From: Brad Campbell <lists2009-+nnirC7rrGZibQn6LdNjmg@public.gmane.org>
To: linux-bcache-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: Bcache explodes when trying to attach
Date: Sat, 15 Oct 2011 20:59:29 +0800 [thread overview]
Message-ID: <4E9983B1.9060803@fnarfbargle.com> (raw)
In-Reply-To: <4E991D90.1040008-+nnirC7rrGZibQn6LdNjmg@public.gmane.org>
On 15/10/11 13:43, Brad Campbell wrote:
> I'm trying bcache merged with linus' git head (-rc9). I suppose I should really try it with a
> vanilla bcache-dev tree.
>
> Anyway, I can register the cache and backing device but when I try and attach the cache set to the
> backing device this happens :
Ok, so the build was broken in some odd way. Turns out the latest git does not build unless you have
cgroups enabled (which by default I don't).
This came from the same scenario using a vanilla bcache git clone..
[ 162.412296] bio: create slab <bio-2> at 2
[ 162.441711] bcache: journal entries 3-4 missing! (replaying 2-4)
[ 162.441805] bcache: journal replay done, 0 keys in 2 entries, seq 2-4
[ 181.955480] md: resync of RAID array md10
[ 181.955526] ------------[ cut here ]------------
[ 181.955533] kernel BUG at drivers/scsi/scsi_lib.c:1152!
[ 181.955539] invalid opcode: 0000 [#1] SMP
[ 181.955546] CPU 1
[ 181.955549] Modules linked in: nfs ipt_MASQUERADE xt_tcpudp iptable_filter iptable_nat nf_nat
nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables deflate zlib_deflate des_generic
cbc ecb crypto_blkcipher sha1_generic md5 hmac crypto_hash cryptomgr aead crypto_algapi af_key fuse
w83627ehf hwmon_vid netconsole configfs vhost_net powernow_k8 mperf kvm_amd kvm xhci_hcd i2c_piix4
k10temp ohci_hcd ehci_hcd usbcore ahci libahci atl1c megaraid_sas [last unloaded: scsi_wait_scan]
[ 181.955600]
[ 181.955606] Pid: 1422, comm: md10_raid10 Not tainted 3.1.0-rc9-00152-g3900b5a-dirty #6 To Be
Filled By O.E.M. To Be Filled By O.E.M./890GX Extreme4 R2.0
[ 181.955616] RIP: 0010:[<ffffffff812ad4ee>] [<ffffffff812ad4ee>] scsi_setup_fs_cmnd+0xae/0xf0
[ 181.955631] RSP: 0018:ffff88041bfdbbe0 EFLAGS: 00010046
[ 181.955636] RAX: 0000000000000000 RBX: ffff88041c4d3830 RCX: 0000000000001000
[ 181.955641] RDX: 0000000000000000 RSI: ffff88041c4d3830 RDI: ffff88041c754800
[ 181.955645] RBP: ffff88041c754800 R08: 0000000000000000 R09: 0000000000000001
[ 181.955650] R10: 4080000000000000 R11: 0000000000000000 R12: ffff88041c754800
[ 181.955654] R13: 0000000000000808 R14: ffff88041c754848 R15: ffff88041c3cbc00
[ 181.955661] FS: 00007fc823617700(0000) GS:ffff88042fc40000(0000) knlGS:0000000000000000
[ 181.955668] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 181.955672] CR2: ffffffffff600400 CR3: 00000003ffe02000 CR4: 00000000000006e0
[ 181.955677] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 181.955681] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 181.955687] Process md10_raid10 (pid: 1422, threadinfo ffff88041bfda000, task ffff88041c1bcb00)
[ 181.955691] Stack:
[ 181.955693] 0000000000000000 ffff88041c4d3830 ffff88041bd83c30 ffffffff812b7fec
[ 181.955701] 01ff88041c755000 ffff880400000001 ffff880400001000 0000000000000000
[ 181.955707] ffff88041c4d3830 ffff88041c4d3830 ffff88041c4d3830 ffff88041bd83c30
[ 181.955714] Call Trace:
[ 181.955723] [<ffffffff812b7fec>] ? sd_prep_fn+0x15c/0xa50
[ 181.955732] [<ffffffff811c8c04>] ? blk_peek_request+0xb4/0x1d0
[ 181.955739] [<ffffffff812aca10>] ? scsi_request_fn+0x50/0x4a0
[ 181.955747] [<ffffffff811c95b8>] ? blk_flush_plug_list+0x188/0x210
[ 181.955755] [<ffffffff811c964b>] ? blk_finish_plug+0xb/0x30
[ 181.955762] [<ffffffff812fa768>] ? raid10d+0x908/0xb50
[ 181.955770] [<ffffffff81041183>] ? lock_timer_base+0x33/0x70
[ 181.955779] [<ffffffff814082b5>] ? schedule_timeout+0x1c5/0x230
[ 181.955786] [<ffffffff8130e57f>] ? md_thread+0x10f/0x140
[ 181.955795] [<ffffffff81050260>] ? wake_up_bit+0x40/0x40
[ 181.955801] [<ffffffff8130e470>] ? md_register_thread+0x100/0x100
[ 181.955807] [<ffffffff8130e470>] ? md_register_thread+0x100/0x100
[ 181.955814] [<ffffffff8104fe06>] ? kthread+0x96/0xa0
[ 181.955821] [<ffffffff8140b4f4>] ? kernel_thread_helper+0x4/0x10
[ 181.955829] [<ffffffff8104fd70>] ? kthread_worker_fn+0x120/0x120
[ 181.955836] [<ffffffff8140b4f0>] ? gs_change+0xb/0xb
[ 181.955839] Code: 80 00 00 00 00 48 83 c4 08 5b 5d c3 90 48 89 ef be 20 00 00 00 e8 73 a2 ff ff
48 85 c0 48 89 c7 74 d7 48 89 83 d8 00 00 00 eb 8d <0f> 0b eb fe 48 8b 00 48 85 c0 0f 84 67 ff ff ff
48 8b 40 50 48
[ 181.955879] RIP [<ffffffff812ad4ee>] scsi_setup_fs_cmnd+0xae/0xf0
[ 181.955887] RSP <ffff88041bfdbbe0>
[ 181.955892] ---[ end trace 56499f30ff553488 ]---
[ 181.955896] Kernel panic - not syncing: Fatal exception
[ 181.955902] Pid: 1422, comm: md10_raid10 Tainted: G D 3.1.0-rc9-00152-g3900b5a-dirty #6
[ 181.955906] Call Trace:
[ 181.955913] [<ffffffff81406f69>] ? panic+0x92/0x193
[ 181.955920] [<ffffffff81035451>] ? kmsg_dump+0x41/0xf0
[ 181.955929] [<ffffffff8100504d>] ? oops_end+0x8d/0xa0
[ 181.955936] [<ffffffff81002e34>] ? do_invalid_op+0x84/0xa0
[ 181.955943] [<ffffffff812ad4ee>] ? scsi_setup_fs_cmnd+0xae/0xf0
[ 181.955952] [<ffffffff811d69ae>] ? cfq_set_request+0x15e/0x3b0
[ 181.955958] [<ffffffff8140b375>] ? invalid_op+0x15/0x20
[ 181.955966] [<ffffffff812ad4ee>] ? scsi_setup_fs_cmnd+0xae/0xf0
[ 181.955972] [<ffffffff812b7fec>] ? sd_prep_fn+0x15c/0xa50
[ 181.955979] [<ffffffff811c8c04>] ? blk_peek_request+0xb4/0x1d0
[ 181.955986] [<ffffffff812aca10>] ? scsi_request_fn+0x50/0x4a0
[ 181.955993] [<ffffffff811c95b8>] ? blk_flush_plug_list+0x188/0x210
[ 181.956001] [<ffffffff811c964b>] ? blk_finish_plug+0xb/0x30
[ 181.956007] [<ffffffff812fa768>] ? raid10d+0x908/0xb50
[ 181.956013] [<ffffffff81041183>] ? lock_timer_base+0x33/0x70
[ 181.956021] [<ffffffff814082b5>] ? schedule_timeout+0x1c5/0x230
[ 181.956028] [<ffffffff8130e57f>] ? md_thread+0x10f/0x140
[ 181.956035] [<ffffffff81050260>] ? wake_up_bit+0x40/0x40
[ 181.956041] [<ffffffff8130e470>] ? md_register_thread+0x100/0x100
[ 181.956047] [<ffffffff8130e470>] ? md_register_thread+0x100/0x100
[ 181.956054] [<ffffffff8104fe06>] ? kthread+0x96/0xa0
[ 181.956060] [<ffffffff8140b4f4>] ? kernel_thread_helper+0x4/0x10
[ 181.956068] [<ffffffff8104fd70>] ? kthread_worker_fn+0x120/0x120
[ 181.956075] [<ffffffff8140b4f0>] ? gs_change+0xb/0xb
[ 181.958475] Rebooting in 10 seconds..
next prev parent reply other threads:[~2011-10-15 12:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-15 5:43 Bcache explodes when trying to attach Brad Campbell
[not found] ` <4E991D90.1040008-+nnirC7rrGZibQn6LdNjmg@public.gmane.org>
2011-10-15 12:59 ` Brad Campbell [this message]
[not found] ` <4E9983B1.9060803-+nnirC7rrGZibQn6LdNjmg@public.gmane.org>
2011-10-16 5:08 ` Kent Overstreet
[not found] ` <CAC7rs0sm5BgEawAZYjJjnrqAgyK+D96vmpn=1NEQuTJGk+BgAg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-10-16 5:15 ` Brad Campbell
[not found] ` <4E9A6866.70803-+nnirC7rrGZibQn6LdNjmg@public.gmane.org>
2011-10-16 5:38 ` Kent Overstreet
[not found] ` <CAC7rs0vCA_j9O8-=Xouu0qH+yQxg8zYTP4K802TFJ2sm46OLfg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-10-17 13:52 ` Brad Campbell
[not found] ` <4E9C330C.6090801-+nnirC7rrGZibQn6LdNjmg@public.gmane.org>
2011-10-18 4:48 ` Kent Overstreet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9983B1.9060803@fnarfbargle.com \
--to=lists2009-+nnirc7rrgzibqn6ldnjmg@public.gmane.org \
--cc=linux-bcache-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.