All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Bader <stefan.bader@canonical.com>
To: Greg KH <gregkh@suse.de>
Cc: linux-kernel@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	torvalds@linux-foundation.org, stable@kernel.org, lwn@lwn.net
Subject: Re: Linux 2.6.32.47
Date: Tue, 08 Nov 2011 11:39:50 +0100	[thread overview]
Message-ID: <4EB906F6.3010007@canonical.com> (raw)
In-Reply-To: <20111107213431.GA8483@kroah.com>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

On 07.11.2011 22:34, Greg KH wrote:
> I'm announcing the release of the 2.6.32.47 kernel.
> 
> All users of the 2.6.32 series must upgrade.
> 
> The updated 2.6.32.y git tree can be found at (NOTE THE ADDRESS CHANGE): 
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
> linux-2.6.32.y and can be browsed at the normal kernel.org git web
> browser: 
> http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=shortlog;h=refs/heads/linux-2.6.32.y
>
>  thanks,
> 
> greg k-h
> 
> ------------
> 
> Documentation/stable_kernel_rules.txt       |    4 Makefile
> |    2 arch/arm/mach-davinci/board-da850-evm.c     |   28 ++ 
> arch/arm/plat-mxc/include/mach/iomux-v3.h   |   10 - 
> arch/mips/alchemy/mtx-1/platform.c          |    9 
> arch/powerpc/kernel/pci_of_scan.c           |    2 
> arch/powerpc/sysdev/mpic.c                  |   17 - 
> arch/s390/kvm/kvm-s390.c                    |   14 + 
> arch/sparc/include/asm/sigcontext.h         |   14 + 
> arch/sparc/kernel/Makefile                  |    1 arch/sparc/kernel/pcic.c
> |    4 arch/sparc/kernel/signal32.c                |  184
> +++++++++++-------- arch/sparc/kernel/signal_32.c               |  172
> ++++++++---------- arch/sparc/kernel/signal_64.c               |  108
> ++++------- arch/sparc/kernel/sigutil.h                 |    9 
> arch/sparc/kernel/sigutil_32.c              |  120 ++++++++++++ 
> arch/sparc/kernel/sigutil_64.c              |   93 +++++++++ 
> arch/um/drivers/ubd_kern.c                  |   31 +++ 
> arch/x86/include/asm/processor.h            |   23 ++ 
> arch/x86/kernel/amd_iommu.c                 |    2 
> arch/x86/kernel/kprobes.c                   |    4 
> arch/x86/kernel/smpboot.c                   |   85 --------- 
> arch/x86/kvm/svm.c                          |    1 arch/x86/kvm/vmx.c
> |    1 arch/x86/xen/smp.c                          |   10 + 
> arch/x86/xen/time.c                         |    4 
> arch/x86/xen/xen-asm_32.S                   |    8 block/cfq-iosched.c
> |  264 +++++++++++++++++++++------- drivers/ata/ahci.c
> |   12 + drivers/base/sys.c                          |    6 
> drivers/block/xen-blkfront.c                |    2 
> drivers/char/hvc_console.c                  |    8 drivers/char/tpm/tpm.c
> |    9 drivers/hid/hid-ids.h                       |    3 
> drivers/hid/usbhid/hid-quirks.c             |    1 
> drivers/hwmon/w83627ehf.c                   |   15 + drivers/md/linear.h
> |    2 drivers/md/md.c                             |   12 + 
> drivers/media/video/cx23885/cx23885-dvb.c   |    2 
> drivers/media/video/uvc/uvc_driver.c        |    2 
> drivers/media/video/uvc/uvc_video.c         |   10 - 
> drivers/media/video/uvc/uvcvideo.h          |    2 drivers/net/cnic.c
> |    4 drivers/net/e1000/e1000_hw.c                |    6 
> drivers/net/e1000e/netdev.c                 |    2 
> drivers/net/igb/igb_main.c                  |    2 
> drivers/net/igbvf/netdev.c                  |    2 
> drivers/net/irda/smsc-ircc2.c               |    2 
> drivers/net/ixgbe/ixgbe_main.c              |    2 drivers/net/rionet.c
> |    4 drivers/net/usb/asix.c                      |    4 
> drivers/net/wireless/b43/main.c             |    3 
> drivers/net/wireless/rt2x00/rt2x00usb.c     |   14 - 
> drivers/platform/x86/thinkpad_acpi.c        |    7 
> drivers/s390/cio/ccwgroup.c                 |   42 ++-- 
> drivers/scsi/3w-9xxx.c                      |    2 
> drivers/scsi/aacraid/commsup.c              |    2 drivers/scsi/ipr.c
> |    2 drivers/scsi/libiscsi_tcp.c                 |   14 - 
> drivers/scsi/libsas/sas_expander.c          |   14 - 
> drivers/scsi/qla2xxx/qla_init.c             |    3 
> drivers/scsi/qla2xxx/qla_isr.c              |    1 
> drivers/staging/quatech_usb2/quatech_usb2.c |    9 
> drivers/usb/class/cdc-acm.c                 |    3 drivers/usb/core/devio.c
> |    6 drivers/usb/core/quirks.c                   |   21 ++ 
> drivers/usb/host/ehci-hub.c                 |    7 
> drivers/usb/host/fhci-sched.c               |   19 +- 
> drivers/usb/host/xhci-mem.c                 |   22 +- 
> drivers/usb/mon/mon_bin.c                   |    2 
> drivers/usb/musb/musb_core.c                |    1 
> drivers/usb/serial/ftdi_sio.c               |   25 ++ 
> drivers/usb/serial/ftdi_sio_ids.h           |   13 + 
> drivers/usb/serial/pl2303.c                 |   27 ++ 
> drivers/usb/serial/pl2303.h                 |    5 
> drivers/usb/serial/qcserial.c               |    2 
> drivers/usb/storage/transport.c             |   34 ++- 
> drivers/video/carminefb.c                   |    6 
> drivers/watchdog/mtx-1_wdt.c                |    5 drivers/xen/events.c
> |    2 fs/cifs/cifssmb.c                           |    3 fs/eventpoll.c
> |   25 +- fs/ext4/ext4.h                              |    3 
> fs/ext4/extents.c                           |    1 fs/lockd/clntproc.c
> |    8 fs/nfsd/nfs4proc.c                          |    2 
> fs/nfsd/nfs4state.c                         |    2 fs/proc/base.c
> |   69 +++++-- fs/proc/kcore.c                             |    2 
> fs/splice.c                                 |    3 include/linux/ext2_fs.h
> |    4 include/linux/ext3_fs.h                     |    4 
> include/linux/interrupt.h                   |    5 
> include/linux/iocontext.h                   |    5 include/linux/jiffies.h
> |    2 include/linux/sunrpc/sched.h                |    4 include/net/scm.h
> |    5 kernel/irq/pm.c                             |   35 ++- kernel/kmod.c
> |    4 kernel/time.c                               |    2 
> lib/kobject_uevent.c                        |    2 mm/mmap.c
> |   20 +- net/9p/client.c                             |   13 - 
> net/atm/br2684.c                            |    7 net/bluetooth/l2cap.c
> |    3 net/bluetooth/rfcomm/sock.c                 |    1 net/core/scm.c
> |   10 - net/core/skbuff.c                           |    8 
> net/ipv6/ip6_output.c                       |    2 net/ipv6/ip6_tunnel.c
> |    4 net/sched/sch_api.c                         |   14 - 
> net/sunrpc/clnt.c                           |    3 net/sunrpc/sched.c
> |    1 net/wireless/nl80211.c                      |    9 
> net/wireless/reg.c                          |    1 net/x25/af_x25.c
> |    3 sound/pci/hda/patch_cirrus.c                |    2 
> sound/pci/hda/patch_realtek.c               |    6 
> sound/soc/codecs/ak4535.c                   |   10 - 
> sound/soc/codecs/ak4642.c                   |   22 +- 
> sound/soc/codecs/wm8940.c                   |    2 sound/soc/soc-jack.c
> |    2 122 files changed, 1318 insertions(+), 666 deletions(-)
> 
> 
> Al Viro (1): deal with races in /proc/*/{syscall,stack,personality}
> 
> Alexandre Bounine (1): drivers/net/rionet.c: fix ethernet address macros
> for LE platforms
> 
> Andrew Vasquez (1): qla2xxx: Correct inadvertent loop state transitions
> during port-update handling.
> 
> Aneesh Kumar K.V (1): fs/9p: Fid is not valid after a failed clunk.
> 
> Anton Blanchard (1): ipr: Always initiate hard reset in kdump kernel
> 
> Artur Zimmer (1): USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a
> zeitcontrol-device
> 

> Axel Lin (2): ASoC: wm8940: Properly set codec->dapm.bias_level

The above breaks the build I did here. It looks to me that this variable was
not introduced before 2.6.38:

  CC [M]  drivers/input/gameport/fm801-gp.o
sound/soc/codecs/wm8940.c: In function 'wm8940_set_bias_level':
sound/soc/codecs/wm8940.c:476: error: 'struct snd_soc_codec' has no member
named 'dapm'

commit ce6120cca2589ede530200c7cfe11ac9f144333c
Author: Liam Girdwood <lrg@slimlogic.co.uk>
Date:   Fri Nov 5 15:53:46 2010 +0200

    ASoC: Decouple DAPM from CODECs

- -Stefan

> ASoC: ak4535: fixup cache register table
> 
> Bernd Schubert (1): nfsd4: Remove check for a 32-bit cookie in
> nfsd4_readdir()
> 
> Carsten Otte (1): KVM: s390: check cpu_id prior to using it
> 
> Changli Gao (1): splice: direct_splice_actor() should not use pos in sd
> 
> Dan Carpenter (1): kcore: fix test for end of list
> 
> Dan Rosenberg (1): Bluetooth: Prevent buffer overflow in l2cap config
> request
> 
> Daniel Schwierzeck (1): atm: br2684: Fix oops due to skb->dev being NULL
> 
> David Henningsson (2): ALSA: HDA: Cirrus - fix "Surround Speaker" volume
> control name ALSA: HDA: Add new revision for ALC662
> 
> David S. Miller (1): sparc: Allow handling signals when stack is
> corrupted.
> 
> Denis Pershin (1): usb: cdc-acm: Owen SI-30 support
> 
> Eric Benoit (1): USB: pl2303: add id for SMART device
> 
> Eric Dumazet (2): scm: lower SCM_MAX_FD net_sched: Fix qdisc_notify()
> 
> Eric Van Hensbergen (1): net/9p: fix client code to fail more gracefully on
> protocol error
> 
> Filip Palian (1): Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to
> userspace.
> 
> Florian Echtler (1): USB: Serial: Add device ID for Sierra Wireless MC8305
> 
> Florian Fainelli (2): Revert "MIPS: MTX-1: Make au1000_eth probe all PHY 
> watchdog: mtx1-wdt: fix build failure
> 
> Greg Kroah-Hartman (3): Revert "x86, hotplug: Use mwait to offline a
> processor, fix the legacy case" Revert "usb: musb: restore INDEX register
> in resume path" Linux 2.6.32.47
> 
> Hakan Kvist (1): USB: ftdi_sio: add PID for Sony Ericsson Urban
> 
> Hendrik Brueckner (1): hvc_console: Improve tty/console put_chars handling
> 
> Herbert Xu (1): ipv6: Add GSO support on forwarding path
> 
> Hugh Dickins (1): vm: fix vm_pgoff wrap in upward expansion
> 
> Ian Campbell (3): sparc: fix array bounds error setting up PCIC NMI trap 
> xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend. genirq: Add
> IRQF_RESUME_EARLY and resume such IRQs earlier
> 
> Igor Mammedov (1): xen: x86_32: do not enable iterrupts when returning from
> exception in interrupt context
> 
> J. Bruce Fields (1): nfsd4: ignore WANT bits in open downgrade
> 
> Jack Wang (1): libsas: set sas_address and device type of rphy
> 
> James Bottomley (1): 3w-9xxx: fix iommu_iova leak
> 
> Jean Delvare (2): hwmon: (w83627ehf) Properly report thermal diode sensors 
> carminefb: Fix module parameters permissions
> 
> Jean-Christophe PLAGNIOL-VILLARD (1): USB: ftdi_sio: add Calao reference
> board support
> 
> Jeff Kirsher (1): e1000: Fix driver to be used on PA RISC C8000
> workstations
> 
> Jeff Layton (1): cifs: fix possible memory corruption in CIFSFindNext
> 
> Jeff Moyer (5): cfq: calculate the seek_mean per cfq_queue not per
> cfq_io_context cfq: merge cooperating cfq_queues cfq: change the meaning of
> the cfqq_coop flag cfq: break apart merged cfqqs if they stop cooperating 
> cfq: Don't allow queue merges for queues that have no process references
> 
> Jens Axboe (1): cfq-iosched: get rid of the coop_preempt flag
> 
> Jeremiah Matthey (1): HID: usbhid: Add support for SiGma Micro chip
> 
> Jerry Huang (1): QE/FHCI: fixed the CONTROL bug
> 
> Jiri Kosina (1): kmod: prevent kmod_loop_msg overflow in
> __request_module()
> 
> Joerg Roedel (1): iommu/amd: Fix wrong shift direction
> 
> Johannes Stezenbach (1): usbmon vs. tcpdump: fix dropped packet count
> 
> Josh Boyer (1): Update email address for stable patch submission
> 
> Josh Stone (1): x86: Fix compilation bug in kprobes' twobyte_is_boostable
> 
> Jouni Malinen (1): cfg80211: Fix validation of AKM suites
> 
> Kautuk Consul (2): staging: quatech_usb2: Potential lost wakeup scenario in
> TIOCMIWAIT xhci-mem.c: Check for ring->first_seg != NULL
> 
> Konrad Rzeszutek Wilk (1): xen/smp: Warn user why they keel over - nosmp or
> noapic and what to use instead.
> 
> Kuninori Morimoto (1): ASoC: ak4642: fixup cache register table
> 
> Linus Torvalds (1): vm: fix vm_pgoff wrap in stack expansion
> 
> Luben Tuikov (1): USB: storage: Use normalized sense when emulating
> autosense
> 
> Luciano Coelho (1): nl80211: fix overflow in ssid_len
> 
> Manoj Iyer (1): thinkpad-acpi: module autoloading for newer Lenovo
> ThinkPads.
> 
> Manual Munz (1): b43: Fix beacon problem in ad-hoc mode
> 
> Marek Marczykowski (1): xen-blkfront: fix data size for xenbus_gather in
> blkfront_connect
> 
> Marek Vasut (1): ASIX: Add AX88772B USB ID
> 
> Mark Brown (1): ASoC: Fix reporting of partial jack updates
> 
> Mark Nelson (1): ahci: Enable SB600 64bit DMA on Asus M3A
> 
> Mark Salyzyn (2): libsas: fix failure to revalidate domain for anything but
> the first expander child. libsas: fix panic when single phy is disabled on
> a wide port
> 
> Matthew Daley (1): x25: Prevent skb overreads when checking call user data
> 
> Mauro Carvalho Chehab (1): tuner_xc2028: Allow selection of the frequency
> adjustment code for XC3028
> 
> Michael Chan (1): cnic: Improve NETDEV_UP event handling
> 
> Michal Schmidt (1): GRO: fix merging a paged skb after non-paged skbs
> 
> Michal Sroczynski (1): USB: PL2303: correctly handle baudrates above
> 115200
> 
> Mike Christie (1): libiscsi_tcp: fix LLD data allocation
> 
> Milan Broz (1): kobj_uevent: Ignore if some listeners cannot handle
> message
> 
> Ming Lei (1): uvcvideo: Set alternate setting 0 on resume if the bus has
> been reset
> 
> NeilBrown (2): md/linear: avoid corrupting structure while waiting for
> rcu_free to complete. md: Fix handling for devices from 2TB to 4TB in 0.90
> metadata.
> 
> Nelson Elhage (1): epoll: fix spurious lockdep warnings
> 
> Oliver Neukum (1): USB: add RESET_RESUME for webcams shown to be quirky
> 
> Paul Fertser (1): plat-mxc: iomux-v3.h: implicitly enable pull-up/down when
> that's desired
> 
> Peter Huewe (2): TPM: Call tpm_transmit with correct size TPM: Zero buffer
> after copying to userspace
> 
> Peter Stuge (1): USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI
> Board
> 
> Philipp Hahn (1): KVM: x86: Reset tsc_timestamp on TSC writes
> 
> Rajkumar Manoharan (1): wireless: Reset beacon_found while updating
> regulatory
> 
> Randy Dunlap (1): irda: fix smsc-ircc2 section mismatch warning
> 
> Richard Weinberger (1): um: fix ubd cow size
> 
> Rigbert Hamisch (1): USB: qcserial: add device ID for "HP un2430 Mobile
> Broadband Module"
> 
> Sebastian Ott (1): ccwgroup: move attributes to attribute group
> 
> Serge Hallyn (1): USB: pid_ns: ensure pid is not freed during
> kill_pid_info_as_uid
> 
> Sonny Rao (1): powerpc/pci: Check devices status property when scanning OF
> tree
> 
> Sridhar Samudrala (1): net: Fix IPv6 GSO type checks in Intel ethernet
> drivers
> 
> Stanislaw Gruszka (1): rt2x00: do not drop usb dev reference counter on
> suspend
> 
> Stratos Psomadakis (1): Fix broken backport for IPv6 tunnels
> 
> Sudhakar Rajashekhara (1): ARM: davinci: da850 EVM: read mac address from
> SPI flash
> 
> Takashi Iwai (1): ALSA: hda/realtek - Avoid bogus HP-pin assignment
> 
> Theodore Ts'o (1): ext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL
> for new inodes
> 
> Trond Myklebust (1): NLM: Don't hang forever on NLM unlock requests
> 
> Vasily Averin (1): aacraid: reset should disable MSI interrupt
> 
> Venkateswararao Jujjuri (JV) (1): net/9p: Fix the msize calculation.
> 
> Wang Zhi (1): USB: EHCI: Do not rely on PORT_SUSPEND to stop USB resuming
> in ehci_bus_resume().
> 
> Yang Li (1): powerpc/mpic: Fix problem that affinity is not updated
> 
> Zheng Liu (1): ext4: fix BUG_ON() in ext4_ext_insert_extent()
> 
> hank (1): time: Change jiffies_to_clock_t() argument type to unsigned long
> 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQIcBAEBCgAGBQJOuQb2AAoJEOhnXe7L7s6jSTcQAMxOH5Ep28w6ncqGBfaumZ47
5+C9s7Lp9P5ci64bZjlT76O7/XVH4JLq39K4wwwbTelsuqzVtMnNGfxwZ6VYQwaK
VmUBANy96DHr3OFA+hIDzkdl5rp07CER7/Mqb4hAL8p2FPwxUxDLiwxxTQyFHc7Z
2ertwUAIbk1rOXd8gh18rMzeRlaGQVgVpLVh0myuFgG3uPKiDc1p7NOfkOviE1cC
geUiK5VqcKsLh10VzON2f1Z4jDz2+H/q/aReEumOL9LZ4o86boSkTQZnPER68Xi4
IDjuXSD7zOJ2RJPwK4tOLGp1Io2FufvsSfsuTAchuoQtRjYwGD/8M7u3ukKAvER1
zSaNCTvImjXQUAgbISZ5w5fKIyqwZPyw+1gMkMAGmhQ/7uUO/BV3i7bR16QBjq3k
j3XzfBfTqS48wO3FJWzgxi2PwEnkxV1OEc7m93iZweaJzXyrK5ncvtd1ghf6yD1q
IyqTjdXHmDaAchYS8Ktul6MyBDNdBhXzplQCAb03q5ldxcJ4NMKNGNAYB0O2h+kp
90ixHbO93ne/qiFdH+T1XQJqxR4rjmM3+JYVZS3YgS3dpLrgvPq2Z+X1hzjD1ehj
GnbpjvyHW3OG+vg5nyljFYut+fTrkBGgHxnhzawaiBC2XrtcEcrwElnMI9lVEr9j
Vb3Q1I3VDsUl9fFLF5rO
=iu15
-----END PGP SIGNATURE-----

  parent reply	other threads:[~2011-11-08 10:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-07 21:34 Linux 2.6.32.47 Greg KH
2011-11-07 21:34 ` Greg KH
2011-11-07 23:43 ` Christoph Biedl
2011-11-08  0:30   ` Greg KH
2011-11-08  7:22     ` Ian Campbell
2011-11-08  8:26       ` Christoph Biedl
2011-11-08  8:33         ` Ian Campbell
2011-11-08 22:40       ` Jiri Slaby
2011-11-08 23:35         ` Greg KH
2011-11-09  8:53           ` Ian Campbell
2011-11-18 22:23             ` Patch "genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier" has been added to the 2.6.32-longterm tree gregkh
2011-11-08 10:39 ` Stefan Bader [this message]
2011-11-08 23:43   ` Linux 2.6.32.47 Greg KH
2011-11-08 21:28 ` Jiri Slaby
2011-11-08 21:47 ` ppc: irq_choose_cpu breaks build [was: Linux 2.6.32.47] Jiri Slaby
2011-11-08 23:33   ` Greg KH
2011-11-08 23:46   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EB906F6.3010007@canonical.com \
    --to=stefan.bader@canonical.com \
    --cc=akpm@linux-foundation.org \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lwn@lwn.net \
    --cc=stable@kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.