All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 08/12] OMAP3 SPL: Add identify_nand_chip function
Date: Thu, 10 Nov 2011 07:25:46 +0100	[thread overview]
Message-ID: <4EBB6E6A.9070906@denx.de> (raw)
In-Reply-To: <1320858666-17113-9-git-send-email-trini@ti.com>

Hello Tom,

Tom Rini wrote:
> A number of boards are populated with a PoP chip for both DDR and NAND
> memory.  Other boards may simply use this as an easy way to identify
> board revs.  So we provide a function that can be called early to reset
> the NAND chip and return the result of NAND_CMD_READID.  All of this
> code is put into spl_id_nand.c and controlled via CONFIG_SPL_OMAP3_ID_NAND.
> 
> Signed-off-by: Tom Rini <trini@ti.com>
> ---
>  arch/arm/cpu/armv7/omap3/Makefile           |    3 +
>  arch/arm/cpu/armv7/omap3/spl_id_nand.c      |   83 +++++++++++++++++++++++++++
>  arch/arm/include/asm/arch-omap3/sys_proto.h |    1 +
>  3 files changed, 87 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/omap3/spl_id_nand.c
> 
> diff --git a/arch/arm/cpu/armv7/omap3/spl_id_nand.c b/arch/arm/cpu/armv7/omap3/spl_id_nand.c
> new file mode 100644
> index 0000000..edf3ded
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/omap3/spl_id_nand.c
> @@ -0,0 +1,83 @@
[...]
> +void identify_nand_chip(int *mfr, int *id)
> +{
> +	/* Make sure that we have setup GPMC for NAND correctly. */
> +	writel(M_NAND_GPMC_CONFIG1, &gpmc_config->cs[0].config1);
> +	writel(M_NAND_GPMC_CONFIG2, &gpmc_config->cs[0].config2);
> +	writel(M_NAND_GPMC_CONFIG3, &gpmc_config->cs[0].config3);
> +	writel(M_NAND_GPMC_CONFIG4, &gpmc_config->cs[0].config4);
> +	writel(M_NAND_GPMC_CONFIG5, &gpmc_config->cs[0].config5);
> +	writel(M_NAND_GPMC_CONFIG6, &gpmc_config->cs[0].config6);
> +
> +	/* Enable the GPMC Mapping */
> +	writel((((GPMC_SIZE_128M & 0xF) << 8) | ((NAND_BASE >> 24) & 0x3F) |
                                     ^     ^                         ^
> +				(1 << 6)), &gpmc_config->cs[0].config7);
                                ^^^^^^^^

Please substitute this magic values through defines.

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

  reply	other threads:[~2011-11-10  6:25 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-09 17:10 [U-Boot] [PATCH v3 0/12] Add more framework to OMAP3 SPL, port more boards Tom Rini
2011-11-09 17:10 ` [U-Boot] [PATCH v3 01/12] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() Tom Rini
2011-11-09 17:10 ` [U-Boot] [PATCH v3 02/12] OMAP3: Add a helper function to set timings in SDRC Tom Rini
2011-11-09 17:10 ` [U-Boot] [PATCH v3 03/12] OMAP3: Change mem_ok to clear again after reading back Tom Rini
2011-11-09 17:10 ` [U-Boot] [PATCH v3 04/12] OMAP3: Remove get_mem_type prototype Tom Rini
2011-11-09 17:10 ` [U-Boot] [PATCH v3 05/12] OMAP3: Add optimal SDRC autorefresh control values Tom Rini
2011-11-10  6:20   ` Heiko Schocher
2011-11-10 21:32     ` Robert Hurdle
2011-11-17 21:44     ` Tom Rini
2011-11-09 17:11 ` [U-Boot] [PATCH v3 06/12] OMAP3: Suffix all Micron memory timing parts with their speed Tom Rini
2011-11-10  6:23   ` Heiko Schocher
2011-11-17 21:50     ` Tom Rini
2011-11-09 17:11 ` [U-Boot] [PATCH v3 07/12] OMAP3 SPL: Rework memory initalization and devkit8000 support Tom Rini
2011-11-09 17:11 ` [U-Boot] [PATCH v3 08/12] OMAP3 SPL: Add identify_nand_chip function Tom Rini
2011-11-10  6:25   ` Heiko Schocher [this message]
2011-11-17 22:36     ` Tom Rini
2011-11-09 17:11 ` [U-Boot] [PATCH v3 09/12] OMAP3: Add SPL support to Beagleboard Tom Rini
2011-11-10  6:28   ` Heiko Schocher
2011-11-10 14:34     ` Tom Rini
2011-11-10 14:46       ` Heiko Schocher
2011-11-09 17:11 ` [U-Boot] [PATCH v3 10/12] OMAP3: Add SPL support to omap3_evm Tom Rini
2011-11-09 17:11 ` [U-Boot] [PATCH v3 11/12] AM3517: Add SPL support Tom Rini
2011-11-09 17:11 ` [U-Boot] [PATCH v3 12/12] AM3517 CraneBoard: " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EBB6E6A.9070906@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.