All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <zonque@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>,
	dri-devel@lists.freedesktop.org, jbarnes@virtuousgeek.org,
	harald@redhat.com, Keith Packard <keithp@keithp.com>,
	linux-kernel@vger.kernel.org
Subject: Re: Strange effect with i915 backlight controller
Date: Wed, 16 Nov 2011 13:58:57 +0100	[thread overview]
Message-ID: <4EC3B391.90001@gmail.com> (raw)
In-Reply-To: <s5h1utb6l9s.wl%tiwai@suse.de>

On 11/14/2011 11:39 AM, Takashi Iwai wrote:
> OK, then perhaps a better fix is to change the check to be equivalent
> with pineview, as you mentioned in the original post.  The handling of
> bit 0 for old chips was lost during the refactoring of backlight code
> since 2.6.37.
> 
> Does the patch below work for you?
> 
> The only concern by this fix is that it changes the max value.  If
> apps expect some certain (e.g. recorded) value, it may screw up.  But
> I don't expect this would happen with sane apps.

Works perfectly - let's ship it :)


Thanks again,
Daniel


> ===
> From: Takashi Iwai <tiwai@suse.de>
> Subject: drm/i915: Fix invalid backpanel values for GEN3 or older chips
> 
> While refactoring of backlight control code in commit [a95735569:
> drm/i915: Refactor panel backlight controls], the handling of the bit
> 0 of duty-cycle was gone except for pineview.  This resulted in invalid
> register values for old chips like 915GM.  When the bit 0 is set, the
> backlight is turned off suddenly.
> 
> This patch changes the bit-0 check by replacing with the condition of
> gen < 4 (pineview is included in this condition, too).
> 
> Reported-by: Daniel Mack <zonque@gmail.com>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
>  drivers/gpu/drm/i915/intel_panel.c |    8 +++-----
>  1 files changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 499d4c0..737d00f 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -178,12 +178,10 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
>  	if (HAS_PCH_SPLIT(dev)) {
>  		max >>= 16;
>  	} else {
> -		if (IS_PINEVIEW(dev)) {
> +		if (INTEL_INFO(dev)->gen < 4) {
>  			max >>= 17;
>  		} else {
>  			max >>= 16;
> -			if (INTEL_INFO(dev)->gen < 4)
> -				max &= ~1;
>  		}
>  
>  		if (is_backlight_combination_mode(dev))
> @@ -203,7 +201,7 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
>  		val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
>  	} else {
>  		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
> -		if (IS_PINEVIEW(dev))
> +		if (INTEL_INFO(dev)->gen < 4)
>  			val >>= 1;
>  
>  		if (is_backlight_combination_mode(dev)) {
> @@ -246,7 +244,7 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level
>  	}
>  
>  	tmp = I915_READ(BLC_PWM_CTL);
> -	if (IS_PINEVIEW(dev)) {
> +	if (INTEL_INFO(dev)->gen < 4) {
>  		tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
>  		level <<= 1;
>  	} else


  parent reply	other threads:[~2011-11-16 12:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-04 14:36 Strange effect with i915 backlight controller Daniel Mack
2011-11-08  0:57 ` Daniel Mack
2011-11-10 15:11   ` Daniel Mack
2011-11-10 15:39     ` Takashi Iwai
2011-11-13 16:24       ` Daniel Mack
2011-11-14 10:39         ` Takashi Iwai
2011-11-14 12:03           ` Daniel Mack
2011-11-14 13:05             ` Takashi Iwai
2011-11-16 12:58           ` Daniel Mack [this message]
2011-11-16 17:15             ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EC3B391.90001@gmail.com \
    --to=zonque@gmail.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=harald@redhat.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=keithp@keithp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.