From: Mario van der Linde <linde@b1-systems.de>
To: ceph-devel@vger.kernel.org
Subject: Re: rbd - input/output error
Date: Mon, 14 Nov 2011 22:30:12 +0100 [thread overview]
Message-ID: <4EC18864.4010308@b1-systems.de> (raw)
In-Reply-To: <Pine.LNX.4.64.1111141148220.29742@cobra.newdream.net>
[-- Attachment #1.1: Type: text/plain, Size: 1258 bytes --]
Hello,
On 14.11.2011 20:48, Sage Weil wrote:
> On Sun, 13 Nov 2011, Mario van der Linde wrote:
[...]
>>> ceph1:~ # modprobe rbd
>>> ceph1:~ # rbd create testimg --size 10240
>>> create error: error 5: Input/output error
>
> Can you try with
>
> rbd create testmsg --size 10240 --log-to-stderr --debug-ms 1
>
> so we can see a bit more about what is going on?
This one gave me some output:
rbd create testimg --size=10240 --log-to-stderr 2 --debug-ms 2
See attached file.
Additional Info:
> ceph5:~ # modinfo rbd
> filename: /lib/modules/3.1.0-rc9-1-desktop/kernel/drivers/block/rbd.ko
> license: GPL
> author: Jeff Garzik <jeff@garzik.org>
> description: rados block device
> author: Yehuda Sadeh <yehuda@hq.newdream.net>
> author: Sage Weil <sage@newdream.net>
> srcversion: C8F4E38D4A716AB32B9F75C
> depends:
> vermagic: 3.1.0-rc9-1-desktop SMP preempt mod_unload modversions
Regards
Mario
--
Mario van der Linde
Linux Consultant & Trainer
Tel.: +49-151-16879485
Mail: linde@b1-systems.de
B1 Systems GmbH
Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de
GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537
[-- Attachment #1.2: ceph_failure.out --]
[-- Type: text/plain, Size: 5760 bytes --]
ceph5:~ # rbd create testimg --size=10240 --log-to-stderr 2 --debug-ms 2
2011-11-14 22:22:01.046036 7fa0dff51720 -- :/0 messenger.start
2011-11-14 22:22:01.046320 7fa0dff51720 -- :/1007622 --> 192.168.1.222:6789/0 -- auth(proto 0 30 bytes) v1 -- ?+0 0x7a60f0 con 0x7a5e80
2011-11-14 22:22:01.046576 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).connect error 192.168.1.222:6789/0, 111: Connection refused
2011-11-14 22:22:01.046616 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).fault 111: Connection refused
2011-11-14 22:22:01.046659 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).fault first fault
2011-11-14 22:22:01.046962 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).connect error 192.168.1.222:6789/0, 111: Connection refused
2011-11-14 22:22:01.046977 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).fault 111: Connection refused
2011-11-14 22:22:01.247422 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).connect error 192.168.1.222:6789/0, 111: Connection refused
2011-11-14 22:22:01.247448 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).fault 111: Connection refused
2011-11-14 22:22:01.647881 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).connect error 192.168.1.222:6789/0, 111: Connection refused
2011-11-14 22:22:01.647923 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).fault 111: Connection refused
2011-11-14 22:22:02.448373 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).connect error 192.168.1.222:6789/0, 111: Connection refused
2011-11-14 22:22:02.448414 7fa0dff4f700 -- :/1007622 >> 192.168.1.222:6789/0 pipe(0x7a5c10 sd=3 pgs=0 cs=0 l=0).fault 111: Connection refused
2011-11-14 22:22:04.046398 7fa0db8db700 -- :/1007622 mark_down 0x7a5e80 -- 0x7a5c10
2011-11-14 22:22:04.046564 7fa0db8db700 -- :/1007622 --> 192.168.1.221:6789/0 -- auth(proto 0 30 bytes) v1 -- ?+0 0x7a6a70 con 0x7a67b0
2011-11-14 22:22:04.047314 7fa0da8d9700 -- 192.168.1.225:0/1007622 learned my addr 192.168.1.225:0/1007622
2011-11-14 22:22:05.051649 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 1 ==== auth_reply(proto 1 0 Success) v1 ==== 24+0+0 (538567308 0 0) 0x7a6a70 con 0x7a67b0
2011-11-14 22:22:05.051723 7fa0dc8dd700 -- 192.168.1.225:0/1007622 --> 192.168.1.221:6789/0 -- mon_subscribe({monmap=0+}) v1 -- ?+0 0x7a60f0 con 0x7a67b0
2011-11-14 22:22:05.051953 7fa0dff51720 -- 192.168.1.225:0/1007622 --> 192.168.1.221:6789/0 -- mon_subscribe({monmap=0+,osdmap=0}) v1 -- ?+0 0x7a5c10 con 0x7a67b0
2011-11-14 22:22:05.051994 7fa0dff51720 -- 192.168.1.225:0/1007622 --> 192.168.1.221:6789/0 -- mon_subscribe({monmap=0+,osdmap=0}) v1 -- ?+0 0x7a6cf0 con 0x7a67b0
2011-11-14 22:22:05.052966 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 2 ==== mon_map v1 ==== 469+0+0 (2361102807 0 0) 0x7a5df0 con 0x7a67b0
2011-11-14 22:22:05.053015 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 3 ==== mon_subscribe_ack(300s) v1 ==== 20+0+0 (2408960605 0 0) 0x7a60f0 con 0x7a67b0
2011-11-14 22:22:05.053206 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 4 ==== mon_map v1 ==== 469+0+0 (2361102807 0 0) 0x7a5df0 con 0x7a67b0
2011-11-14 22:22:05.053256 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 5 ==== osd_map(52..52 src has 1..52) v2 ==== 3463+0+0 (777870650 0 0) 0x7a7b70 con 0x7a67b0
2011-11-14 22:22:05.053462 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 6 ==== mon_subscribe_ack(300s) v1 ==== 20+0+0 (2408960605 0 0) 0x7a5c10 con 0x7a67b0
2011-11-14 22:22:05.053490 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 7 ==== mon_map v1 ==== 469+0+0 (2361102807 0 0) 0x7a7d90 con 0x7a67b0
2011-11-14 22:22:05.053767 7fa0dff51720 -- 192.168.1.225:0/1007622 --> 192.168.1.224:6800/3212 -- osd_op(client.4236.0:1 testimg.rbd [stat 0~0] 2.e35ad169) v1 -- ?+0 0x7a6d20 con 0x7a9ad0
2011-11-14 22:22:05.053908 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 8 ==== osd_map(52..52 src has 1..52) v2 ==== 3463+0+0 (777870650 0 0) 0x7a7000 con 0x7a67b0
2011-11-14 22:22:05.053959 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== mon.0 192.168.1.221:6789/0 9 ==== mon_subscribe_ack(300s) v1 ==== 20+0+0 (2408960605 0 0) 0x7a9e80 con 0x7a67b0
2011-11-14 22:22:05.055250 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== osd.4 192.168.1.224:6800/3212 1 ==== osd_op_reply(1 testimg.rbd [stat 0~0] = -2 (No such file or directory)) v2 ==== 102+0+0 (1670433998 0 0) 0x7a6d20 con 0x7a9ad0
2011-11-14 22:22:05.055368 7fa0dff51720 -- 192.168.1.225:0/1007622 --> 192.168.1.224:6800/3212 -- osd_op(client.4236.0:2 rbd_info [write 0~0] 2.ac0e573a) v1 -- ?+0 0x7a6fa0 con 0x7a9ad0
2011-11-14 22:22:05.069088 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== osd.4 192.168.1.224:6800/3212 2 ==== osd_op_reply(2 rbd_info [write 0~0] ack = 0) v2 ==== 99+0+0 (3424702940 0 0) 0x7a6d20 con 0x7a9ad0
2011-11-14 22:22:05.069182 7fa0dff51720 -- 192.168.1.225:0/1007622 --> 192.168.1.224:6800/3212 -- osd_op(client.4236.0:3 rbd_info [call rbd.assign_bid] 2.ac0e573a) v1 -- ?+0 0x7a5cd0 con 0x7a9ad0
2011-11-14 22:22:05.069655 7fa0dc8dd700 -- 192.168.1.225:0/1007622 <== osd.4 192.168.1.224:6800/3212 3 ==== osd_op_reply(3 rbd_info [call] = -5 (Input/output error)) v2 ==== 99+0+0 (559231618 0 0) 0x7a6d20 con 0x7a9ad0
2011-11-14 22:22:05.069712 7fa0dff51720 librbd: failed to assign a block name for image
create error: error 5: Input/output error
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2011-11-14 21:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-13 10:15 rbd - input/output error Mario van der Linde
2011-11-14 19:48 ` Sage Weil
2011-11-14 21:30 ` Mario van der Linde [this message]
2011-11-14 21:39 ` Sage Weil
2011-11-14 21:59 ` Mario van der Linde
2011-11-14 22:05 ` Tommi Virtanen
2011-11-14 22:17 ` [solved] " Mario van der Linde
2011-11-14 22:09 ` Sage Weil
2011-11-14 22:13 ` Tommi Virtanen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EC18864.4010308@b1-systems.de \
--to=linde@b1-systems.de \
--cc=ceph-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.