From: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
To: dledford@redhat.com
Cc: akpm@linux-foundation.org, torvalds@linux-foundation.org,
linux-kernel@vger.kernel.org, joe.korty@ccur.com,
amwang@redhat.com
Subject: [PATCH 7/4] ipc/mqueue: separate mqueue default value from maximum value
Date: Wed, 26 Oct 2011 11:38:35 -0400 [thread overview]
Message-ID: <4EA8297B.6020403@gmail.com> (raw)
In-Reply-To: <4EA828E4.1070409@gmail.com>
commit b231cca438 (message queues: increase range limits)
changed mqueue default value when attr parameter is specified NULL
from hard coded value to fs.mqueue.{msg,msgsize}_max sysctl value.
This made large side effect. When user need to use two mqueue
applications 1) using !NULL attr parameter and it require big
message size and 2) using NULL attr parameter and only need small
size message, app (1) require to raise fs.mqueue.msgsize_max and
app (2) consume large memory size even though it doesn't need.
Doug Ledford propsed to switch back it to static hard coded value.
However it also has a compatibility problem. Some applications might
started depend on the default value is tunable.
The solution is to separate default value from maximum value.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Joe Korty <joe.korty@ccur.com>
---
Documentation/sysctl/fs.txt | 7 +++++++
include/linux/ipc_namespace.h | 3 +++
ipc/mq_sysctl.c | 18 ++++++++++++++++++
ipc/mqueue.c | 9 ++++++---
ipc/msgutil.c | 2 ++
5 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt
index 88fd7f5..13d6166 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.txt
@@ -225,6 +225,13 @@ a queue must be less or equal then msg_max.
maximum message size value (it is every message queue's attribute set during
its creation).
+/proc/sys/fs/mqueue/msg_default is a read/write file for setting/getting the
+default number of messages in a queue value if attr parameter of mq_open(2) is
+NULL. If it exceed msg_max, the default value is initialized msg_max.
+
+/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting
+the default message size value if attr parameter of mq_open(2) is NULL. If it
+exceed msgsize_max, the default value is initialized msgsize_max.
4. /proc/sys/fs/epoll - Configuration options for the epoll interface
--------------------------------------------------------
diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h
index 2d7c5e0..9e25a33 100644
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -63,6 +63,9 @@ struct ipc_namespace {
unsigned int mq_msg_max; /* initialized to DFLT_MSGMAX */
unsigned int mq_msgsize_max; /* initialized to DFLT_MSGSIZEMAX */
+ unsigned int mq_msg_default;
+ unsigned int mq_msgsize_default;
+
/* user_ns which owns the ipc ns */
struct user_namespace *user_ns;
};
diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index e22336a..383d638 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -73,6 +73,24 @@ static ctl_table mq_sysctls[] = {
.extra1 = &msg_maxsize_limit_min,
.extra2 = &msg_maxsize_limit_max,
},
+ {
+ .procname = "msg_default",
+ .data = &init_ipc_ns.mq_msg_default,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_mq_dointvec_minmax,
+ .extra1 = &msg_max_limit_min,
+ .extra2 = &msg_max_limit_max,
+ },
+ {
+ .procname = "msgsize_default",
+ .data = &init_ipc_ns.mq_msgsize_default,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = proc_mq_dointvec_minmax,
+ .extra1 = &msg_maxsize_limit_min,
+ .extra2 = &msg_maxsize_limit_max,
+ },
{}
};
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 91ca145..f762fe6 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -143,9 +143,10 @@ static struct inode *mqueue_get_inode(struct super_block *sb,
info->qsize = 0;
info->user = NULL; /* set when all is ok */
memset(&info->attr, 0, sizeof(info->attr));
- info->attr.mq_maxmsg = min(ipc_ns->mq_msg_max, DFLT_MSG);
- info->attr.mq_msgsize =
- min(ipc_ns->mq_msgsize_max, DFLT_MSGSIZE);
+ info->attr.mq_maxmsg = min(ipc_ns->mq_msg_max,
+ ipc_ns->mq_msg_default);
+ info->attr.mq_msgsize = min(ipc_ns->mq_msgsize_max,
+ ipc_ns->mq_msgsize_default);
if (attr) {
info->attr.mq_maxmsg = attr->mq_maxmsg;
info->attr.mq_msgsize = attr->mq_msgsize;
@@ -1262,6 +1263,8 @@ int mq_init_ns(struct ipc_namespace *ns)
ns->mq_queues_max = DFLT_QUEUESMAX;
ns->mq_msg_max = DFLT_MSGMAX;
ns->mq_msgsize_max = DFLT_MSGSIZEMAX;
+ ns->mq_msg_default = DFLT_MSG;
+ ns->mq_msgsize_default = DFLT_MSGSIZE;
ns->mq_mnt = kern_mount_data(&mqueue_fs_type, ns);
if (IS_ERR(ns->mq_mnt)) {
diff --git a/ipc/msgutil.c b/ipc/msgutil.c
index 8b5ce5d3..a344216 100644
--- a/ipc/msgutil.c
+++ b/ipc/msgutil.c
@@ -31,6 +31,8 @@ struct ipc_namespace init_ipc_ns = {
.mq_queues_max = DFLT_QUEUESMAX,
.mq_msg_max = DFLT_MSGMAX,
.mq_msgsize_max = DFLT_MSGSIZEMAX,
+ .mq_msg_default = DFLT_MSG,
+ .mq_msgsize_default = DFLT_MSGSIZE,
#endif
.user_ns = &init_user_ns,
};
--
1.7.5.2
next prev parent reply other threads:[~2011-10-26 15:37 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-27 22:30 Various cleanups and a couple fixes to ipc/mqueue Doug Ledford
2011-09-27 22:30 ` [PATCH 1/4] ipc/mqueue: cleanup definition names and locations Doug Ledford
2011-09-27 22:30 ` [PATCH 2/4] ipc/mqueue: switch back to using non-max values on create Doug Ledford
2011-10-25 0:56 ` KOSAKI Motohiro
2011-10-26 15:36 ` KOSAKI Motohiro
[not found] ` <4EA828E4.1070409@gmail.com>
2011-10-26 15:37 ` [PATCH 5/4] ipc/mqueue: revert bump up DFLT_*MAX KOSAKI Motohiro
2011-10-26 17:28 ` Doug Ledford
2011-10-27 16:41 ` Joe Korty
2011-10-26 15:37 ` [PATCH 6/4] ipc/mqueue: don't use kmalloc(KMALLOC_MAX_SIZE) KOSAKI Motohiro
2011-10-26 17:29 ` Doug Ledford
2011-10-27 16:41 ` Joe Korty
2011-10-26 15:38 ` KOSAKI Motohiro [this message]
2011-10-26 17:31 ` [PATCH 7/4] ipc/mqueue: separate mqueue default value from maximum value Doug Ledford
2011-10-27 16:44 ` Joe Korty
2011-09-27 22:30 ` [PATCH 3/4] ipc/mqueue: enforce hard limits Doug Ledford
2011-09-27 22:30 ` [PATCH 4/4] ipc/mqueue: update maximums for the mqueue subsystem Doug Ledford
2011-10-25 1:00 ` KOSAKI Motohiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA8297B.6020403@gmail.com \
--to=kosaki.motohiro@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=amwang@redhat.com \
--cc=dledford@redhat.com \
--cc=joe.korty@ccur.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.