From: Oliver Schinagl <oliver@schinagl.nl>
To: linux-acpi@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [Bug 42502] PROBLEM: USB 1.1 (and up) not working on AMD R900 Series chipset
Date: Wed, 19 Oct 2011 10:59:22 +0200 [thread overview]
Message-ID: <4E9E916A.4050007@schinagl.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 341 bytes --]
I've updated the BIOS to the latest version supplied by the manufacturer
and ran 2 new dmesges. I diffed them (stripped of timestamps) with the
original ones. It did not solve or influence USB support on a 64bit
kernel in any way. So still USB less on this specific board.
I'd update the bugreport, but the bugzilla is still offline :(
[-- Attachment #2: dmesg.64.diff --]
[-- Type: text/x-patch, Size: 29128 bytes --]
--- dmesg64.v1 2011-10-18 19:30:12.968540175 +0200
+++ dmesg64.v2 2011-10-18 19:30:22.620418836 +0200
@@ -6,18 +6,18 @@
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bd94d000 (usable)
- BIOS-e820: 00000000bd94d000 - 00000000bd99c000 (ACPI NVS)
- BIOS-e820: 00000000bd99c000 - 00000000bd9a4000 (ACPI data)
- BIOS-e820: 00000000bd9a4000 - 00000000bdadc000 (reserved)
- BIOS-e820: 00000000bdadc000 - 00000000bdaed000 (ACPI NVS)
- BIOS-e820: 00000000bdaed000 - 00000000bdb00000 (reserved)
- BIOS-e820: 00000000bdb00000 - 00000000bdb02000 (ACPI NVS)
- BIOS-e820: 00000000bdb02000 - 00000000bdb0b000 (reserved)
- BIOS-e820: 00000000bdb0b000 - 00000000bdb11000 (ACPI NVS)
- BIOS-e820: 00000000bdb11000 - 00000000bdb70000 (reserved)
- BIOS-e820: 00000000bdb70000 - 00000000bdd73000 (ACPI NVS)
- BIOS-e820: 00000000bdd73000 - 00000000bdf00000 (usable)
+ BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable)
+ BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS)
+ BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data)
+ BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved)
+ BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS)
+ BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved)
+ BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS)
+ BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved)
+ BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS)
+ BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved)
+ BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS)
+ BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
@@ -29,7 +29,7 @@
BIOS-e820: 0000000100001000 - 0000000240000000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
- DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0503 05/30/2011
+ DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
@@ -42,10 +42,10 @@
D1000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
- 0 base 000000000000 mask FFFF00000000 write-back
- 1 base 0000BDF00000 mask FFFFFFF00000 uncachable
- 2 base 0000BE000000 mask FFFFFE000000 uncachable
- 3 base 0000C0000000 mask FFFFC0000000 uncachable
+ 0 base 000000000000 mask FFFF80000000 write-back
+ 1 base 000080000000 mask FFFFC0000000 write-back
+ 2 base 0000BDF00000 mask FFFFFFF00000 uncachable
+ 3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
@@ -66,15 +66,15 @@
kernel direct mapping tables up to 240000000 @ bdeff000-bdf00000
RAMDISK: 7f738000 - 80000000
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
- ACPI: XSDT 00000000bd99c068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
- ACPI: FACP 00000000bd9a2a68 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: XSDT 00000000bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: FACP 00000000bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
- ACPI: DSDT 00000000bd99c140 06924 (v02 ALASKA A M I 00000000 INTL 20051117)
- ACPI: FACS 00000000bdb0bf80 00040
- ACPI: APIC 00000000bd9a2b60 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
- ACPI: MCFG 00000000bd9a2c00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- ACPI: HPET 00000000bd9a2c40 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
- ACPI: SSDT 00000000bd9a2c78 00DDA (v01 AMD POWERNOW 00000001 AMD 00000001)
+ ACPI: DSDT 00000000bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117)
+ ACPI: FACS 00000000bdb0df80 00040
+ ACPI: APIC 00000000bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: MCFG 00000000bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
+ ACPI: HPET 00000000bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
+ ACPI: SSDT 00000000bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
@@ -89,15 +89,15 @@
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x000bd94d
- 0: 0x000bdd73 -> 0x000bdf00
+ 0: 0x00000100 -> 0x000bd94e
+ 0: 0x000bdd78 -> 0x000bdf00
0: 0x00100001 -> 0x00240000
- On node 0 totalpages: 2087526
+ On node 0 totalpages: 2087522
DMA zone: 56 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3918 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 758546 pages, LIFO batch:31
+ DMA32 zone: 758542 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292799 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
@@ -128,16 +128,16 @@
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- PM: Registered nosave memory: 00000000bd94d000 - 00000000bd99c000
- PM: Registered nosave memory: 00000000bd99c000 - 00000000bd9a4000
- PM: Registered nosave memory: 00000000bd9a4000 - 00000000bdadc000
- PM: Registered nosave memory: 00000000bdadc000 - 00000000bdaed000
- PM: Registered nosave memory: 00000000bdaed000 - 00000000bdb00000
- PM: Registered nosave memory: 00000000bdb00000 - 00000000bdb02000
- PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb0b000
- PM: Registered nosave memory: 00000000bdb0b000 - 00000000bdb11000
- PM: Registered nosave memory: 00000000bdb11000 - 00000000bdb70000
- PM: Registered nosave memory: 00000000bdb70000 - 00000000bdd73000
+ PM: Registered nosave memory: 00000000bd94e000 - 00000000bd99d000
+ PM: Registered nosave memory: 00000000bd99d000 - 00000000bd9a6000
+ PM: Registered nosave memory: 00000000bd9a6000 - 00000000bdade000
+ PM: Registered nosave memory: 00000000bdade000 - 00000000bdaef000
+ PM: Registered nosave memory: 00000000bdaef000 - 00000000bdb02000
+ PM: Registered nosave memory: 00000000bdb02000 - 00000000bdb04000
+ PM: Registered nosave memory: 00000000bdb04000 - 00000000bdb0d000
+ PM: Registered nosave memory: 00000000bdb0d000 - 00000000bdb13000
+ PM: Registered nosave memory: 00000000bdb13000 - 00000000bdb75000
+ PM: Registered nosave memory: 00000000bdb75000 - 00000000bdd78000
PM: Registered nosave memory: 00000000bdf00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
@@ -161,14 +161,14 @@
PERCPU: Embedded 28 pages/cpu @ffff8800bd600000 s84416 r8192 d22080 u262144
pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055263
+ Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055259
Policy zone: Normal
Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/64bit/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/64bit/linux
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ f8000000 size 64 MB
- Memory: 8145952k/9437184k available (5940k kernel code, 1087080k absent, 204152k reserved, 5017k data, 956k init)
+ Memory: 8145936k/9437184k available (5940k kernel code, 1087096k absent, 204152k reserved, 5017k data, 956k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
@@ -181,8 +181,8 @@
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
- Detected 3211.088 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.17 BogoMIPS (lpj=32110880)
+ Detected 3211.052 MHz processor.
+ Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.10 BogoMIPS (lpj=32110520)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
@@ -227,12 +227,12 @@
Switch to broadcast mode on CPU4
#5
Brought up 6 CPUs
- Total of 6 processors activated (38530.17 BogoMIPS).
+ Total of 6 processors activated (38530.08 BogoMIPS).
Switch to broadcast mode on CPU5
Switch to broadcast mode on CPU0
devtmpfs: initialized
print_constraints: dummy:
- Time: 23:05:30 Date: 09/07/11
+ Time: 15:04:26 Date: 10/16/11
NET: Registered protocol family 16
node 0 link 0: io port [d000, ffff]
TOM: 00000000c0000000 aka 3072M
@@ -245,15 +245,18 @@
bus: 00 index 2 [mem 0xf0000000-0xffffffff]
bus: 00 index 3 [mem 0x240000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
- Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
+ Trying to unpack rootfs image as initramfs...
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
+ mtrr: your CPUs had inconsistent fixed MTRR settings
+ mtrr: probably your BIOS does not setup all CPUs.
+ mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
- ACPI: Executed 3 blocks of module-level executable AML code
+ ACPI: Executed 2 blocks of module-level executable AML code
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349)
ACPI: Interpreter enabled
@@ -261,8 +264,8 @@
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
Freeing initrd memory: 8992k freed
+ ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
@@ -341,15 +344,15 @@
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
- pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
+ pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref]
+ pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
@@ -358,10 +361,12 @@
pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:04:05.0: [4444:0016] type 0 class 0x000400
+ pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
@@ -394,7 +399,7 @@
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
- reserve RAM buffer: 00000000bd94d000 - 00000000bfffffff
+ reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
@@ -404,6 +409,12 @@
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
+ Switched to NOHz mode on CPU #5
+ Switched to NOHz mode on CPU #0
+ Switched to NOHz mode on CPU #4
+ Switched to NOHz mode on CPU #1
+ Switched to NOHz mode on CPU #2
+ Switched to NOHz mode on CPU #3
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
@@ -414,14 +425,8 @@
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
- Switched to NOHz mode on CPU #0
- Switched to NOHz mode on CPU #5
pnp 00:00: [mem 0xc0000000-0xffffffff window]
- Switched to NOHz mode on CPU #1
pnp 00:00: [mem 0x00000000 window]
- Switched to NOHz mode on CPU #3
- Switched to NOHz mode on CPU #4
- Switched to NOHz mode on CPU #2
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
@@ -546,7 +551,7 @@
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem disabled]
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
@@ -554,7 +559,7 @@
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
- pci 0000:00:14.4: bridge window [mem pref disabled]
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
@@ -572,8 +577,9 @@
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
+ pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
@@ -599,7 +605,7 @@
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
- type=2000 audit(1315436729.210:1): initialized
+ type=2000 audit(1318777524.880:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
@@ -641,23 +647,23 @@
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
+ ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
- ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
- ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
+ ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
@@ -668,10 +674,10 @@
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
+ ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
@@ -680,21 +686,21 @@
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
- ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
+ ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
- Refined TSC clocksource calibration: 3210.781 MHz.
- Switching to clocksource tsc
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
+ Refined TSC clocksource calibration: 3210.779 MHz.
+ Switching to clocksource tsc
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
@@ -715,8 +721,8 @@
powernow-k8: 3 : pstate 3 (800 MHz)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
- Magic number: 11:497:99
- rtc_cmos 00:05: setting system clock to 2011-09-07 23:05:31 UTC (1315436731)
+ Magic number: 15:330:83
+ rtc_cmos 00:05: setting system clock to 2011-10-16 15:05:26 UTC (1318777526)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 956k freed
@@ -733,28 +739,6 @@
vga16fb: mapped to 0xffff8800000a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
- usb 3-1: new high speed USB device using ehci_hcd and address 2
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: new high speed USB device using ehci_hcd and address 3
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: device descriptor read/64, error -32
- usb 3-1: new high speed USB device using ehci_hcd and address 4
- usb 3-1: device not accepting address 4, error -32
- usb 3-1: new high speed USB device using ehci_hcd and address 5
- usb 3-1: device not accepting address 5, error -32
- hub 3-0:1.0: unable to enumerate USB device on port 1
- usb 7-1: new full speed USB device using ohci_hcd and address 2
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: new full speed USB device using ohci_hcd and address 3
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: device descriptor read/64, error -32
- usb 7-1: new full speed USB device using ohci_hcd and address 4
- usb 7-1: device not accepting address 4, error -32
- usb 7-1: new full speed USB device using ohci_hcd and address 5
- usb 7-1: device not accepting address 5, error -32
- hub 7-0:1.0: unable to enumerate USB device on port 1
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
@@ -772,12 +756,18 @@
r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:02:00.0: irq 72 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72
+ r8169 0000:02:00.0: PCI INT A disabled
+ r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
+ r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
+ r8169 0000:02:00.0: setting latency timer to 64
+ r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
+ r8169 0000:02:00.0: irq 72 for MSI/MSI-X
+ r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90011794000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- usbcore: deregistering interface driver usb-storage
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
@@ -797,13 +787,11 @@
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+ ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
- ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+ ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
@@ -811,6 +799,8 @@
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+ ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
+ ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
@@ -818,24 +808,10 @@
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata5.00: ATA-7: HDS725050KLA360, K2AOAH0A, max UDMA/133
- ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5.00: configured for UDMA/133
- scsi 4:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5
- sd 4:0:0:0: Attached scsi generic sg2 type 0
- sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 4:0:0:0: [sdc] Write Protect is off
- sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
sd 1:0:0:0: [sdb] Attached SCSI disk
- sdc: sdc1 sdc2 sdc4
- sd 4:0:0:0: [sdc] Attached SCSI disk
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
NTFS driver 2.1.30 [Flags: R/O MODULE].
Btrfs loaded
JFS: nTxBlock = 8192, nTxLock = 65536
@@ -883,12 +859,6 @@
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
@@ -904,14 +874,28 @@
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc1): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
- EXT3-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT2-fs (sdc2): error: couldn't mount because of unsupported optional features (240)
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts:
-
-
+ EXT3-fs (md126): error: couldn't mount because of unsupported optional features (240)
+ EXT2-fs (md126): error: couldn't mount because of unsupported optional features (240)
+ EXT4-fs (md126): mounted filesystem with ordered data mode. Opts:
+ usb 3-2: new high speed USB device using ehci_hcd and address 2
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: new high speed USB device using ehci_hcd and address 3
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: device descriptor read/64, error -32
+ usb 3-2: new high speed USB device using ehci_hcd and address 4
+ usb 3-2: device not accepting address 4, error -32
+ usb 3-2: new high speed USB device using ehci_hcd and address 5
+ usb 3-2: device not accepting address 5, error -32
+ hub 3-0:1.0: unable to enumerate USB device on port 2
+ usb 7-2: new full speed USB device using ohci_hcd and address 2
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: new full speed USB device using ohci_hcd and address 3
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: device descriptor read/64, error -32
+ usb 7-2: new full speed USB device using ohci_hcd and address 4
+ usb 7-2: device not accepting address 4, error -32
+ usb 7-2: new full speed USB device using ohci_hcd and address 5
+ usb 7-2: device not accepting address 5, error -32
+ hub 7-0:1.0: unable to enumerate USB device on port 2
[-- Attachment #3: dmesg.32.diff --]
[-- Type: text/x-patch, Size: 37984 bytes --]
--- dmesg_32.v2 2011-10-19 10:22:14.284864445 +0200
+++ dmesg_32.v1 2011-10-19 10:21:55.828850426 +0200
@@ -1,22 +1,22 @@
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
- Linux version 2.6.38-11-generic-pae (buildd@rothera) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 (Ubuntu 2.6.38-11.48-generic-pae 2.6.38.8)
+ Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000bd94d000 (usable)
- BIOS-e820: 00000000bd94d000 - 00000000bd99c000 (ACPI NVS)
- BIOS-e820: 00000000bd99c000 - 00000000bd9a4000 (ACPI data)
- BIOS-e820: 00000000bd9a4000 - 00000000bdadc000 (reserved)
- BIOS-e820: 00000000bdadc000 - 00000000bdaed000 (ACPI NVS)
- BIOS-e820: 00000000bdaed000 - 00000000bdb00000 (reserved)
- BIOS-e820: 00000000bdb00000 - 00000000bdb02000 (ACPI NVS)
- BIOS-e820: 00000000bdb02000 - 00000000bdb0b000 (reserved)
- BIOS-e820: 00000000bdb0b000 - 00000000bdb11000 (ACPI NVS)
- BIOS-e820: 00000000bdb11000 - 00000000bdb70000 (reserved)
- BIOS-e820: 00000000bdb70000 - 00000000bdd73000 (ACPI NVS)
- BIOS-e820: 00000000bdd73000 - 00000000bdf00000 (usable)
+ BIOS-e820: 0000000000100000 - 00000000bd94e000 (usable)
+ BIOS-e820: 00000000bd94e000 - 00000000bd99d000 (ACPI NVS)
+ BIOS-e820: 00000000bd99d000 - 00000000bd9a6000 (ACPI data)
+ BIOS-e820: 00000000bd9a6000 - 00000000bdade000 (reserved)
+ BIOS-e820: 00000000bdade000 - 00000000bdaef000 (ACPI NVS)
+ BIOS-e820: 00000000bdaef000 - 00000000bdb02000 (reserved)
+ BIOS-e820: 00000000bdb02000 - 00000000bdb04000 (ACPI NVS)
+ BIOS-e820: 00000000bdb04000 - 00000000bdb0d000 (reserved)
+ BIOS-e820: 00000000bdb0d000 - 00000000bdb13000 (ACPI NVS)
+ BIOS-e820: 00000000bdb13000 - 00000000bdb75000 (reserved)
+ BIOS-e820: 00000000bdb75000 - 00000000bdd78000 (ACPI NVS)
+ BIOS-e820: 00000000bdd78000 - 00000000bdf00000 (usable)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
@@ -26,12 +26,13 @@
BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100001000 - 0000000240000000 (usable)
- NX (Execute Disable) protection: active
+ Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
+ NX (Execute Disable) protection: approximated by x86 segment limits
DMI 2.7 present.
- DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0503 05/30/2011
+ DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97, BIOS 0705 08/22/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x240000 max_arch_pfn = 0x1000000
+ last_pfn = 0xbdf00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
@@ -40,10 +41,10 @@
D1000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
- 0 base 000000000000 mask FFFF00000000 write-back
- 1 base 0000BDF00000 mask FFFFFFF00000 uncachable
- 2 base 0000BE000000 mask FFFFFE000000 uncachable
- 3 base 0000C0000000 mask FFFFC0000000 uncachable
+ 0 base 000000000000 mask FFFF80000000 write-back
+ 1 base 000080000000 mask FFFFC0000000 write-back
+ 2 base 0000BDF00000 mask FFFFFFF00000 uncachable
+ 3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
@@ -51,47 +52,48 @@
TOM2: 0000000240000000 aka 9216M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bdf00000 - 0000000100000000 (usable) ==> (reserved)
- initial memory mapped : 0 - 01e00000
- init_memory_mapping: 0000000000000000-0000000037bfe000
- 0000000000 - 0000200000 page 4k
- 0000200000 - 0037a00000 page 2M
- 0037a00000 - 0037bfe000 page 4k
- kernel direct mapping tables up to 37bfe000 @ 1dfb000-1e00000
- RAMDISK: 366c6000 - 3735b000
+ initial memory mapped : 0 - 01c00000
+ init_memory_mapping: 0000000000000000-00000000377fe000
+ 0000000000 - 0000400000 page 4k
+ 0000400000 - 0037400000 page 2M
+ 0037400000 - 00377fe000 page 4k
+ kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
+ RAMDISK: 7f862000 - 80000000
+ Allocated new RAMDISK: 37060000 - 377fdfc7
+ Move RAMDISK from 000000007f862000 - 000000007fffffc6 to 37060000 - 377fdfc6
ACPI: RSDP 000f0450 00024 (v02 ALASKA)
- ACPI: XSDT bd99c068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
- ACPI: FACP bd9a2a68 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: XSDT bd99d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: FACP bd9a4038 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
- ACPI: DSDT bd99c140 06924 (v02 ALASKA A M I 00000000 INTL 20051117)
- ACPI: FACS bdb0bf80 00040
- ACPI: APIC bd9a2b60 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
- ACPI: MCFG bd9a2c00 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
- ACPI: HPET bd9a2c40 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
- ACPI: SSDT bd9a2c78 00DDA (v01 AMD POWERNOW 00000001 AMD 00000001)
+ ACPI: DSDT bd99d140 06EF1 (v02 ALASKA A M I 00000000 INTL 20051117)
+ ACPI: FACS bdb0df80 00040
+ ACPI: APIC bd9a4130 0009E (v03 ALASKA A M I 01072009 AMI 00010013)
+ ACPI: MCFG bd9a41d0 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
+ ACPI: HPET bd9a4210 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
+ ACPI: SSDT bd9a4248 00E10 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
- 8324MB HIGHMEM available.
- 891MB LOWMEM available.
- mapped low ram: 0 - 37bfe000
- low ram: 0 - 37bfe000
+ 2151MB HIGHMEM available.
+ 887MB LOWMEM available.
+ mapped low ram: 0 - 377fe000
+ low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x00037bfe
- HighMem 0x00037bfe -> 0x00240000
+ Normal 0x00001000 -> 0x000377fe
+ HighMem 0x000377fe -> 0x000bdf00
Movable zone start PFN for each node
- early_node_map[4] active PFN ranges
+ early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x000bd94d
- 0: 0x000bdd73 -> 0x000bdf00
- 0: 0x00100001 -> 0x00240000
- On node 0 totalpages: 2087526
- free_area_init_node: node 0, pgdat c17bac40, node_mem_map f1ec6200
+ 0: 0x00000100 -> 0x000bd94e
+ 0: 0x000bdd78 -> 0x000bdf00
+ On node 0 totalpages: 776803
+ free_area_init_node: node 0, pgdat c1784100, node_mem_map f589f200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
- Normal zone: 1752 pages used for memmap
- Normal zone: 222502 pages, LIFO batch:31
- HighMem zone: 16649 pages used for memmap
- HighMem zone: 1842642 pages, LIFO batch:31
+ Normal zone: 1744 pages used for memmap
+ Normal zone: 221486 pages, LIFO batch:31
+ HighMem zone: 4303 pages used for memmap
+ HighMem zone: 545289 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
@@ -124,43 +126,41 @@
Allocating PCI resources starting at bdf00000 (gap: bdf00000:3a100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 13 pages/cpu @f7800000 s32320 r0 d20928 u262144
- pcpu-alloc: s32320 r0 d20928 u262144 alloc=1*2097152
+ PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448 u524288
+ pcpu-alloc: s28800 r0 d24448 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2069093
- Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic-pae root=UUID=6d351741-09db-4c02-8a37-6d7910d9d4da ro quiet splash vt.handoff=7
+ Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770724
+ Kernel command line: tasks=standard pkgsel/language-pack-patterns= pkgsel/install-language-support=true vga=normal initrd=/images/ubuntu/11.04/mini-iso/initrd.gz -- quiet BOOT_IMAGE=/images/ubuntu/11.04/mini-iso/linux
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
- allocated 47185600 bytes of page_cgroup
+ allocated 15559360 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
- Initializing HighMem for node 0 (00037bfe:00240000)
- Memory: 8206480k/9437184k available (5351k kernel code, 143624k reserved, 2597k data, 720k init, 7437164k highmem)
+ Initializing HighMem for node 0 (000377fe:000bdf00)
+ Memory: 3049236k/3111936k available (5188k kernel code, 57976k reserved, 2540k data, 700k init, 2198368k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
- pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
- vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
- .init : 0xc17c4000 - 0xc1878000 ( 720 kB)
- .data : 0xc1539e95 - 0xc17c35c0 (2597 kB)
- .text : 0xc1000000 - 0xc1539e95 (5351 kB)
+ pkmap : 0xff800000 - 0xffc00000 (4096 kB)
+ vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
+ lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
+ .init : 0xc178d000 - 0xc183c000 ( 700 kB)
+ .data : 0xc15112a1 - 0xc178c480 (2540 kB)
+ .text : 0xc1000000 - 0xc15112a1 (5188 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304 nr_irqs:1288 16
- CPU 0 irqstacks, hard=f740a000 soft=f740c000
+ CPU 0 irqstacks, hard=f400a000 soft=f400c000
Extended CMOS year: 2000
- spurious 8259A interrupt: IRQ7.
- vt handoff: transparent VT on vt#7
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
- Detected 3210.863 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.72 BogoMIPS (lpj=12843452)
+ Detected 3210.741 MHz processor.
+ Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.48 BogoMIPS (lpj=12842964)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
@@ -179,7 +179,7 @@
mce: CPU supports 6 MCE banks
using C1E aware idle routine
ACPI: Core revision 20110112
- ftrace: allocating 24259 entries in 48 pages
+ ftrace: allocating 23640 entries in 47 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X6 1090T Processor stepping 00
@@ -191,33 +191,33 @@
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
- CPU 1 irqstacks, hard=f74ae000 soft=f74b8000
+ CPU 1 irqstacks, hard=f40ae000 soft=f40b8000
Booting Node 0, Processors #1
Initializing CPU#1
System has AMD C1E enabled
Switch to broadcast mode on CPU1
- CPU 2 irqstacks, hard=f74e2000 soft=f74e4000
+ CPU 2 irqstacks, hard=f40e2000 soft=f40e4000
#2
Initializing CPU#2
Switch to broadcast mode on CPU2
- CPU 3 irqstacks, hard=f74ee000 soft=f74f0000
+ CPU 3 irqstacks, hard=f40ee000 soft=f40f0000
#3
Initializing CPU#3
Switch to broadcast mode on CPU3
- CPU 4 irqstacks, hard=f7506000 soft=f7508000
+ CPU 4 irqstacks, hard=f4106000 soft=f4108000
#4
Initializing CPU#4
Switch to broadcast mode on CPU4
- CPU 5 irqstacks, hard=f7526000 soft=f7528000
+ CPU 5 irqstacks, hard=f4126000 soft=f4128000
#5
Initializing CPU#5
Brought up 6 CPUs
- Total of 6 processors activated (38529.53 BogoMIPS).
+ Total of 6 processors activated (38529.97 BogoMIPS).
Switch to broadcast mode on CPU5
Switch to broadcast mode on CPU0
devtmpfs: initialized
print_constraints: dummy:
- Time: 22:52:03 Date: 09/07/11
+ Time: 14:56:27 Date: 10/16/11
NET: Registered protocol family 16
EISA bus registered
node 0 link 0: io port [d000, ffff]
@@ -229,7 +229,6 @@
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xc0000000-0xdfffffff]
bus: 00 index 2 [mem 0xf0000000-0xffffffff]
- bus: 00 index 3 [mem 0x240000000-0xfcffffffff]
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
@@ -237,9 +236,12 @@
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
+ mtrr: your CPUs had inconsistent fixed MTRR settings
+ mtrr: probably your BIOS does not setup all CPUs.
+ mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
- ACPI: Executed 3 blocks of module-level executable AML code
+ ACPI: Executed 2 blocks of module-level executable AML code
ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359)
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110112/nsinit-349)
ACPI: Interpreter enabled
@@ -327,27 +329,30 @@
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
- pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
- pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
+ pci 0000:02:00.0: reg 18: [mem 0xd4004000-0xd4004fff 64bit pref]
+ pci 0000:02:00.0: reg 20: [mem 0xd4000000-0xd4003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe907fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
+ Freeing initrd memory: 7800k freed
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xfff000-0x0000] (disabled)
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:04:05.0: [4444:0016] type 0 class 0x000400
+ pci 0000:04:05.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
@@ -381,7 +386,7 @@
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
- reserve RAM buffer: 00000000bd94d000 - 00000000bfffffff
+ reserve RAM buffer: 00000000bd94e000 - 00000000bfffffff
reserve RAM buffer: 00000000bdf00000 - 00000000bfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
@@ -390,12 +395,12 @@
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
- Switched to NOHz mode on CPU #1
- Switched to NOHz mode on CPU #3
- Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #5
- Switched to NOHz mode on CPU #0
+ Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #4
+ Switched to NOHz mode on CPU #0
+ Switched to NOHz mode on CPU #3
+ Switched to NOHz mode on CPU #1
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
@@ -427,7 +432,7 @@
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
- pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
+ pnp 00:02: [io 0x0000-0xffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
@@ -468,9 +473,9 @@
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
+ pnp 00:03: [io 0x0000-0xffffffff disabled]
pnp 00:03: [io 0x0290-0x02af]
- pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
+ pnp 00:03: [io 0x0000-0xffffffff disabled]
system 00:03: [io 0x0290-0x02af] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
@@ -516,9 +521,9 @@
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
+ pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
+ pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
pnp 00:0e: [mem 0xfec20000-0xfec200ff]
system 00:0e: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
@@ -534,7 +539,7 @@
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem disabled]
- pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci 0000:00:04.0: bridge window [mem 0xd4000000-0xd40fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xfe900000-0xfe9fffff]
@@ -542,7 +547,7 @@
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
- pci 0000:00:14.4: bridge window [mem pref disabled]
+ pci 0000:00:14.4: bridge window [mem 0xd0000000-0xd3ffffff pref]
pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
@@ -560,8 +565,9 @@
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
+ pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd40fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
+ pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd3ffffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
@@ -578,18 +584,17 @@
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
- Freeing initrd memory: 12884k freed
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
cpufreq-nforce2: No nForce2 chipset.
audit: initializing netlink socket (disabled)
- type=2000 audit(1315435924.524:1): initialized
+ type=2000 audit(1318777072.293:1): initialized
highmem bounce pool size: 64 pages
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
+ HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.16)
- msgmni has been set to 1527
+ msgmni has been set to 1677
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
@@ -628,23 +633,23 @@
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb07000
+ ehci_hcd 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
- ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+ ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
- ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb04000
+ ehci_hcd 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
@@ -655,10 +660,10 @@
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb0a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb08000
+ ohci_hcd 0000:00:13.0: irq 20, io mem 0xfeb08000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
@@ -667,10 +672,10 @@
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb06000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
- ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+ ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
- ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb05000
+ ohci_hcd 0000:00:16.0: irq 22, io mem 0xfeb05000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
@@ -711,230 +716,49 @@
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
- Magic number: 11:218:906
- rtc_cmos 00:05: setting system clock to 2011-09-07 22:52:05 UTC (1315435925)
+ Magic number: 15:601:940
+ rtc_cmos 00:05: setting system clock to 2011-10-16 14:57:54 UTC (1318777074)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
- Freeing unused kernel memory: 720k freed
- Write protecting the kernel text: 5352k
- Write protecting the kernel read-only data: 2192k
- NX-protecting the kernel data: 4888k
- <30>udev[76]: starting version 167
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
- md: linear personality registered for level -1
- md: multipath personality registered for level -4
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- xhci_hcd 0000:03:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50
- xhci_hcd 0000:03:00.0: setting latency timer to 64
- xhci_hcd 0000:03:00.0: xHCI Host Controller
- xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
- async_tx: api initialized (async)
- xor: automatically using best checksumming function: pIII_sse
+ Freeing unused kernel memory: 700k freed
+ Write protecting the kernel text: 5192k
+ Write protecting the kernel read-only data: 2148k
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:02:00.0: irq 72 for MSI/MSI-X
- r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8438000, 14:da:e9:03:e9:b7, XID 0c900800 IRQ 72
- ahci 0000:00:11.0: version 3.0
- ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
- ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
- ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
- ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
- ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
- ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
- pIII_sse : 12815.000 MB/sec
- xor: using function: pIII_sse (12815.000 MB/sec)
- usb 3-2: new high speed USB device using ehci_hcd and address 2
- xhci_hcd 0000:03:00.0: irq 50, io mem 0xfe900000
- xhci_hcd 0000:03:00.0: irq 73 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 74 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 75 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 76 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 77 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 78 for MSI/MSI-X
- xhci_hcd 0000:03:00.0: irq 79 for MSI/MSI-X
- usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 8-0:1.0: USB hub found
- hub 8-0:1.0: 4 ports detected
- Refined TSC clocksource calibration: 3210.781 MHz.
+ input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
+ r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf800e000, 14:da:e9:03:e9:b7, XID 0c900880 IRQ 72
+ Refined TSC clocksource calibration: 3210.793 MHz.
Switching to clocksource tsc
- usbcore: registered new interface driver uas
- ata6: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link down (SStatus 0 SControl 300)
- ata3: SATA link down (SStatus 0 SControl 300)
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata5.00: ATA-7: HDS725050KLA360, K2AOAH0A, max UDMA/133
- ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5.00: configured for UDMA/133
- ata1.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
- ata1.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata2.00: ATA-8: WDC WD3000HLFS-01G6U4, 04.04V06, max UDMA/133
- ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata2.00: configured for UDMA/133
- scsi 1:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 1:0:0:0: [sdb] 586072368 512-byte logical blocks: (300 GB/279 GiB)
- sd 1:0:0:0: [sdb] Write Protect is off
- sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- scsi 4:0:0:0: Direct-Access ATA HDS725050KLA360 K2AO PQ: 0 ANSI: 5
- sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- sd 4:0:0:0: Attached scsi generic sg2 type 0
- sd 4:0:0:0: [sdc] Write Protect is off
- sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
- sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
- sd 0:0:0:0: [sda] Attached SCSI disk
- sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
- sd 1:0:0:0: [sdb] Attached SCSI disk
- sdc: sdc1 sdc2 sdc4
- sd 4:0:0:0: [sdc] Attached SCSI disk
+ vga16fb: initializing
+ vga16fb: mapped to 0xc00a0000
+ Console: switching to colour frame buffer device 80x30
+ fb0: VGA16 VGA frame buffer device
Initializing USB Mass Storage driver...
- scsi6 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
- raid6: int32x1 1564 MB/s
- md: bind<sdb3>
- md: bind<sdb4>
- md: bind<sdb5>
- raid6: int32x2 1621 MB/s
- md: bind<sdb6>
- raid6: int32x4 1233 MB/s
- raid6: int32x8 954 MB/s
- raid6: mmxx1 2958 MB/s
- raid6: mmxx2 5559 MB/s
- raid6: sse1x1 2490 MB/s
- raid6: sse1x2 3934 MB/s
- raid6: sse2x1 4696 MB/s
- raid6: sse2x2 7811 MB/s
- raid6: using algorithm sse2x2 (7811 MB/s)
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- md: raid10 personality registered for level 10
- md: bind<sda6>
- bio: create slab <bio-1> at 1
- md/raid10:md124: active with 2 out of 2 devices
- md124: detected capacity change from 0 to 233556410368
- md124: unknown partition table
- EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
- md: bind<sda4>
- md/raid10:md126: active with 2 out of 2 devices
- md126: detected capacity change from 0 to 17453285376
- md: bind<sda5>
- md: md123 stopped.
- md: unbind<sda5>
- md: export_rdev(sda5)
- md: array md127 already has disks!
- scsi 6:0:0:0: Direct-Access WG Corner Office 8.02 PQ: 0 ANSI: 0 CCS
- sd 6:0:0:0: Attached scsi generic sg3 type 0
- sd 6:0:0:0: [sdd] 3907583 512-byte logical blocks: (2.00 GB/1.86 GiB)
- sd 6:0:0:0: [sdd] Write Protect is off
- sd 6:0:0:0: [sdd] Mode Sense: 45 00 00 08
- sd 6:0:0:0: [sdd] Assuming drive cache: write through
- sd 6:0:0:0: [sdd] Assuming drive cache: write through
- sdd: sdd1
- sd 6:0:0:0: [sdd] Assuming drive cache: write through
- sd 6:0:0:0: [sdd] Attached SCSI removable disk
- <30>udev[376]: starting version 167
- <30>udev[392]: renamed network interface eth0 to eth2
- md126: unknown partition table
- Adding 4000180k swap on /dev/sdc4. Priority:-1 extents:1 across:4000180k
- type=1400 audit(1315435938.465:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=523 comm="apparmor_parser"
- type=1400 audit(1315435938.465:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=532 comm="apparmor_parser"
- type=1400 audit(1315435938.465:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=523 comm="apparmor_parser"
- type=1400 audit(1315435938.465:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=532 comm="apparmor_parser"
- type=1400 audit(1315435938.465:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=523 comm="apparmor_parser"
- type=1400 audit(1315435938.465:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=532 comm="apparmor_parser"
- md: bind<sda5>
- md/raid10:md125: active with 2 out of 2 devices
- md125: detected capacity change from 0 to 34907881472
- md125: unknown partition table
- md: bind<sda3>
- md/raid1:md127: active with 2 out of 2 mirrors
- md127: detected capacity change from 0 to 1090453504
- md127: unknown partition table
- lp: driver loaded but no devices found
- piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
- SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
- SP5100 TCO timer: mmio address 0xbafe00 already in use
- input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
- fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- Disabling lock debugging due to kernel taint
- [fglrx] Maximum main memory to use for locked dma buffers: 3769 MBytes.
- [fglrx] vendor: 1002 device: 6758 count: 1
- [fglrx] ioport: bar 4, base 0xe000, size: 0x100
- pci 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
- pci 0000:01:00.0: setting latency timer to 64
- [fglrx] Kernel PAT support is enabled
- [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
- HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- hda-intel: Enable sync_write for AMD chipset
- hda_codec: ALC887-VD: BIOS auto-probing.
- input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
- HDA Intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
- HDA Intel 0000:01:00.1: irq 80 for MSI/MSI-X
- HDA Intel 0000:01:00.1: setting latency timer to 64
- hda-intel: Enable sync_write for AMD chipset
- EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
- input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
- EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
- type=1400 audit(1315435941.709:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1005 comm="apparmor_parser"
- type=1400 audit(1315435941.709:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1010 comm="apparmor_parser"
- type=1400 audit(1315435941.709:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1010 comm="apparmor_parser"
- type=1400 audit(1315435941.709:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1009 comm="apparmor_parser"
- r8169 0000:02:00.0: eth2: link down
- r8169 0000:02:00.0: eth2: link down
- ADDRCONF(NETDEV_UP): eth2: link is not ready
- ppdev: user-space parallel port driver
- fglrx_pci 0000:01:00.0: irq 81 for MSI/MSI-X
- [fglrx] Firegl kernel thread PID: 1375
- [fglrx] Firegl kernel thread PID: 1376
- [fglrx] Firegl kernel thread PID: 1377
- [fglrx] IRQ 81 Enabled
- [fglrx] Gart USWC size:1280 M.
- [fglrx] Gart cacheable size:508 M.
- [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
- [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
- EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
- EXT4-fs (sdc2): re-mounted. Opts: commit=0
- r8169 0000:02:00.0: eth2: link up
- ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
- hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
- EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro,commit=0
- EXT4-fs (sdc2): re-mounted. Opts: commit=0
- eth2: no IPv6 routers present
- usb 3-2: USB disconnect, address 2
- usb 4-1: new full speed USB device using ohci_hcd and address 2
- input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input6
- generic-usb 0003:1532:0101.0001: input,hidraw0: USB HID v10.01 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input0
- input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input7
- generic-usb 0003:1532:0101.0002: input,hidraw1: USB HID v10.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:12.0-1/input1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
-
-
-
+ Intel ISA PCIC probe: not found.
+ r8169 0000:02:00.0: eth0: link down
+ r8169 0000:02:00.0: eth0: link down
+ ADDRCONF(NETDEV_UP): eth0: link is not ready
+ r8169 0000:02:00.0: eth0: link down
+ ADDRCONF(NETDEV_UP): eth0: link is not ready
+ r8169 0000:02:00.0: eth0: link up
+ ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+ usb 3-2: new high speed USB device using ehci_hcd and address 2
+ scsi0 : usb-storage 3-2:1.0
+ scsi 0:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
+ sd 0:0:0:0: Attached scsi generic sg0 type 0
+ sd 0:0:0:0: [sda] 983808 512-byte logical blocks: (503 MB/480 MiB)
+ sd 0:0:0:0: [sda] Write Protect is off
+ sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
+ sd 0:0:0:0: [sda] Asking for cache data failed
+ sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sd 0:0:0:0: [sda] Asking for cache data failed
+ sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sda: sda1
+ sd 0:0:0:0: [sda] Asking for cache data failed
+ sd 0:0:0:0: [sda] Assuming drive cache: write through
+ sd 0:0:0:0: [sda] Attached SCSI removable disk
next reply other threads:[~2011-10-19 8:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-19 8:59 Oliver Schinagl [this message]
2011-10-19 15:39 ` [Bug 42502] PROBLEM: USB 1.1 (and up) not working on AMD R900 Series chipset Bjorn Helgaas
2011-10-20 7:01 ` oliver
2011-11-28 20:45 ` Oliver Schinagl
[not found] <bug-42502-20552@https.bugzilla.kernel.org/>
[not found] ` <201109072200.p87M0G5V011358@demeter1.kernel.org>
2011-09-08 0:00 ` Oliver Schinagl
2011-09-13 17:54 ` Bjorn Helgaas
2011-09-22 18:17 ` Oliver Schinagl
2011-09-22 18:17 ` Oliver Schinagl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E9E916A.4050007@schinagl.nl \
--to=oliver@schinagl.nl \
--cc=bhelgaas@google.com \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.