From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4EBB9104.2040203@domain.hid> Date: Thu, 10 Nov 2011 09:53:24 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <2AB71B0EA2424A6C953F1BA9E4D51A79@domain.hid> In-Reply-To: <2AB71B0EA2424A6C953F1BA9E4D51A79@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Xenomai test progs segfault List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Terry Fryar Cc: xenomai@xenomai.org On 11/10/2011 12:37 AM, Terry Fryar wrote: > Using 2.6.38 omap kernel on beagleboard xm-c, with 2.5.6 Xenomai and 2.6.38 > adeos patch. Adeos patches went through with no errors. I do have a > "tweaked" omap3 board file (gpio's and such), but this is a pretty > straightforward kernel (PREEMPT, no power mgmt, no SMP). Using Codesourcery > 2010.09-50 as tool chain on host. > > Looks like the kernel is ok on boot: > > [ 0.969854] I-pipe: Domain Xenomai registered. > [ 0.969900] Xenomai: hal/arm started. > [ 0.971906] Xenomai: scheduling class idle registered. > [ 0.971937] Xenomai: scheduling class rt registered. > [ 1.026001] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded. > [ 1.026763] Xenomai: starting native API services. > [ 1.027046] Xenomai: starting RTDM services. > > > If I try to run "latency", or some of the other test programs I get a > segfault. GDB says it's getting a signal SIGXCPU?? > > Been through the kernel .config many, many times! Not sure where to go from > here? Any suggestions? Ah, sorry, xenomai 2.5.6 does not support linux 2.6.38 on arm. You need xenomai 2.6.0. In case 2.5.6 was a typo and you were already using 2.6.0, please post your .config. > > Thanks! > > > > > > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help -- Gilles.