From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4EB2CB84.3060004@domain.hid> Date: Thu, 03 Nov 2011 18:12:36 +0100 From: Philippe Gerum MIME-Version: 1.0 References: <20111102201210.GY30117@domain.hid> <4EB1B691.9020801@domain.hid> <20111103151353.GB30117@domain.hid> <4EB2B58F.3070600@domain.hid> <20111103161844.GC30117@domain.hid> <20111103170042.GD30117@domain.hid> In-Reply-To: <20111103170042.GD30117@domain.hid> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Adeos-main] irq related kernel crash with adeos 3.0.4 powerpc. List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: adeos-main@gna.org On 11/03/2011 06:00 PM, Lennart Sorensen wrote: > On Thu, Nov 03, 2011 at 12:18:44PM -0400, Lennart Sorensen wrote: >> On Thu, Nov 03, 2011 at 04:38:55PM +0100, Philippe Gerum wrote: >>> Thanks. Meanwhile you may want to try this one. This is aimed at fixing an issue with acking >>> cascaded IPIC irqs over the pipeline. >>> >>> http://download.gna.org/adeos/patches/v3.x/powerpc/adeos-ipipe-3.0.8-powerpc-2.13-04.patch >> >> I sure will. >> >> I do happen to have cascaded IRQs since we have an IRQ controller in an >> FPGA connected to the external IRQ lines on the 8360. >> >> I don't know if the quickengine IRQs qualify as cascaded to the ipic >> or not. They probably do. >> >> Anyhow, compiling now, should be testing in about 20 minutes or so, >> or right after lunch. > > Well that fixed the crash. > > Now I have to go figure out why the ucc_geth ports can't seem to get > link up with 3.0. But that's a different problem. > Ok, does this also happen when CONFIG_IPIPE is off? -- Philippe.