From: Adrian Hunter <adrian.hunter@intel.com>
To: Seungwon Jeon <tgih.jun@samsung.com>
Cc: linux-mmc@vger.kernel.org, Chris Ball <cjb@laptop.org>,
linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
dh.han@samsung.com
Subject: Re: [PATCH v4] mmc: core: Add default timeout value for CMD6.
Date: Tue, 04 Oct 2011 16:11:04 +0300 [thread overview]
Message-ID: <4E8B05E8.2030206@intel.com> (raw)
In-Reply-To: <1316657541-9221-1-git-send-email-tgih.jun@samsung.com>
On 22/09/11 05:12, Seungwon Jeon wrote:
> EXT_CSD[248] includes the default maximum timeout for CMD6.
> This field is added at eMMC4.5 Spec. And it can be used for default
> timeout except for some operations which don't define the timeout(i.e.
> background operation, sanitize, flush cache) in eMMC4.5 Spec.
>
> Signed-off-by: Seungwon Jeon<tgih.jun@samsung.com>
What about the mmc_switch() in mmc_select_powerclass()?
> ---
> drivers/mmc/core/mmc.c | 16 ++++++++++++----
> include/linux/mmc/card.h | 1 +
> include/linux/mmc/mmc.h | 1 +
> 3 files changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 5700b1c..b2ee14a 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -410,6 +410,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
> else
> card->erased_byte = 0x0;
>
> + if (card->ext_csd.rev>= 6)
> + card->ext_csd.generic_cmd6_time = 10 *
> + ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
> + else
> + card->ext_csd.generic_cmd6_time = 0;
> +
> out:
> return err;
> }
> @@ -668,7 +674,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> */
> if (card->ext_csd.enhanced_area_en) {
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> - EXT_CSD_ERASE_GROUP_DEF, 1, 0);
> + EXT_CSD_ERASE_GROUP_DEF, 1,
> + card->ext_csd.generic_cmd6_time);
>
> if (err&& err != -EBADMSG)
> goto free_card;
> @@ -711,7 +718,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> if ((card->ext_csd.hs_max_dtr != 0)&&
> (host->caps& MMC_CAP_MMC_HIGHSPEED)) {
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> - EXT_CSD_HS_TIMING, 1, 0);
> + EXT_CSD_HS_TIMING, 1,
> + card->ext_csd.generic_cmd6_time);
> if (err&& err != -EBADMSG)
> goto free_card;
>
> @@ -783,7 +791,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> EXT_CSD_BUS_WIDTH,
> ext_csd_bits[idx][0],
> - 0);
> + card->ext_csd.generic_cmd6_time);
> if (!err) {
> mmc_set_bus_width(card->host, bus_width);
>
> @@ -806,7 +814,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> EXT_CSD_BUS_WIDTH,
> ext_csd_bits[idx][1],
> - 0);
> + card->ext_csd.generic_cmd6_time);
> }
> if (err) {
> printk(KERN_WARNING "%s: switch to bus width %d ddr %d "
> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
> index b460fc2..b713abf 100644
> --- a/include/linux/mmc/card.h
> +++ b/include/linux/mmc/card.h
> @@ -52,6 +52,7 @@ struct mmc_ext_csd {
> u8 part_config;
> unsigned int part_time; /* Units: ms */
> unsigned int sa_timeout; /* Units: 100ns */
> + unsigned int generic_cmd6_time; /* Units: 10ms */
Units are "ms" not "10ms" because you multiply by 10 in mmc_read_ext_csd
> unsigned int hs_max_dtr;
> unsigned int sectors;
> unsigned int card_type;
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index 5a794cb..e869f00 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -293,6 +293,7 @@ struct _mmc_csd {
> #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
> #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
> #define EXT_CSD_TRIM_MULT 232 /* RO */
> +#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
>
> /*
> * EXT_CSD field definitions
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-10-04 13:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 2:12 [PATCH v4] mmc: core: Add default timeout value for CMD6 Seungwon Jeon
2011-09-22 22:11 ` J Freyensee
2011-09-23 0:58 ` Seungwon Jeon
2011-10-04 13:11 ` Adrian Hunter [this message]
2011-10-05 9:25 ` Seungwon Jeon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E8B05E8.2030206@intel.com \
--to=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=dh.han@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tgih.jun@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.