From: "Paweł Staszewski" <pstaszewski@itcare.pl>
To: Linux Network Development list <netdev@vger.kernel.org>,
Eric Dumazet <eric.dumazet@gmail.com>
Subject: Linux Route Cache performance tests
Date: Sun, 06 Nov 2011 16:57:22 +0100 [thread overview]
Message-ID: <4EB6AE62.5050803@itcare.pl> (raw)
Hello
I make some networking performance tests for Linux 3.1
Configuration:
Linux (pktget) ----> Linux (router) ----> Linux (Sink)
pktgen config:
clone_skb 32
pkt_size 64
delay 0
pgset "flag IPDST_RND"
pgset "dst_min 10.0.0.0"
pgset "dst_max 10.18.255.255"
pgset "config 1"
pgset "flows 256"
pgset "flowlen 8"
TX performance for this host:
eth0: RX: 0.00 P/s TX: 12346107.73 P/s TOTAL:
12346107.73 P/s
On Linux (router):
grep . /proc/sys/net/ipv4/route/*
/proc/sys/net/ipv4/route/error_burst:500
/proc/sys/net/ipv4/route/error_cost:100
grep: /proc/sys/net/ipv4/route/flush: Permission denied
/proc/sys/net/ipv4/route/gc_elasticity:4
/proc/sys/net/ipv4/route/gc_interval:60
/proc/sys/net/ipv4/route/gc_min_interval:0
/proc/sys/net/ipv4/route/gc_min_interval_ms:500
/proc/sys/net/ipv4/route/gc_thresh:2000000
/proc/sys/net/ipv4/route/gc_timeout:60
/proc/sys/net/ipv4/route/max_size:8388608
/proc/sys/net/ipv4/route/min_adv_mss:256
/proc/sys/net/ipv4/route/min_pmtu:552
/proc/sys/net/ipv4/route/mtu_expires:600
/proc/sys/net/ipv4/route/redirect_load:2
/proc/sys/net/ipv4/route/redirect_number:9
/proc/sys/net/ipv4/route/redirect_silence:2048
For the first 30secs maybee more router is forwarding ~5Mpps to the
Linux (Sink)
and some stats for this forst 30secs in attached image:
http://imageshack.us/photo/my-images/684/test1ih.png/
Left up - pktgen linux
left down - Linux router (htop)
Right up - Linux router (bwm-ng - showing pps)
Right down - Linux router (lnstat)
And all is good - performance 5Mpps until Linux router will reach ~1kk
entries
What You can see on next attached image:
http://imageshack.us/photo/my-images/24/test2id.png/
Forwarding performance drops from 5Mpps to 1,8Mpps
And after 3 - 4 minutes it will stop on 0,7Mpps
After flushing the route cache performance increase from 0.7Mpps to 6Mpps
What You can see on next attached image:
http://imageshack.us/photo/my-images/197/test3r.png/
Is it possible to turn off route cache ? and see what performance will
be without caching
Thanks
Pawel
next reply other threads:[~2011-11-06 15:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-06 15:57 Paweł Staszewski [this message]
2011-11-06 17:29 ` Linux Route Cache performance tests Eric Dumazet
2011-11-06 18:28 ` Paweł Staszewski
2011-11-06 18:48 ` Eric Dumazet
2011-11-06 19:20 ` Paweł Staszewski
2011-11-06 19:38 ` Eric Dumazet
2011-11-06 20:25 ` Paweł Staszewski
2011-11-06 21:26 ` Eric Dumazet
2011-11-06 21:57 ` Paweł Staszewski
2011-11-06 23:08 ` Eric Dumazet
2011-11-07 8:36 ` Paweł Staszewski
2011-11-07 9:08 ` Eric Dumazet
2011-11-07 9:16 ` Eric Dumazet
2011-11-07 22:12 ` Paweł Staszewski
2011-11-07 13:42 ` Ben Hutchings
2011-11-07 14:33 ` Eric Dumazet
2011-11-09 17:24 ` [PATCH net-next] ipv4: PKTINFO doesnt need dst reference Eric Dumazet
2011-11-09 21:37 ` David Miller
2011-11-09 22:03 ` Eric Dumazet
2011-11-10 0:29 ` [PATCH net-next] bnx2x: reduce skb truesize by 50% Eric Dumazet
2011-11-10 15:05 ` Eilon Greenstein
2011-11-10 15:27 ` Eric Dumazet
2011-11-10 16:27 ` Eilon Greenstein
2011-11-10 16:45 ` Eric Dumazet
2011-11-13 18:53 ` Eilon Greenstein
2011-11-13 19:42 ` Eric Dumazet
2011-11-13 20:08 ` Eilon Greenstein
2011-11-13 22:00 ` Eric Dumazet
2011-11-14 5:08 ` David Miller
2011-11-14 6:25 ` Eric Dumazet
2011-11-14 15:57 ` Eric Dumazet
2011-11-14 19:21 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB6AE62.5050803@itcare.pl \
--to=pstaszewski@itcare.pl \
--cc=eric.dumazet@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.