From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net
Subject: Re: [net-next 0/7] stmmac: update to Oct 2011 version (V2)
Date: Tue, 18 Oct 2011 10:44:58 +0200 [thread overview]
Message-ID: <4E9D3C8A.50403@st.com> (raw)
In-Reply-To: <1318927331-20855-1-git-send-email-peppe.cavallaro@st.com>
Sorry this is the V3 :-(
Peppe
On 10/18/2011 10:42 AM, Giuseppe CAVALLARO wrote:
> This patches update the driver adding the chained
> descriptor mode and some new useful fixes.
>
> I've reviewed some patches after the V1 and V2:
>
> stmmac: allow mtu bigger than 1500 in case of normal desc (V3)
> |-> removed the useless max_mtu init: Thx Eric's feedback
>
> stmmac: add CHAINED descriptor mode support (V3)
> |-> removed ifdef in the C and added small routines
> specialised for chained/ring modes. See comment
> within the patch itself. Thx David's feedback.
>
> stmmac: allow mmc usage only if feature actually available (V3)
> |-> added a check if interface is NULL
>
> In the end, I added two new small patches:
>
> stmmac: use predefined macros for HW cap register fields (V3)
> stmmac: allow mmc usage only if feature actually available (V3)
>
> made by Rayagond and reviewed/reworked by myself
>
> Let me know if it's ok.
>
> Giuseppe Cavallaro (5):
> stmmac: protect tx process with lock (V3)
> stmmac: update the driver version and doc (V3)
> stmmac: allow mtu bigger than 1500 in case of normal desc (V3)
> stmmac: allow mmc usage only if feature actually available (V3)
> stmmac: add CHAINED descriptor mode support (V3)
>
> Rayagond Kokatanur (1):
> stmmac: use predefined macros for HW cap register fields (V3)
>
> Srinivas Kandagatla (1):
> stmmac: Stop advertising 1000Base capabilties for non GMII iface
> (V3).
>
> Documentation/networking/stmmac.txt | 11 +-
> drivers/net/ethernet/stmicro/stmmac/Kconfig | 18 ++
> drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +
> drivers/net/ethernet/stmicro/stmmac/chain_mode.c | 137 +++++++++++++
> drivers/net/ethernet/stmicro/stmmac/common.h | 43 ++++
> drivers/net/ethernet/stmicro/stmmac/descs_com.h | 126 ++++++++++++
> drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 22 +--
> drivers/net/ethernet/stmicro/stmmac/norm_desc.c | 14 +-
> drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 126 ++++++++++++
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 5 +-
> .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 24 ++-
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 212 ++++++++++----------
> 12 files changed, 602 insertions(+), 138 deletions(-)
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/chain_mode.c
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/descs_com.h
> create mode 100644 drivers/net/ethernet/stmicro/stmmac/ring_mode.c
>
prev parent reply other threads:[~2011-10-18 8:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-18 8:42 [net-next 0/7] stmmac: update to Oct 2011 version (V2) Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 1/7] stmmac: Stop advertising 1000Base capabilties for non GMII iface (V3) Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 2/7] stmmac: protect tx process with lock (V3) Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 3/7] stmmac: update the driver version and doc (V3) Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 4/7] stmmac: allow mtu bigger than 1500 in case of normal desc (V3) Giuseppe CAVALLARO
2011-10-18 9:03 ` Eric Dumazet
2011-10-18 9:26 ` Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 5/7] stmmac: use predefined macros for HW cap register fields (V3) Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 6/7] stmmac: allow mmc usage only if feature actually available (V3) Giuseppe CAVALLARO
2011-10-18 8:42 ` [net-next 7/7] stmmac: add CHAINED descriptor mode support (V3) Giuseppe CAVALLARO
2011-10-18 9:51 ` Giuseppe CAVALLARO
2011-10-18 8:44 ` Giuseppe CAVALLARO [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9D3C8A.50403@st.com \
--to=peppe.cavallaro@st.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.