From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: Antti Palosaari <crope@iki.fi>
Cc: linux-media@vger.kernel.org, Michael Krufky <mkrufky@kernellabs.com>
Subject: Re: [GIT PULL FOR 3.2] misc small changes, mostly get/set IF related
Date: Thu, 24 Nov 2011 17:58:33 -0200 [thread overview]
Message-ID: <4ECEA1E9.2000107@redhat.com> (raw)
In-Reply-To: <4EC01892.3090307@iki.fi>
Em 13-11-2011 17:20, Antti Palosaari escreveu:
> Mauro,
> and these too for 3.3. Sorry about mistakes.
In fact, those 3 patches seemed to be good for 3.2:
576b849 [media] mxl5007t: fix reg read
d7d89dc [media] tda18218: fix 6 MHz default IF frequency
ff83bd8 [media] af9015: limit I2C access to keep FW happy
So, I've backported d7d89dc to 3.2, and applied there. the others,
I've added for 3.3.
>
> regards
> Antti
>
> On 11/13/2011 09:12 PM, Antti Palosaari wrote:
>> Moro
>>
>> These patches are rather small enchantments and should not have any
>> visible effect.
>>
>> mxl5007t change is that register read fix I have mentioned earlier. Reg
>> read is used only for checking chip ID and even if ID is not detected
>> correctly it will still work. So no functional changes.
>>
>> Antti
>>
>> The following changes since commit
>> df5f76dfef9bfaec1ff27d0a60a57a773bf87f0f:
>>
>> af9015: limit I2C access to keep FW happy (2011-11-13 03:33:30 +0200)
>>
>> are available in the git repository at:
>> git://linuxtv.org/anttip/media_tree.git af9015
>>
>> Antti Palosaari (12):
>> tda18218: implement .get_if_frequency()
>> tda18218: fix 6 MHz default IF frequency
>> af9013: use .get_if_frequency() when possible
>> mt2060: implement .get_if_frequency()
>> qt1010: implement .get_if_frequency()
>> tda18212: implement .get_if_frequency()
>> tda18212: round IF frequency to close hardware value
>> cxd2820r: switch to .get_if_frequency()
>> cxd2820r: check bandwidth earlier for DVB-T/T2
>> mxl5007t: fix reg read
>> ce6230: remove experimental from Kconfig
>> ce168: remove experimental from Kconfig
>>
>> drivers/media/common/tuners/mt2060.c | 9 +++-
>> drivers/media/common/tuners/mxl5007t.c | 3 +-
>> drivers/media/common/tuners/qt1010.c | 9 +++-
>> drivers/media/common/tuners/tda18212.c | 17 +++++++-
>> drivers/media/common/tuners/tda18218.c | 18 ++++++-
>> drivers/media/common/tuners/tda18218_priv.h | 2 +
>> drivers/media/dvb/dvb-usb/Kconfig | 4 +-
>> drivers/media/dvb/dvb-usb/anysee.c | 7 ---
>> drivers/media/dvb/frontends/af9013.c | 43 ++++--------------
>> drivers/media/dvb/frontends/cxd2820r.h | 13 ------
>> drivers/media/dvb/frontends/cxd2820r_c.c | 13 +++++-
>> drivers/media/dvb/frontends/cxd2820r_t.c | 55 +++++++++++++----------
>> drivers/media/dvb/frontends/cxd2820r_t2.c | 62 +++++++++++++++------------
>> drivers/media/video/em28xx/em28xx-dvb.c | 7 ---
>> 14 files changed, 140 insertions(+), 122 deletions(-)
>>
>>
>
>
next prev parent reply other threads:[~2011-11-24 19:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-13 19:12 [GIT PULL FOR 3.2] misc small changes, mostly get/set IF related Antti Palosaari
2011-11-13 19:20 ` Antti Palosaari
2011-11-24 19:58 ` Mauro Carvalho Chehab [this message]
2011-11-24 23:11 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ECEA1E9.2000107@redhat.com \
--to=mchehab@redhat.com \
--cc=crope@iki.fi \
--cc=linux-media@vger.kernel.org \
--cc=mkrufky@kernellabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.