From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kukjin Kim Subject: Re: [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards Date: Mon, 24 Oct 2011 15:02:44 +0200 Message-ID: <4EA561F4.5010606@samsung.com> References: <1318342396-26178-1-git-send-email-thomas.abraham@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail-bw0-f46.google.com ([209.85.214.46]:52801 "EHLO mail-bw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932309Ab1JXNCt (ORCPT ); Mon, 24 Oct 2011 09:02:49 -0400 Received: by bkbzt19 with SMTP id zt19so8166241bkb.19 for ; Mon, 24 Oct 2011 06:02:47 -0700 (PDT) In-Reply-To: <1318342396-26178-1-git-send-email-thomas.abraham@linaro.org> Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-samsung-soc@vger.kernel.org To: Thomas Abraham Cc: devicetree-discuss@lists.ozlabs.org, linux-samsung-soc@vger.kernel.org, grant.likely@secretlab.ca, rob.herring@calxeda.com, arnd@arndb.de, kgene.kim@samsung.com, linux-arm-kernel@lists.infradead.org, patches@linaro.org On 10/11/11 16:13, Thomas Abraham wrote: > This patchset adds a new basic device tree enabled machine/board file which is > based on the Samsung's Exynos4 family of SoC's. Also included in this patchset is the > dts file for Exynos4210 SoC, Samsung's SMDKV310 board and Insignal's Origen board. > > The Exynos4210 dts file includes support for IRQ, GPIO, WDT, RTC, UART, SDHCI, Keypad, > DMA and I2C controllers. As device tree coverage for Exynos4210 increases, additional > device nodes to represent the controllers should be added. > > The device tree enabled machine file enables boot on two boards based on the > Exynos4210 SoC. This provides a starting point to add additional device tree support > on these boards, migrate other existing Exynos4 based boards to use device tree > and enable device tree based boot on new upcoming boards. > > This patchset has been tested on the following tree: > https://github.com/kgene/linux-samsung.git branch: for-next > > Thomas Abraham (2): > ARM: Samsung: Add Exynos4 device tree enabled board file > ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board > > .../devicetree/bindings/arm/insignal-boards.txt | 8 + > .../devicetree/bindings/arm/samsung-boards.txt | 8 + > arch/arm/boot/dts/exynos4210-origen.dts | 137 +++++++ > arch/arm/boot/dts/exynos4210-smdkv310.dts | 182 +++++++++ > arch/arm/boot/dts/exynos4210.dtsi | 403 ++++++++++++++++++++ > arch/arm/mach-exynos4/Kconfig | 14 + > arch/arm/mach-exynos4/Makefile | 2 + > arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 ++++ > 8 files changed, 839 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/insignal-boards.txt > create mode 100644 Documentation/devicetree/bindings/arm/samsung-boards.txt > create mode 100644 arch/arm/boot/dts/exynos4210-origen.dts > create mode 100644 arch/arm/boot/dts/exynos4210-smdkv310.dts > create mode 100644 arch/arm/boot/dts/exynos4210.dtsi > create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c Applied. Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. From mboxrd@z Thu Jan 1 00:00:00 1970 From: kgene.kim@samsung.com (Kukjin Kim) Date: Mon, 24 Oct 2011 15:02:44 +0200 Subject: [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards In-Reply-To: <1318342396-26178-1-git-send-email-thomas.abraham@linaro.org> References: <1318342396-26178-1-git-send-email-thomas.abraham@linaro.org> Message-ID: <4EA561F4.5010606@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10/11/11 16:13, Thomas Abraham wrote: > This patchset adds a new basic device tree enabled machine/board file which is > based on the Samsung's Exynos4 family of SoC's. Also included in this patchset is the > dts file for Exynos4210 SoC, Samsung's SMDKV310 board and Insignal's Origen board. > > The Exynos4210 dts file includes support for IRQ, GPIO, WDT, RTC, UART, SDHCI, Keypad, > DMA and I2C controllers. As device tree coverage for Exynos4210 increases, additional > device nodes to represent the controllers should be added. > > The device tree enabled machine file enables boot on two boards based on the > Exynos4210 SoC. This provides a starting point to add additional device tree support > on these boards, migrate other existing Exynos4 based boards to use device tree > and enable device tree based boot on new upcoming boards. > > This patchset has been tested on the following tree: > https://github.com/kgene/linux-samsung.git branch: for-next > > Thomas Abraham (2): > ARM: Samsung: Add Exynos4 device tree enabled board file > ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board > > .../devicetree/bindings/arm/insignal-boards.txt | 8 + > .../devicetree/bindings/arm/samsung-boards.txt | 8 + > arch/arm/boot/dts/exynos4210-origen.dts | 137 +++++++ > arch/arm/boot/dts/exynos4210-smdkv310.dts | 182 +++++++++ > arch/arm/boot/dts/exynos4210.dtsi | 403 ++++++++++++++++++++ > arch/arm/mach-exynos4/Kconfig | 14 + > arch/arm/mach-exynos4/Makefile | 2 + > arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 ++++ > 8 files changed, 839 insertions(+), 0 deletions(-) > create mode 100644 Documentation/devicetree/bindings/arm/insignal-boards.txt > create mode 100644 Documentation/devicetree/bindings/arm/samsung-boards.txt > create mode 100644 arch/arm/boot/dts/exynos4210-origen.dts > create mode 100644 arch/arm/boot/dts/exynos4210-smdkv310.dts > create mode 100644 arch/arm/boot/dts/exynos4210.dtsi > create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c Applied. Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.