [SMS1XXX_BOARD_SIANO_DENVER_2160] = {
> + /* 20 */
> + .name = "Siano Denver (TDMB) Digital Receiver",
> + .type = SMS_DENVER_2160,
> + .default_mode = SMSHOSTLIB_DEVMD_DAB_TDMB,
> },
> };
>
> @@ -110,8 +185,7 @@ EXPORT_SYMBOL_GPL(sms_get_board);
> static inline void sms_gpio_assign_11xx_default_led_config(
> struct smscore_gpio_config *pGpioConfig) {
> pGpioConfig->direction = SMS_GPIO_DIRECTION_OUTPUT;
> - pGpioConfig->input_characteristics =
> - SMS_GPIO_INPUTCHARACTERISTICS_NORMAL;
> + pGpioConfig->input_characteristics =
> SMS_GPIO_INPUTCHARACTERISTICS_NORMAL;
> pGpioConfig->output_driving = SMS_GPIO_OUTPUTDRIVING_4mA;
> pGpioConfig->output_slew_rate = SMS_GPIO_OUTPUTSLEWRATE_0_45_V_NS;
> pGpioConfig->pull_up_down = SMS_GPIO_PULLUPDOWN_NONE;
> @@ -119,21 +193,99 @@ static inline void
> sms_gpio_assign_11xx_default_led_config(
>
> int sms_board_event(struct smscore_device_t *coredev,
> enum SMS_BOARD_EVENTS gevent) {
> + int board_id = smscore_get_board_id(coredev);
> + struct sms_board *board = sms_get_board(board_id);
> struct smscore_gpio_config MyGpioConfig;
>
> sms_gpio_assign_11xx_default_led_config(&MyGpioConfig);
>
> switch (gevent) {
> case BOARD_EVENT_POWER_INIT: /* including hotplug */
> + switch (board_id) {
> + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + /* set I/O and turn off all LEDs */
> + smscore_gpio_configure(coredev,
> + board->board_cfg.leds_power,
> + &MyGpioConfig);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.leds_power, 0);
> + smscore_gpio_configure(coredev, board->board_cfg.led0,
> + &MyGpioConfig);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led0, 0);
> + smscore_gpio_configure(coredev, board->board_cfg.led1,
> + &MyGpioConfig);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led1, 0);
> + break;
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
> + /* set I/O and turn off LNA */
> + smscore_gpio_configure(coredev,
> + board->board_cfg.foreign_lna0_ctrl,
> + &MyGpioConfig);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.foreign_lna0_ctrl,
> + 0);
> + break;
> + }
> break; /* BOARD_EVENT_BIND */
>
> case BOARD_EVENT_POWER_SUSPEND:
> + switch (board_id) {
> + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.leds_power, 0);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led0, 0);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led1, 0);
> + break;
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.foreign_lna0_ctrl,
> + 0);
> + break;
> + }
> break; /* BOARD_EVENT_POWER_SUSPEND */
>
> case BOARD_EVENT_POWER_RESUME:
> + switch (board_id) {
> + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.leds_power, 1);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led0, 1);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led1, 0);
> + break;
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.foreign_lna0_ctrl,
> + 1);
> + break;
> + }
> break; /* BOARD_EVENT_POWER_RESUME */
>
> case BOARD_EVENT_BIND:
> + switch (board_id) {
> + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.leds_power, 1);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led0, 1);
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led1, 0);
> + break;
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
> + case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.foreign_lna0_ctrl,
> + 1);
> + break;
> + }
> break; /* BOARD_EVENT_BIND */
>
> case BOARD_EVENT_SCAN_PROG:
> @@ -143,8 +295,20 @@ int sms_board_event(struct smscore_device_t
> *coredev,
> case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL:
> break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */
> case BOARD_EVENT_FE_LOCK:
> + switch (board_id) {
> + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led1, 1);
> + break;
> + }
> break; /* BOARD_EVENT_FE_LOCK */
> case BOARD_EVENT_FE_UNLOCK:
> + switch (board_id) {
> + case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev,
> + board->board_cfg.led1, 0);
> + break;
> + }
> break; /* BOARD_EVENT_FE_UNLOCK */
> case BOARD_EVENT_DEMOD_LOCK:
> break; /* BOARD_EVENT_DEMOD_LOCK */
> @@ -211,6 +375,7 @@ int sms_board_setup(struct smscore_device_t
> *coredev)
>
> switch (board_id) {
> case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev, board->board_cfg.led1, 1);
> /* turn off all LEDs */
> sms_set_gpio(coredev, board->led_power, 0);
> sms_set_gpio(coredev, board->led_hi, 0);
> @@ -233,6 +398,7 @@ int sms_board_power(struct smscore_device_t
> *coredev, int onoff)
>
> switch (board_id) {
> case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
> + smscore_gpio_set_level(coredev, board->board_cfg.led1, 0);
> /* power LED */
> sms_set_gpio(coredev,
> board->led_power, onoff ? 1 : 0);
prev parent reply other threads:[~2011-09-23 22:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-20 10:31 [PATCH 6/17]DVB:Siano drivers - Add support in various boards implemented with siano devices Doron Cohen
2011-09-23 22:24 ` Mauro Carvalho Chehab [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E7D070D.2030301@redhat.com \
--to=mchehab@redhat.com \
--cc=doronc@siano-ms.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.