From: Hartmut Knaack <knaack.h@gmx.de>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-kernel@vger.kernel.org
Subject: [Patch 2/2] gpiolib: output basic details and consolidate gpio device drivers
Date: Sat, 05 Nov 2011 22:27:58 +0100 [thread overview]
Message-ID: <4EB5AA5E.8020707@gmx.de> (raw)
This patch removes duplicate kernel messages, which are now output by gpiolib from the following drivers:
* gpio-adp5588
* gpio-bt8xx
* gpio-cs5535
* gpio-janz-ttl
* gpio-nomadik
* gpio-pcf857x
* gpio-xilinx
* drivers/of/gpio.c (I hope that is OK with you)
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
-------------------------------------------------------------
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index 3525ad9..9ad1703 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -418,9 +418,8 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
if (ret)
goto err_irq;
- dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n",
- gc->base, gc->base + gc->ngpio - 1,
- pdata->irq_base, client->name, revid);
+ dev_info(&client->dev, "IRQ Base: %d Rev.: %d\n",
+ pdata->irq_base, revid);
if (pdata->setup) {
ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
index ec57936..5ca4098 100644
--- a/drivers/gpio/gpio-bt8xx.c
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -223,9 +223,6 @@ static int bt8xxgpio_probe(struct pci_dev *dev,
goto err_release_mem;
}
- printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
- bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
-
return 0;
err_release_mem:
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 6e16cba..693a81b 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -347,7 +347,6 @@ static int __devinit cs5535_gpio_probe(struct platform_device *pdev)
if (err)
goto release_region;
- dev_info(&pdev->dev, "GPIO support successfully loaded.\n");
return 0;
release_region:
diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c
index 813ac07..6f7fda0 100644
--- a/drivers/gpio/gpio-janz-ttl.c
+++ b/drivers/gpio/gpio-janz-ttl.c
@@ -201,8 +201,6 @@ static int __devinit ttl_probe(struct platform_device *pdev)
goto out_iounmap_regs;
}
- dev_info(&pdev->dev, "module %d: registered GPIO device\n",
- pdata->modno);
return 0;
out_iounmap_regs:
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 1ebedfb..839624f 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -1150,8 +1150,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
nmk_gpio_init_irq(nmk_chip);
- dev_info(&dev->dev, "Bits %i-%i at address %p\n",
- nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+ dev_info(&dev->dev, "at address %p\n",
+ nmk_chip->addr);
return 0;
out_free:
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 7369fdd..083bede 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -289,10 +289,7 @@ static int pcf857x_probe(struct i2c_client *client,
* methods can't be called from sleeping contexts.
*/
- dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
- gpio->chip.base,
- gpio->chip.base + gpio->chip.ngpio - 1,
- client->name,
+ dev_info(&client->dev, "%s\n",
client->irq ? " (irq ignored)" : "");
/* Let platform code set up the GPIOs and their users.
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 846fbd5..0a22418 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -205,7 +205,6 @@ static int __devinit xgpio_of_probe(struct device_node *np)
np->full_name, status);
return status;
}
- pr_info("XGpio: %s: registered\n", np->full_name);
return 0;
}
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index ef0105f..ea4f2fa 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -198,8 +198,6 @@ int of_mm_gpiochip_add(struct device_node *np,
if (ret)
goto err2;
- pr_debug("%s: registered as generic GPIO chip, base is %d\n",
- np->full_name, gc->base);
return 0;
err2:
iounmap(mm_gc->regs);
reply other threads:[~2011-11-05 21:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB5AA5E.8020707@gmx.de \
--to=knaack.h@gmx.de \
--cc=grant.likely@secretlab.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.