From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4E8239E4.9010904@domain.hid> Date: Tue, 27 Sep 2011 23:02:28 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Subject: Re: [Xenomai-help] Command code working with comedi not working with analogy List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: =?UTF-8?B?RmVybmFuZG8gSGVycmVybyBDYXJyw7Nu?= Cc: xenomai@xenomai.org On 09/27/2011 08:55 PM, Fernando Herrero Carr=C3=B3n wrote: > Hi all, >=20 > This is my first post to the list. I have been playing around with > RTAI+Comedi for a while and wanted to give Xenomai+Analogy a chance. I = am > running a linux 2.6.32.20 kernel on an AMD Phenom(tm) II X4 965, with > Xenomai 2.5.5.2. Xenomai appears to be running fine, analogy recognizes= my > NI 6143 and NI 6713 cards, and "analogy-config" sets things properly up= =2E >=20 > Now I cannot succeed at running any of the "command" functions. The exa= mple > programs "insn_read" and "insn_write" work fine, but "cmd_read" and > "cmd_write" don't. They fail at "a4l_snd_command". >=20 > I ported an application that is already working with comedi to analogy.= My > question is now whether the same values for the command structures that= are > working on Comedi should work directly with Analogy, because the > corresponding "a4l_snd_command" is failing with those values, returning= a > value of -22. >=20 > Thank you very much for your help, > Fernando Hi, could you try Xenomai 2.6.0-rc3? Regards. --=20 Gilles.