From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: define CONFIG_MACH_TYPE for all ronetix boards
Date: Tue, 08 Nov 2011 09:55:43 +0100 [thread overview]
Message-ID: <4EB8EE8F.9020004@aribaud.net> (raw)
In-Reply-To: <1320087260-6152-1-git-send-email-dimov@ronetix.at>
Hi Asen,
Le 31/10/2011 19:54, Asen Chavdarov Dimov a ?crit :
>
> Signed-off-by: Asen Chavdarov Dimov<dimov@ronetix.at>
> ---
> board/ronetix/pm9261/pm9261.c | 3 ---
> board/ronetix/pm9263/pm9263.c | 3 ---
> board/ronetix/pm9g45/pm9g45.c | 2 --
> include/configs/pm9261.h | 3 +++
> include/configs/pm9263.h | 3 +++
> include/configs/pm9g45.h | 3 +++
> 6 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
> index 871b94a..b26e33a 100644
> --- a/board/ronetix/pm9261/pm9261.c
> +++ b/board/ronetix/pm9261/pm9261.c
> @@ -248,9 +248,6 @@ int board_init(void)
> 1<< ATMEL_ID_PIOC,
> &pmc->pcer);
>
> - /* arch number of PM9261-Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PM9261;
> -
> /* adress of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
> index cfc9847..b0f7ea6 100644
> --- a/board/ronetix/pm9263/pm9263.c
> +++ b/board/ronetix/pm9263/pm9263.c
> @@ -349,9 +349,6 @@ int board_init(void)
> (1<< ATMEL_ID_PIOB),
> &pmc->pcer);
>
> - /* arch number of AT91SAM9263EK-Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PM9263;
> -
> /* adress of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
> index f3374a4..961d193 100644
> --- a/board/ronetix/pm9g45/pm9g45.c
> +++ b/board/ronetix/pm9g45/pm9g45.c
> @@ -139,8 +139,6 @@ int board_init(void)
> (1<< ATMEL_ID_PIOC) |
> (1<< ATMEL_ID_PIODE),&pmc->pcer);
>
> - /* arch number of AT91SAM9M10G45EK-Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
> /* adress of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
> index 89e17b8..55455e7 100644
> --- a/include/configs/pm9261.h
> +++ b/include/configs/pm9261.h
> @@ -52,6 +52,9 @@
> #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
> #define CONFIG_SYS_TEXT_BASE 0
>
> +#define MACH_TYPE_PM9261 1187
> +#define CONFIG_MACH_TYPE MACH_TYPE_PM9261
> +
> /* clocks */
> /* CKGR_MOR - enable main osc. */
> #define CONFIG_SYS_MOR_VAL \
> diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
> index 1f7543c..43104a3 100644
> --- a/include/configs/pm9263.h
> +++ b/include/configs/pm9263.h
> @@ -52,6 +52,9 @@
> #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
> #define CONFIG_SYS_TEXT_BASE 0
>
> +#define MACH_TYPE_PM9263 1475
> +#define CONFIG_MACH_TYPE MACH_TYPE_PM9263
> +
> /* clocks */
> #define CONFIG_SYS_MOR_VAL \
> (AT91_PMC_MOR_MOSCEN | \
> diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
> index acc1204..d3beaf3 100644
> --- a/include/configs/pm9g45.h
> +++ b/include/configs/pm9g45.h
> @@ -41,6 +41,9 @@
> #define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
> #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
>
> +#define MACH_TYPE_PM9G45 2672
> +#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
> +
> /* ARM asynchronous clock */
> #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2011-11-08 8:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 18:54 [U-Boot] [PATCH] ARM: define CONFIG_MACH_TYPE for all ronetix boards Asen Chavdarov Dimov
2011-11-01 11:43 ` Igor Grinberg
2011-11-08 8:55 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB8EE8F.9020004@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.