From: James <bjlockie@lockie.ca>
To: linux-media Mailing List <linux-media@vger.kernel.org>
Subject: Re: recent cx23385?
Date: Thu, 13 Oct 2011 12:31:17 -0400 [thread overview]
Message-ID: <4E971255.8080203@lockie.ca> (raw)
In-Reply-To: <CAGoCfiyViRDt690TWtiWdnfP5C-az2aeOK=TGhgP4kwT1QJfqQ@mail.gmail.com>
On 10/13/11 08:48, Devin Heitmueller wrote:
> On Thu, Oct 13, 2011 at 1:59 AM, James<bjlockie@lockie.ca> wrote:
>> Is there a newer cx23385 driver than the one in kernel-3.0.4?
>> I bought ahttp://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1250 and it
>> shows video for about 5 seconds and then locks up the system.
> You cannot install individual drivers (Linux doesn't work like Windows
> in this regards). You have to either install the latest kernel or you
> can swap out the whole media subsystem with a later version.
>
> http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
>
> Devin
Where do I see the date/version of the media subsystem?
It is not video related, w_scan works sometimes but freezes the kernel
sometimes.
This is booting right to a console.
Is there a program to do a stress test on the hardware and print lots of
messages as it's working?
$ modinfo cx23885
filename:
/lib/modules/3.0.4/kernel/drivers/media/video/cx23885/cx23885.ko
license: GPL
author: Steven Toth <stoth@linuxtv.org>
description: v4l2 driver module for cx23885 based TV cards
license: GPL
author: Steven Toth <stoth@linuxtv.org>
description: Driver for cx23885 based TV cards
alias: pci:v000014F1d00008880sv*sd*bc*sc*i*
alias: pci:v000014F1d00008852sv*sd*bc*sc*i*
depends:
videobuf-core,videobuf-dma-sg,stv0367,lnbp21,cx2341x,tveeprom,lgdt330x,videobuf-dvb,stv0900,zl10353,mt2131,ds3000,dib7000p,btcx-risc,tda10048,cx24116,s5h1411,s5h1409,stv6110
vermagic: 3.0.4 SMP mod_unload
parm: ci_dbg:Enable CI debugging (int)
parm: ci_irq_enable:Enable IRQ from CAM (int)
parm: ir_888_debug:enable debug messages [CX23888 IR
controller] (int)
parm: mpegbufs:number of mpeg buffers, range 2-32 (int)
parm: mpeglines:number of lines in an MPEG buffer, range 2-32
(int)
parm: mpeglinesize:number of bytes in each line of an MPEG
buffer, range 512-1024 (int)
parm: v4l_debug:enable V4L debug messages (int)
parm: alt_tuner:Enable alternate tuner configuration (int)
parm: adapter_nr:DVB adapter numbers (array of short)
parm: i2c_debug:enable debug messages [i2c] (int)
parm: i2c_scan:scan i2c bus at insmod time (int)
parm: debug:enable debug messages (int)
parm: card:card type (array of int)
parm: vbibufs:number of vbi buffers, range 2-32 (int)
parm: vbi_debug:enable debug messages [vbi] (int)
parm: video_nr:video device numbers (array of int)
parm: vbi_nr:vbi device numbers (array of int)
parm: radio_nr:radio device numbers (array of int)
parm: video_debug:enable debug messages [video] (int)
parm: irq_debug:enable debug messages [IRQ handler] (int)
parm: vid_limit:capture memory limit in megabytes (int)
parm: enable_885_ir:Enable integrated IR controller for supported
CX2388[57] boards that are wired for it:
HVR-1250 (reported safe)
TeVii S470 (reported unsafe)
This can cause an interrupt storm with some cards.
Default: 0 [Disabled] (int)
I did:
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
/bin/sh: /sbin/lsmod: No such file or directory
Lot's of pr_fmt redefined errors.
I put the build log at: lockie.ca/test/v4l_build.txt.bz2
Something is not right though. :-(
$ modprobe cx23885
WARNING: Deprecated config file /etc/modprobe.conf, all config files
belong into /etc/modprobe.d/.
WARNING: Error inserting altera_ci
(/lib/modules/3.0.4/kernel/drivers/media/video/cx23885/altera-ci.ko):
Invalid module format
WARNING: Error inserting media
(/lib/modules/3.0.4/kernel/drivers/media/media.ko): Invalid module format
WARNING: Error inserting videodev
(/lib/modules/3.0.4/kernel/drivers/media/video/videodev.ko): Invalid
module format
WARNING: Error inserting v4l2_common
(/lib/modules/3.0.4/kernel/drivers/media/video/v4l2-common.ko): Invalid
module format
WARNING: Error inserting videobuf_core
(/lib/modules/3.0.4/kernel/drivers/media/video/videobuf-core.ko):
Invalid module format
WARNING: Error inserting videobuf_dvb
(/lib/modules/3.0.4/kernel/drivers/media/video/videobuf-dvb.ko): Invalid
module format
WARNING: Error inserting videobuf_dma_sg
(/lib/modules/3.0.4/kernel/drivers/media/video/videobuf-dma-sg.ko):
Invalid module format
WARNING: Error inserting cx2341x
(/lib/modules/3.0.4/kernel/drivers/media/video/cx2341x.ko): Invalid
module format
WARNING: Error inserting altera_stapl
(/lib/modules/3.0.4/kernel/drivers/linux/drivers/misc/altera-stapl/altera-stapl.ko):
Invalid module format
WARNING: Error inserting rc_core
(/lib/modules/3.0.4/kernel/drivers/media/rc/rc-core.ko): Invalid module
format
FATAL: Error inserting cx23885
(/lib/modules/3.0.4/kernel/drivers/media/video/cx23885/cx23885.ko):
Invalid module format
next prev parent reply other threads:[~2011-10-13 16:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 5:59 recent cx23385? James
2011-10-13 12:48 ` Devin Heitmueller
2011-10-13 16:31 ` James [this message]
2011-10-13 16:38 ` James
2011-10-13 18:01 ` James
2011-10-13 17:52 ` Devin Heitmueller
2011-10-13 18:05 ` /bin/lsmod James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E971255.8080203@lockie.ca \
--to=bjlockie@lockie.ca \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.