From mboxrd@z Thu Jan  1 00:00:00 1970
From: Helmut Raiger <helmut.raiger@hale.at>
Date: Mon, 07 Nov 2011 08:59:36 +0100
Subject: [U-Boot] [PATCH V2] imx: mmc: access mxcmmc from mx31 boards
In-Reply-To: <4EB0EB13.2070404@hale.at>
References: <4EA684D5.8030608@denx.de>
	<1319717957-30517-1-git-send-email-helmut.raiger@hale.at>
	<4EB0EB13.2070404@hale.at>
Message-ID: <4EB78FE8.5000308@hale.at>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 11/02/2011 08:02 AM, Helmut Raiger wrote:
> On 10/27/2011 02:19 PM, Helmut Raiger wrote:
>> This patch modifies mxcmmc.c to be used
>> not only by i.MX27 but also by i.MX31 boards.
>> Both use the same SD controller, but have different
>> clock set-ups.
>> The i.MX27 imx_get_XXXclock functions are made static to
>> generic.c and a public mxc_get_clock() function
>> is provided.  Pins, base address and prototypes for
>> an i.MX31 specific board_init_mmc() are provided.
>> Some of the i.MX27 clock getters are unused and marked
>> as such to avoid warnings (./MAKEALL -s mx27), but
>> the code was left in for future use.
>>
>> Signed-off-by: Helmut Raiger<helmut.raiger@hale.at>
>
> I just re-titled the patch to make it visible for the imx community,
> it concerns i.MX27 and i.MX31, so mmc: is probably the wrong
> category anyway.
>
> Helmut
Anything amiss?
Helmut


--
Scanned by MailScanner.