From mboxrd@z Thu Jan  1 00:00:00 1970
From: Helmut Raiger <helmut.raiger@hale.at>
Date: Wed, 02 Nov 2011 08:02:43 +0100
Subject: [U-Boot] [PATCH V2] imx: mmc: access mxcmmc from mx31 boards
In-Reply-To: <1319717957-30517-1-git-send-email-helmut.raiger@hale.at>
References: <4EA684D5.8030608@denx.de>
	<1319717957-30517-1-git-send-email-helmut.raiger@hale.at>
Message-ID: <4EB0EB13.2070404@hale.at>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10/27/2011 02:19 PM, Helmut Raiger wrote:
> This patch modifies mxcmmc.c to be used
> not only by i.MX27 but also by i.MX31 boards.
> Both use the same SD controller, but have different
> clock set-ups.
> The i.MX27 imx_get_XXXclock functions are made static to
> generic.c and a public mxc_get_clock() function
> is provided.  Pins, base address and prototypes for
> an i.MX31 specific board_init_mmc() are provided.
> Some of the i.MX27 clock getters are unused and marked
> as such to avoid warnings (./MAKEALL -s mx27), but
> the code was left in for future use.
>
> Signed-off-by: Helmut Raiger<helmut.raiger@hale.at>

I just re-titled the patch to make it visible for the imx community,
it concerns i.MX27 and i.MX31, so mmc: is probably the wrong
category anyway.

Helmut


--
Scanned by MailScanner.