From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4ECCB27F.3040903@domain.hid> Date: Wed, 23 Nov 2011 09:44:47 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <4ECA2FF8.7040406@domain.hid> <4ECA5E12.5040907@domain.hid> <4ECB967C.70509@domain.hid> In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] [xenomai-help] Error return with a4l_sync_write List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Alexis Berlemont Cc: xenomai@xenomai.org, Hadrien Caron On 11/22/2011 11:33 PM, Alexis Berlemont wrote: > On Tue, Nov 22, 2011 at 2:43 PM, Hadrien Caron wrote: >> Alexis : yes I am using the Analogy drivers . . . Would that mean that >> analog output is implemented but not digital output for National Instrument >> acquisition cards ? Has someone tried this already ? Seems strange that >> analog output would be implemented but not digital. >> >> Anders : Ok ! I will look into rebulding my xenomai installation then ! > > According to the thread: > [Xenomai-core] Problems with gcc 4.6.0 (rt_task_shadow fails with ENOSYS) > https://mail.gna.org/public/xenomai-core/2011-07/msg00010.html > The problem related by Anders Blomdell is supposed to be fixed with > the 2.6 release, isn't it? > > Could you tell us which version of Xenomai and which driver > (ni_pcimio, ...) you are using? Hi, the problem is not fixed, we can not compile xenomai without frame pointers. -- Gilles.