From: David Henningsson <david.henningsson@canonical.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: [REGRESSION] Sound goes too fast due to 798cb7e897210
Date: Tue, 18 Oct 2011 15:11:23 +0200 [thread overview]
Message-ID: <4E9D7AFB.3030409@canonical.com> (raw)
In-Reply-To: <s5hty761ybk.wl%tiwai@suse.de>
(Sorry for removing some CC people from this mail, seems to be a mail
problem at this end)
2011-10-18 10:46, Takashi Iwai skrev:
> At Tue, 18 Oct 2011 10:38:06 +0200,
> Éric Piel wrote:
>> Op 18-10-11 10:23, Takashi Iwai schreef:
>>> At Tue, 18 Oct 2011 10:10:14 +0200,
>>> Éric Piel wrote:
>> :
>>> If that commit affects, the best fix would be to give a quirk specific
>>> to your device. Try to pass either position_fix=1 or position_fix=2.
>>> Only one of them should work (likely 2).
>>>
>>> After checking it, you can add it to position_fix_list[] in
>>> sound/pci/hda/hda_intel.c together with PCI SSID.
>> Hello,
>> Thanks for the quick response. Indeed forcing position_fix=1 does fix
>> the bug. I'll not try to make a patch for my device.
> Hm, interesting. So, in your case, the position-buffer exists and
> reports some valid values, but the values are sloppy actually.
> It's hard to detect in the driver, unfortunately. The relevant commit
> (and its original fix) were the attempts to detect better, but it
> seems that it fails...
>
> FWIW, the patch below is what I'm committing to the tree.
I'm wondering if quirking this based on PCI Vendor-ID would be better
than PCI SSID. After all, a broken position buffer should be more of a
controller chip problem than a controller/codec/config problem, right?
> ---
> From: Takashi Iwai<tiwai@suse.de>
> Subject: [PATCH] ALSA: hda - Add position_fix quirk for Dell Inspiron 1010
>
> The previous fix for the position-buffer check gives yet another
> regression on a Dell laptop. The safest fix right now is to add a
> static quirk for this device (and better to apply it for stable
> kernels too).
>
> Reported-by: Éric Piel<Eric.Piel@tremplin-utc.net>
> Cc:<stable@kernel.org>
> Signed-off-by: Takashi Iwai<tiwai@suse.de>
> ---
> sound/pci/hda/hda_intel.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index e9a2a87..191284a 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -2370,6 +2370,7 @@ static int azx_dev_free(struct snd_device *device)
> static struct snd_pci_quirk position_fix_list[] __devinitdata = {
> SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
> SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
> + SND_PCI_QUIRK(0x1028, 0x02c6, "Dell Inspiron 1010", POS_FIX_LPIB),
As seen here there are several relatively similar IDs - even more reason
to suspect they share the same controller chip perhaps?
// David
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2011-10-18 13:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-18 8:10 [REGRESSION] Sound goes too fast due to 798cb7e897210 Éric Piel
2011-10-18 8:23 ` Takashi Iwai
2011-10-18 8:23 ` Takashi Iwai
2011-10-18 8:38 ` Éric Piel
2011-10-18 8:46 ` Takashi Iwai
2011-10-18 9:10 ` Éric Piel
2011-10-18 13:11 ` David Henningsson [this message]
2011-10-18 13:22 ` Takashi Iwai
2011-10-18 14:48 ` David Henningsson
2011-10-18 14:51 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9D7AFB.3030409@canonical.com \
--to=david.henningsson@canonical.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.