From: Arseny Klimovsky <arseny.klimovsky@gmail.com>
To: b43-dev@lists.infradead.org
Subject: Problem with BCM4312 and EAP mode
Date: Tue, 25 Oct 2011 00:10:01 +0400 [thread overview]
Message-ID: <4EA5C619.4010408@gmail.com> (raw)
Hello, list
I'm using b43 driver on laptop Dell Latitude E4300. It works great at
home with WPA-PSK mode, thank you!
But I cannot use it in a WPA-EAP mode.
The system log is full with such errors when I try to connect to the net:
Oct 24 11:32:26 odette-laptop kernel: [596357.880058] b43-phy0 ERROR:
MAC suspend failed
It is Ubuntu 10.04.3 with new vanilla kernel
$ uname -a
Linux odette-laptop 3.0.4-030004-generic #201108301138 SMP Tue Aug 30
11:42:30 UTC 2011 x86_64 GNU/Linux
$ lspci -v
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Dell Device 000c
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information <?>
Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [13c] Virtual Channel <?>
Capabilities: [160] Device Serial Number 60-0c-59-ff-ff-76-4f-97
Capabilities: [16c] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
I've seen a similar message in the list:
http://lists.infradead.org/pipermail/b43-dev/2011-September/002090.html
What information should I provide to help you to debug the problem?
--
Arseny Klimovsky
reply other threads:[~2011-10-24 20:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA5C619.4010408@gmail.com \
--to=arseny.klimovsky@gmail.com \
--cc=b43-dev@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.